Creator filming glossy cards
You want to avoid reflections making text on cards or laminated pieces difficult to read. That’s why you want to be able to move and direct the light source.
Choose a complete kit if you don’t already have a suitable continuous light and stands. If you do, a standalone softbox may be enough, as long as the fitting is compatible. Move the light and check in a test shot that glossy cards remain legible and the whole board is visible. A larger light modifier takes up more space, while a grid helps direct the light, but won’t prevent reflections on its own.
You want to avoid reflections making text on cards or laminated pieces difficult to read. That’s why you want to be able to move and direct the light source.
You’re starting without a suitable continuous light or stand, and want to check in advance whether a complete kit includes all the parts you need.
You already have a light, but want to check the fitting and the space available around the table before choosing a standalone softbox.
First, work out whether you already have a compatible continuous light. Then check the fitting, the space around the table and the view of the entire board.
| What to consider | What should you look for? | Who is this important for? |
|---|---|---|
| Reflections and readability | Move the light in relation to the camera and table. Try a grid if one is included with the softbox, then check again that the edges of the board remain visible. | If I’m filming glossy cards, I want to be able to read the text through the camera; around 31% of consumers prioritise reflections and readability. |
| Coverage and space | Measure the available space for positioning the light and take a test shot of the whole board, not just a close-up. | I want to keep the whole game in shot without the setup taking up too much space beside the table; around 25% of consumers prioritise full table coverage. |
| Fitting and kit contents | Check the fitting and which parts are included, such as the light, power supply, softbox, grid and stand. | If I don’t already have a suitable light, I want to know whether all the necessary parts are compatible; around 25% of consumers prioritise a complete or compatible setup. |
| Consistent video footage | Film a short clip using your intended camera and light settings. Check the colours and look out for visible bands of light. | During a longer explanation, I want the footage and colours to remain consistent; around 19% of consumers pay most attention to this. |
A softbox is a light modifier and needs a compatible light source. According to NEEWER, the standalone softbox for the NEEWER 660 panel is supplied without the panel.
Depending on what you already own, you may still need a light, power supply or stand.
Compare the box contents part by part and check that the fitting is compatible with your existing light.
The shape and position of the light source can still show up on glossy cards. Diffused light alone doesn’t guarantee that text will be free from reflections.
Take a test shot from the final camera position and move the light until the reflection no longer falls across the text.
A light output stated for a particular measurement setup doesn’t necessarily tell you how much light will reach the board once you’ve fitted the softbox.
Only compare figures measured under the same conditions, and assess the final setup with a test shot.
Godox offers standalone rectangular softboxes with a Bowens mount, including the SB-FW6090 with grid, for use with a compatible continuous light.
The RA-R6090 is a standalone rectangular softbox with a grid, designed for a compatible Bowens light.
The Light Dome 60 is a round Bowens softbox for an existing, compatible light.
NEEWER offers both a softbox for the 660 LED panel and a complete 660 kit with panels, softboxes and stands.
No. A standalone softbox is a light modifier and needs a compatible light source. Also check whether a stand and power supply are included; the standalone NEEWER panel softbox is supplied without the LED panel.
First, take a test shot from the final camera position. Move or turn the light until the reflection no longer falls across the text. Use a grid if your softbox has one, then check that the edges of the board remain visible.
Test with the camera and light you’ll actually be using. Canon Europe explains that artificial light, including LED lighting, can cause banding at certain shutter settings. With lighting associated with 50 Hz, for example, you could try shutter speeds of 1/50 or 1/100 of a second and check the result in your video.
For a consumer purchase, you’re covered by the legal guarantee if a product doesn’t meet what you could reasonably expect under normal use; ACM ConsuWijzer states that the seller must put this right. For an online purchase, you generally have up to 14 days after delivery to change your mind, subject to legal exceptions.
Follow the instructions for your exact model when taking it apart and putting it away. Before storing it, check that the diffuser fabric, grid and fittings are dry and stored properly.