Who is this buying guide for?

Photographers who want a break from screens after editing

You want to capture black-and-white negatives using a standalone device and check the files later. The Consumers’ Association identifies time and image quality as factors to consider when digitising photos; reflecta and KODAK Photo Plus describe standalone scanners that save to an SD card.

Photographers who want to fine-tune their own scans

You’re happy to spend extra time at your computer adjusting settings and checking for dust, tonal range and output files. Plustek describes models for 35mm film; LaserSoft Imaging explains why infrared correction doesn’t work on traditional silver-based black-and-white film.

Anyone with a collection of different film formats

You may have formats other than 35mm, so you’ll need to match the scanner and its included holders to your collection. reflecta, KODAK Photo Plus and Epson Netherlands describe the range of formats supported across their product lines.

What should you look for in a film scanner?

Start with the film formats and holders you need. Then decide whether you want to scan without a computer, and whether the output files suit the way you plan to check and store them.

What to consider What should you check? Who is this important for?
Less time at a screen Check whether the scanner works independently, which file format it uses and whether an SD card is included. After a long editing session, I want to capture my film without having to sit back down at my computer to scan it. Around 33% of consumers say avoiding extra screen time is their top priority.
Control over dust and tones Find out what type of black-and-white film you have and what non-infrared correction the software offers. If I want to assess dust and tones myself, I need to know which corrections work with my film and software. Around 27% of consumers prioritise control over their black-and-white scans.
Film format support Compare the formats in your collection with the scanner’s stated format support and the holders included. I want to load different formats from my collection without relying on a holder that isn’t compatible with the model. Around 20% of consumers say format support is their main consideration.
Handling a batch of negatives Check whether the feed mechanism works with your film strips, and remember to set aside time to check and store the scans. When scanning a batch of compatible negatives, I want to spend as little time as possible loading them individually. Around 20% of consumers prioritise reducing the manual work involved in processing multiple images.

Things to consider when choosing

  • Choosing infrared correction for traditional black-and-white film

    Infrared detection can’t remove dust from traditional silver-based black-and-white emulsion. LaserSoft Imaging explains why the silver-based emulsion prevents this method from working.

    Check the type of emulsion and see what non-infrared correction is available before choosing a scanner for this feature.

    Suitable software or manual correction may take extra time.

  • Mistaking interpolated megapixels for sensor resolution

    For the reflecta x66-Scan, reflecta lists a 14 MP sensor and an interpolated output of 22 MP. The output figure therefore doesn’t represent the sensor resolution.

    Compare the sensor and output specifications separately, and check which files suit your workflow.

  • Assuming a standalone scanner is a complete computer-free archive solution

    A scanner that captures images independently won’t automatically take care of checking and storing your files afterwards. KODAK Photo Plus says the Slide N Scan models discussed require an SD card, which must be purchased separately.

    Check what storage you need and open a few test files before scanning your entire collection.

    You may need to buy a separate SD card and set aside time to check and store your files.

  • Taking an old product page as proof that a scanner is currently on sale

    Epson Netherlands lists the Perfection V600 Photo as discontinued. The product information alone doesn’t confirm that a new one is available to buy.

    If you find one for sale, check its condition, the holders, software support and terms of sale.

    If any parts are missing, you may need to source compatible holders or software.

Brands to consider

Plustek

Computer-connected scanners for 35mm negatives, including black-and-white film.

  • Plustek says the OpticFilm 8100 supports silver-based black-and-white film and offers an optical resolution of 7200 dpi.
  • According to Plustek, the OpticFilm 8200i SE has an infrared channel. LaserSoft Imaging says infrared correction doesn’t work on traditional silver-based black-and-white film.

reflecta

The x66-Scan is a standalone scanner for several film formats; the RPS 10S is a computer-connected model with automatic feeding for 35mm film.

  • reflecta lists holders for 35mm and 120 film and JPEG storage on an SD card for the x66-Scan. For the RPS 10S, reflecta specifies automatic feeding for 3 to 40 images.
  • The x66-Scan’s 22 MP output is interpolated from a 14 MP sensor. The RPS 10S uses infrared-based MagicTouch, but that isn’t a reason to choose it for dust correction on traditional silver-based black-and-white film.

KODAK Photo Plus

Slide N Scan models with a screen for standalone scans of formats including 135, 110 and 126 film.

  • European product information distinguishes between a 5-inch model rated at 14 MP and a 7-inch model with a 13 MP sensor and 22 MP output for certain film.
  • The models discussed require an SD card, which must be purchased separately. Check the specifications for the exact version so you don’t confuse screen and output details.

Epson

The Perfection V600 Photo is a flatbed scanner with a transparency unit for prints and several film formats.

  • Epson Netherlands lists holders for 35mm and 120/220 film.
  • Epson Netherlands lists the V600 Photo as discontinued. If you find one for sale, check its condition, the holders included and software support.

Rollei

The PDF-S 240 SE is a standalone multi-format scanner for 24 × 36 mm negatives, paper photographs and more.

  • Rollei says you can scan without a computer and lists a memory card slot.
  • Rollei specifies 1800 dpi, with an interpolated mode of up to 2400 dpi. The manufacturer’s specifications aren’t an independent assessment of black-and-white scan quality.

Film scanners at Joybuy

Related products will be available soon.

Frequently asked questions

Does infrared correction work on my black-and-white negatives?

Not on traditional silver-based black-and-white film. According to LaserSoft Imaging, the silver-based emulsion prevents this infrared method from working. Check your film type and the non-infrared software correction available.

What do I need to get started without a computer?

Check that you have the right film holder and find out what storage the scanner uses. KODAK Photo Plus says the Slide N Scan models discussed require an SD card, which isn’t included; reflecta lists SD storage for the x66-Scan.

What can I do if a film scanner breaks too soon during normal use?

In the Netherlands, ACM ConsuWijzer says the seller must offer an appropriate solution if a product doesn’t perform as you could reasonably expect during normal use. This could mean a repair, replacement or refund; there isn’t one fixed warranty period that automatically applies to every scanner.

Can I scan other people’s photos and share the scans?

The Dutch government says you can make a private copy for your own use, but you can’t distribute or publish the photos without the creator’s permission. Owning a negative doesn’t in itself give you permission to publish a scan.

Where can I take an unwanted scanner?

According to the Dutch government, when buying a new appliance, individuals can return an old, similar electrical device to the retailer. There are also collection points and options through local councils. The take-back scheme doesn’t apply to business equipment.