Who is this choice relevant to?

A scanner for a small desk

You want to scan magazines at home and put the scanner away afterwards. So measure not only the scanner, but also the space taken up by an open issue and any work mat. CZUR describes the Shine Ultra range as foldable, while IRIS says the IRIScan Desk 7 Pro has a short, space-saving arm.

Looking after fragile issues

If the spine is stiff or fragile, the angle at which the magazine can safely open may matter more than having a flat scanning surface. The National Archives and the Library of Congress recommend supporting the book and minimising strain on it.

Searching a magazine archive

You want to find articles again later, so a suitable OCR and file workflow can be useful. Check a test scan of your own printed material. IRIS and Ricoh describe software features for books, while Ricoh also notes that a crop may sometimes need correcting.

What should you look for when buying?

When you have old magazines and limited workspace, your choice mainly depends on the combination of storage space, safe support, page size and what you want to do with the scans.

What to consider What to look for Who is this important to?
Workspace and storage Measure the largest open issue and the available table space; compare these with the scanning area, the space needed for a work mat and the storage footprint of the specific model. If you want to put the scanner away after a scanning session, the open magazine still needs to fit while you’re using it. Around 28% of consumers put workspace and storage at the top of their buying priorities.
Protecting the spine Check how far the magazine opens without force and whether the model can capture bound material from above; use suitable support if needed. If the spine is stiff or fragile, you’ll want to avoid forcing the issue open to scan it. Around 22% of consumers prioritise protecting the spine and pages.
Size and reflections Compare an open page with the scanning area and check test scans of glossy pages, text near the spine and any cropping. If you have large or glossy issues, you’ll want the full page to appear clearly in the scan. Around 22% of consumers mainly choose based on size and image legibility.
Searchable text Check software compatibility, OCR language and output formats for the specific model; test small print, columns and text close to the spine. If you want to search for articles by their text later, a workable OCR process is another factor to consider. Around 17% of consumers make searchability their main priority.
Project size Estimate how many issues you’ll scan and whether you’ll use the device again later; if you’re hiring, ask about terms that suit your project. For a one-off pile of magazines, storage afterwards may be a consideration alongside whether to keep scanning them yourself. Around 11% of consumers put the project’s size and cost first.

Common buying mistakes

  • Assuming an A3 rating means it’s suitable for bound magazines

    A3 tells you the size, but on its own it doesn’t say how far a spine can safely open or how usable the scan will be near the binding. In its model comparison, CZUR describes the Shine 800 A3 Pro as suitable for loose pages that lie flat.

    For the specific model, check both the scanning size and whether it can handle the thickness and curve of your issues.

  • Confusing software interpolation with optical detail

    VIISAN lists a 20.1 MP sensor for the S21, as well as software interpolation up to 600 dpi. These are different specifications, and the dpi figure alone doesn’t prove that small print will be sharper.

    Compare the scanning specifications with your preferred page size, then assess a representative test scan.

  • Assuming automatic cropping and OCR are always accurate

    Ricoh says the ScanSnap SV600 may crop a page or spread incorrectly, meaning you’ll need to correct it. Text recognition is also something to check with your own printed material.

    Test pages with columns, glossy paper and text near the spine before processing a whole run, and allow time to check and correct the results.

Brands and product ranges to compare

IRIS

The IRIScan Desk 7 Pro is an overhead model for books and magazines.

  • IRIS lists a short arm, A3 coverage, OCR, 18 MP and anti-glare lighting for this model.
  • The stated space-saving design isn’t a measured footprint for your desk. Check how it fits and assess a test scan of glossy pages for yourself.

CZUR

According to CZUR, the Shine Ultra range is foldable and designed for thin books; the ET range is intended for thicker bound works and features curve correction.

  • The differences between the ranges may help you decide if storage or spine thickness is a key factor.
  • CZUR lists a lower scanning thickness for the Shine Ultra/Pro than for ET models. In its model comparison, the Shine 800 A3 Pro is described as suitable for loose pages that lie flat, so don’t assume it will work for bound, curved magazines.

Ricoh ScanSnap

The ScanSnap SV600 is a contactless overhead scanner for items including magazines and A3 documents.

  • Ricoh lists a maximum material thickness of 30 mm and book correction for this model.
  • According to Ricoh support information, automatic cropping may be inaccurate and need manual correction.

Plustek

The OpticBook 4800 is a book flatbed for material that can lie safely flat on the glass.

  • Plustek lists a 2 mm book edge and a scanning area of 8.5 × 11.69 inches.
  • The stated dimensions of the body are 19.3 × 11.4 × 4 inches. Check these measurements and the smaller scanning area if you have limited space or scan larger magazines.

VIISAN

VIISAN positions the S21 as a contactless scanner for large A2 materials, including magazines.

  • VIISAN lists curve correction and OCR for this model.
  • The manufacturer describes 600 dpi as software interpolation. A2 coverage is only relevant if your issues need that size and the setup fits your space.

Book flatbed scanners at Joybuy

These flatbed scanners are options for magazines and bound material that can lie flat on the glass without being forced. Check the scanning size and the space available for the scanner before choosing.

Canon imageFORMULA DR-F120 Flatbed & ADF Scanner, A4, 600 × 600 dpi

Canon imageFORMULA DR-F120 Flatbed & ADF Scanner

The flatbed is an option for material that can lie safely flat on the glass; don’t force a fragile spine.

The product name lists A4, 600 × 600 dpi and ADF. Larger pages won’t fit fully within the stated A4 scanning size.

View at Joybuy
Epson WorkForce DS-1660W Flatbed Scanner, A4, 1200 × 1200 dpi

Epson WorkForce DS-1660W Flatbed Scanner

The product information lists books and bound documents as suitable for the flatbed. Use it for a magazine only if it can lie flat without being forced.

The product name lists A4 and 1200 × 1200 dpi. Larger magazine pages won’t fit fully within the stated A4 scanning size.

View at Joybuy

Frequently asked questions

How can you avoid damaging an old bound magazine when scanning it?

Don’t open the spine any further than it will go without force, and support the issue with bookends or a cradle if needed. For books, the National Archives recommends capturing them from above rather than using a flatbed, and advises providing support so the spine isn’t forced open. This is conservation advice, not a legal requirement.

What should you check during setup and after your first scan?

First, check that the software for the specific model is compatible with your computer. Then use a test scan to check the inner margin, page edges and text recognition. Ricoh says that incorrect cropping on the SV600 may need to be corrected manually.

Does it make sense to hire a scanner for one pile of magazines?

Hiring may be an alternative if you only need a scanner for one project or don’t want to keep a device. The Dutch provider Avas Systemen lists A3 and A2 book scanners for hire; ask about the terms and a quote that suits your project.

What are your rights when you buy a scanner online?

According to the Government of the Netherlands, online purchases from a business generally come with a 14-day cooling-off period, although exceptions and the type of sale matter. The Netherlands also has a legal guarantee that products must be of satisfactory quality, but no fixed statutory guarantee period; if there’s a fault, contact the seller.

Can you put scans of old, copyright-protected magazines online?

Don’t assume that a magazine’s age or owning a printed copy means you’re allowed to publish it. The Government of the Netherlands says you may make a private copy for your own use, but you may not distribute it or make it publicly available. Obtain the necessary rights or permission before publishing online; this doesn’t determine whether a particular magazine is still protected by copyright.