Who is this guide for?

Bass editor in a quiet room

You mainly edit existing bass guitar recordings and want to assess the bass and how it sits with the rest of the mix. RTINGS describes open-back models as an option for mixing and mastering when isolation isn’t essential.

Editor at a shared desk

You want to be less distracted by surrounding noise while editing and avoid disturbing others with sound leakage. RTINGS discusses closed-back headphones as an option when isolation matters.

Editor who also records

You sometimes record bass guitar or other sources and want to stop headphone sound from reaching a microphone. RTINGS distinguishes between closed-back models for recording and open-back models for mixing.

What should you look for?

Closed-back, wired

A good fit if: you work in a shared or noisy space, or monitor beside a microphone while recording.

Trade-off: closed-back earcups limit sound leakage and ambient noise, but they can’t guarantee bass reproduction that sounds the same to everyone.

Open-back, wired

A good fit if: you mainly mix in a quiet room and don’t need to record with a microphone or block out noise.

Trade-off: open-back models leak sound and provide little isolation from ambient noise, making them less suitable for recording or working at a shared desk.

What to consider What to check before buying Who should pay most attention?
Assessing bass and the mix Check the fit, and compare important mix decisions on a second, familiar playback system too. I want to assess the bass and its balance with the other tracks in a quiet room; around 33% of consumers say checking the mix is their main reason for buying.
Isolation at your desk Consider how much ambient noise there is and whether the earcups fit securely. If noise around me distracts me while editing, I prioritise isolation; around 25% of consumers say isolation is their main reason for buying.
Sound leakage while recording Check whether you’ll be monitoring beside a microphone; open-back models leak sound. When recording with a microphone, I want to limit headphone sound in the recording; around 17% of consumers put this first.
Fit and connection Check the plug, any adapter you may need and the cable length; for the DT 770 PRO, also check the impedance version. I want to edit comfortably for longer and connect my headphones to my listening output; around 25% of consumers give fit and connection top priority. beyerdynamic offers the DT 770 PRO in 32, 80 and 250 ohm versions; Audio-Technica lists a 3.0 m straight cable and a 1.2–3.0 m coiled cable for the ATH-M40x.

Buying pitfalls

  • Judging bass by the stated frequency range alone

    A frequency range on its own doesn’t tell you how accurately the bass will sound with your fit or during your mix work.

    Treat the range as a model specification, check the fit and compare important low-end decisions on a second, familiar playback system.

  • Choosing an open-back model without considering your workspace

    Open-back models leak sound and offer little isolation. This can be impractical when recording with a microphone or working at a shared desk.

    First decide whether you’ll mainly be mixing in a quiet space, recording as well, or blocking out ambient noise.

  • Checking the impedance and cable only after buying

    beyerdynamic lists the DT 770 PRO in several impedance versions. An unsuitable plug or impractical cable length may mean you need a different version or an additional connection.

    Before buying, make a note of your listening output, plug, cable length and full model version.

Brands to compare

beyerdynamic

The closed-back DT 770 PRO is worth comparing if isolation or monitoring while recording matters to you.

  • beyerdynamic lists 32, 80 and 250 ohm as separate versions, designed for different source devices.
  • Choosing an impedance version alone won’t determine how the headphones perform with your particular output.

Audio-Technica

The closed-back ATH-M40x is worth comparing for editing and occasional recording at a desk.

  • Audio-Technica lists swivelling earcups and two detachable cables: a 1.2–3.0 m coiled cable and a 3.0 m straight cable.
  • Check that the fit and connection suit your head and equipment; manufacturer claims about accuracy and isolation aren’t a guarantee for every user.

AKG

The closed-back K371 is an option if you’re looking for a foldable model with replaceable ear pads.

  • AKG lists three detachable cables and replaceable ear pads for the K371.
  • The stated frequency range of 5 Hz–40 kHz is a model specification, not proof that the bass will sound accurate on your head.

Sennheiser

The open-back HD 490 PRO is worth comparing for mixing in a quiet room; the closed-back HD 480 PRO offers a different option for recording.

  • Sennheiser lists two types of ear pads and a detachable cable for the HD 490 PRO, and a closed-back design for the HD 480 PRO.
  • Open-back and closed-back models handle sound leakage and isolation differently. Sennheiser’s statements about accuracy and low-end control are manufacturer claims.

Joybuy products

This Joybuy selection features closed-back headphones for wired listening in a home office; check bass-mix decisions on a second, familiar playback system too.

Bose QuietComfort Ultra Bluetooth Headphones, black

Bose QuietComfort Ultra Bluetooth Headphones, black

May suit you if you want to listen wired while editing and limit ambient noise; check important bass decisions on a second, familiar playback system too.

The product description lists a closed-back, over-ear design and active noise cancellation.

An audio cable is listed for listening without battery power. The connections described are 2.5 mm and 3.5 mm.

View at Joybuy

Frequently asked questions

Can I use open-back headphones if I also record?

An open-back model may suit mixing on its own in a quiet space. If you monitor beside a microphone, closed-back headphones are generally more suitable because open-back models leak sound; keep an eye on the playback volume too.

How do I connect studio headphones to my home setup?

Before buying, check which headphone output you use, which plug or adapter you need, and whether the cable will reach your desk. beyerdynamic offers the DT 770 PRO in 32, 80 and 250 ohm versions for different sources.

What should I look for in terms of fit and care during long editing sessions?

Check that the headphones fit comfortably and keep an eye on the condition of the ear pads. AKG lists replaceable pads for the K371; Sennheiser lists washable and replaceable pads for the HD 490 PRO. Follow the care instructions for your exact model.

Should I listen louder to hear bass detail?

No, don’t automatically turn up the volume to pick out details. The 2019 WHO-ITU publication gives a reference of 80 dB for 40 hours per week for adults using personal audio devices in Mode 1; this is a guideline, not a guarantee for every listening situation.

What are my rights when buying online in the Netherlands?

For many distance purchases from a business, the Dutch government says you have a 14-day cooling-off period; exceptions and the terms of the specific purchase matter. If you have questions about delivery or returns, check who the seller is and who is responsible.