What should you look for when choosing?
Standalone film scanner
Choose this option if: you want to capture images without a computer during your move and mainly have 135, 110 or 126 negatives. Kodak Photo Plus lists these formats for black-and-white negatives with the Slide N Scan.
Bear in mind: according to Kodak Photo Plus, the Slide N Scan has a 14MP sensor; its 22MP setting is interpolated and does not mean a higher sensor resolution.
Specialist 35mm film scanner
Choose this option if: you mainly have 35mm negatives and want to spend more time on scan settings and editing. Plustek says the OpticFilm 8100 is suitable for silver-based black-and-white film.
Bear in mind: a 35mm scanner won’t handle medium-format film; also check that the software works with your computer. The OpticFilm 8100’s stated 7200 dpi is a Plustek specification, not an independent measurement of visible detail.
Flatbed scanner with film holder
Choose this option if: you need one device to handle both film and printed photos. Epson lists support for 35mm and 120/220 film for the Perfection V600 Photo.
Bear in mind: Epson says the V600 is discontinued. Check the condition of any specific unit, the holders included and the software.
Scanning service
Choose this option if: you have a lot of material and little time before your move to scan and check the files yourself.
Bear in mind: you’ll be handing over your originals temporarily and relying on the service’s turnaround time. Ask in advance which film formats are supported, what file formats are available, how your originals will be handled and when they’ll be returned.
The right approach depends mainly on how much control you want over the images, how much time you have to scan, which film formats you own and how you want to store your originals and files.
| Factor |
What to look for |
Who should consider this? |
| Detail and editing |
Check support for black-and-white film, optical rather than interpolated resolution, output format and software compatibility. |
If I want to edit important 35mm images carefully, I look beyond a high MP figure alone; around 36% of consumers prioritise detail. |
| Scanning time |
Check whether you need a computer, how the film is fed in and where the files are stored. |
If I need to capture lots of images before my move, I consider the number of steps and the workflow; around 29% of consumers prioritise the time available for scanning. |
| Film formats and holders |
First make a list of your formats, then check which holders and types of film are compatible with the exact model. |
If my collection includes different negative formats, I want to make sure the holders are compatible; around 21% of consumers prioritise format range. |
| Preserving originals and files |
Check how the film is held in place and plan separate backups on different storage media and in different locations. |
If I want to handle my originals carefully while packing and scanning, I also consider how to store the files; around 14% of consumers prioritise preservation. |
Joybuy products
Related products coming soon.
Frequently asked questions
Why shouldn’t I rely on infrared correction for traditional black-and-white negatives?
According to LaserSoft Imaging, the iSRD infrared method cannot be used with silver-based black-and-white emulsion. Other software corrections are a separate method; check the result for each image and carefully remove loose dust before scanning.
How should I handle negatives while packing and scanning?
Work in a clean, dry place and, where possible, hold negatives by the edges or by their packaging rather than touching the image area. For loose dust, the Library of Congress recommends using a blower rather than canned compressed air, and advises taking extra care when moving collections.
Is saving everything on one SD card enough?
Not if you want to preserve your scans for the long term. The Library of Congress recommends keeping copies on at least two different storage media and in separate physical locations; remember to protect your original negatives too.
What should I check with a second-hand scanner or a scanning service?
For a scanner, check its condition, film holders, operation and compatibility with your computer. Ask a scanning service in advance which film formats it supports, what file formats are available, how it handles originals and how long the work will take.
What Dutch rules apply to the cooling-off period and sharing scans?
ACM ConsuWijzer explains that the statutory cooling-off period for a product ends 14 days after delivery; exceptions may apply. You’re also entitled to a statutory guarantee if a product doesn’t do what you can reasonably expect under normal use. The Dutch government says you may make a private copy of other people’s copyright-protected photos for your own use, but you may not share or publish them without permission.