Computer-connected black-and-white scanner
You want to adjust your black-and-white negatives and manage scans directly on your computer. Control over the output and your approach to dust removal are important to you.
If you transfer scans regularly, a computer-connected scanner is a good fit if you want to save and adjust scans directly on your computer. A standalone scanner with an SD card suits you if you want to scan without a computer and manage files on the card first. Also check the film format, holders and file format you need. Don’t assume that infrared dust correction will work with traditional silver-based black-and-white film: LaserSoft Imaging explains that this method isn’t suitable for it.
You want to adjust your black-and-white negatives and manage scans directly on your computer. Control over the output and your approach to dust removal are important to you.
You scan regularly and want to know whether files go straight to a computer or are saved to an SD card first, so the transfer process fits the way you work.
As well as 35mm film, you may have other negative formats. Check which formats and holders are supported by the scanner and the specific version on offer.
| What matters when buying | What should you look for? | Who is this important for? |
|---|---|---|
| Handling black-and-white negatives | Check that the scanner supports your film format and find out how it handles dust. Infrared correction isn’t a guaranteed solution for traditional silver-based black-and-white film. | If accurate processing of black-and-white film is your priority, you’ll want to know which correction methods work with your film. Around 31% of consumers put the handling of black-and-white negatives first. |
| Frequent file transfers | Check whether scans go straight to a computer or are saved to an SD card first. Also check the file format and which card you’ll need. | If you transfer scans regularly, you’ll want the storage route to suit your computer or card-based workflow. Around 31% of consumers give file transfer top priority. |
| Speed when scanning repeatedly | Find out whether the film is fed through manually or transported automatically. A stated scan time isn’t the same as the total time needed for preparation and file transfer. | For recurring batches of scans, remember to factor in the time needed to load and save them. Around 23% of consumers prioritise speed when scanning repeatedly. |
| Film formats and holders | Compare the formats in your archive with the specifications, and check which holders come with the version on offer. | If you have different negative formats, you’ll want the scanner and available holders to support them. Around 15% of consumers give format support top priority. |
Infrared correction isn’t necessarily suitable for traditional silver-based black-and-white film. LaserSoft Imaging explains that silver-based black-and-white emulsion reflects infrared light, making the iSRD method unsuitable.
Consider the dust-removal process for the type of film you actually scan, rather than focusing only on whether the scanner has an infrared function.
Allow extra time for careful cleaning and retouching.
The reflecta x66-Scan and KODAK SLIDE N SCAN are both listed with 22 MP interpolation alongside a 14MP sensor. These figures therefore describe different things.
Compare the sensor and output specifications separately, and don’t base your choice on the highest MP figure alone.
Manual loading, adjusting settings, cleaning and saving files all take time too. reflecta lists automatic film transport for the RPS 10S, but that alone doesn’t tell you how long your complete scanning and transfer process will take.
For your own use, factor in preparation, feeding, transfer and file management.
Epson Netherlands lists the Perfection V600 Photo as discontinued. If you’re buying a clearance or second-hand unit, its condition and completeness matter.
Before deciding, check which film holders are included, software compatibility and the details of the specific unit.
The OpticFilm 8200i SE offers a computer-connected option for 35mm film, with greyscale output.
The standalone x66-Scan and computer-connected RPS 10S cater for different 35mm scanning workflows.
The specified SLIDE N SCAN is a standalone option for black-and-white negatives in the listed formats, among others.
The Perfection V600 Photo is a flatbed scanner with film holders for several formats, but Epson Netherlands lists the model as discontinued.
Don’t assume that it does. LaserSoft Imaging explains that silver-based black-and-white emulsion reflects infrared light, which means the iSRD infrared method isn’t suitable. For your workflow, consider careful cleaning and suitable software-based or manual retouching.
That depends on the type of scanner. According to reflecta, the x66-Scan saves JPEG files to an SD card without a computer; the Plustek OpticFilm 8200i SE is specified with a USB computer interface and computer requirements.
First, compare your film formats with the specifications, then check which holders come with the version on offer. The models listed vary: the KODAK SLIDE N SCAN specifies 135, 110 and 126 formats, while other models listed also specify support for 35mm and certain medium formats or 120/220 film.
No. The scan time per frame doesn’t tell you how long your whole workflow will take. Also allow for preparation, any manual feeding, cleaning, file transfer and organisation. Automatic transport is only relevant for the film formats and strips supported by the scanner.