Who is this choice relevant to?

Portrait editor assessing greyscale

You assess skin tones, shadows and highlights on the main screen and want to know whether the second screen can be used mainly for tools.

Photographer comparing two images

You display portraits or edited versions on both screens, so separate profiling and consistent display are important to you.

Portrait photographer who prints

You want to assess your on-screen decisions in print too, so alongside a calibrated monitor you need a suitable print profile and a soft proof.

What should you look for when choosing?

First, decide whether you’ll use both screens to assess tones. This determines how much attention you’ll need to give to calibration and consistency between the screens.

Consideration What to look for Who it matters to
Greyscale and uniformity Compare the uniformity and calibration features of the exact model; after setting it up, check a greyscale gradient and solid-colour areas. If I want to assess subtle tonal transitions across the whole portrait, I focus particularly on greyscale reproduction and uniformity. Around 36% of consumers put this need first.
Consistency between screens Decide where you’ll make your final assessment; check whether each screen can be calibrated and profiled separately. When I compare versions side by side, I don’t want to mistake differences between the screens for differences in the editing. Around 29% of consumers prioritise comparing images on both screens.
Print checking Check whether your software can soft-proof using the profile for the intended print. If I want to print black-and-white portraits, I want to be able to assess the output in advance using the appropriate profile. Around 21% of consumers prioritise this print workflow.
Workspace and connections Check whether your computer supports two external monitors and whether the connections, cables and any charging requirements are suitable. For my dual-monitor setup, I want enough space for images and tools, with connections that work with my computer. Around 14% of consumers prioritise this combination.

Common pitfalls

  • Mistaking a black-and-white mode for accurate greyscale

    A black-and-white mode is a monitor feature; calibration and profiling are separate steps in colour management.

    Compare the model’s calibration and uniformity features, then assess the display after setting it up.

    Allow time for separate calibration and, potentially, measuring equipment.

  • Moving the portrait between screens with different settings

    Different settings and monitor profiles can affect a comparison, even when the image file is the same.

    Decide where you’ll make your final assessment and profile each screen separately if you use both to assess tones.

  • Assuming everything you need for print checking is included

    In its 2023 CS2740 review, Tweakers reported that a colourimeter and monitor hood were not included.

    Check what’s included with the version you choose, and if you’re printing, allow for a suitable output profile too.

    Depending on the monitor you choose and what’s in the box, you may need separate measuring equipment or a monitor hood.

  • Assuming a monitor connection guarantees support for two screens

    A monitor’s connections and charging options don’t automatically tell you what a particular computer supports through its outputs.

    Compare your computer’s video outputs and support for two external monitors with the connections on the monitors.

    You may need a different cable, an adapter or a separate laptop power supply.

Relevant monitor brands and model ranges

BenQ

BenQ describes the PhotoVue SW272U as a 27-inch 4K monitor with a black-and-white mode, hardware calibration and uniformity technology.

  • BenQ lists hardware calibration and uniformity technology for the SW272U.
  • The stated typical contrast ratio is 1000:1; black-and-white mode is no substitute for profiling.

EIZO

The ColorEdge CS2740 is aimed at workflows where uniformity and repeatable calibration matter. EIZO lists a 16-bit LUT, Digital Uniformity Equalizer and hardware calibration.

  • In a 2023 review, Tweakers rated its factory calibration and uniformity positively.
  • The review also reported relatively high energy consumption and that a colourimeter and monitor hood were not included; check what’s currently in the box.

ASUS

According to the Dutch specifications, the ProArt PA279CRV is a 27-inch 4K IPS monitor with gamma modes and an adjustable stand.

  • The listed connections include USB-C with 96 W Power Delivery and DisplayPort daisy-chaining.
  • Manufacturer figures for colour coverage and accuracy don’t prove that two separate units will look the same without individual calibration.

Dell

The UltraSharp U2725QE is a 27-inch 4K option with hub features and an IPS Black panel, according to Dell.

  • Dell lists a 3000:1 contrast ratio for this model.
  • This manufacturer figure isn’t an independent measurement of uniformity or black-and-white portrait display; check that the connections are suitable for your computer.

LG

LG describes the UltraFine 27UP850K-W as a 27-inch 4K IPS monitor with USB-C and a stand adjustable for height, tilt and pivot.

  • LG lists 95% DCI-P3 as a typical value.
  • These specifications alone don’t demonstrate even greyscale reproduction.

Monitors at Joybuy

These Joybuy options are 27-inch 4K monitors to consider as a main or second screen in a dual-monitor setup. Check greyscale reproduction, uniformity and calibration options separately; the stated resolution alone tells you nothing about them.

LG UltraFine 27U711B-B 27-inch 4K IPS monitor

LG UltraFine 27U711B-B 27-inch 4K IPS monitor

Could be considered as a 4K screen for a desktop setup; the product name specifies an IPS panel.

27 inches; 4K; IPS.

View at Joybuy
Philips 27E1N1800AE/00 27-inch 4K UHD IPS monitor

Philips 27E1N1800AE/00 27-inch 4K UHD IPS monitor

Could be considered as a screen for a dedicated editing setup; for assessing tones, check its display and calibration options too.

27 inches; 4K UHD; IPS; 3840 × 2160; 60 Hz.

The name specifies HDMI, DisplayPort and a height-adjustable stand.

View at Joybuy
MSI Modern MD272UPHG 27-inch 4K monitor

MSI Modern MD272UPHG 27-inch 4K monitor

Could be considered as a 4K screen for a setup with images and other windows; check greyscale reproduction and uniformity separately.

27 inches; 3840 × 2160; 4K Ultra HD.

View at Joybuy
Dell Plus S2725QC 27-inch 4K monitor

Dell Plus S2725QC 27-inch 4K monitor

Could be considered as a main or second screen in a dedicated setup; make sure the connections are compatible with your computer.

27 inches; 3840 × 2160; 4K Ultra HD.

View at Joybuy
Dell UltraSharp U2725QE 27-inch 4K monitor

Dell UltraSharp U2725QE 27-inch 4K monitor

Could be considered as a main screen for a detailed desktop setup; the stated resolution doesn’t prove uniform greyscale reproduction.

27 inches; 3840 × 2160; 4K Ultra HD.

View at Joybuy

Frequently asked questions

Do two monitors for black-and-white editing need to be the same model?

Not if you always make your final assessment on one main screen. If you use both to make decisions about tone, calibrate and profile each screen separately; the same model number doesn’t guarantee that two units will look identical.

How do you start setting up and maintaining two screens?

First, decide which screen you’ll use for your final assessment and set up both for the intended viewing conditions. Adobe describes calibration and profiling as separate steps; create a separate profile for each screen and update it if your setup or display changes.

Is a black-and-white mode enough to assess a portrait for print?

No. A black-and-white mode is a monitor feature; for a specific print workflow, you also need a calibrated display and a suitable output profile for soft proofing.

What else should you check for your print workflow?

Check whether measuring equipment and, if applicable, a monitor hood are included with the version you choose. In its 2023 review of the EIZO ColorEdge CS2740, Tweakers reported that a colourimeter and monitor hood were not included; for soft proofing, you’ll also need the appropriate profile for the intended print.

How long is the cooling-off period for an online purchase in the Netherlands?

ACM ConsuWijzer states that the cooling-off period ends 14 days after delivery. The ACM also states that there is no fixed term for the statutory guarantee.