Who is this guide for?

Workshop participant with weak basement coverage

You want to join from a fixed spot and need to check whether the additional Wi-Fi point can get a usable connection to the router.

Resident with a basement that blocks the signal

The signal through the floor is weak, and you want to weigh up whether you can run a network cable or whether powerline through existing sockets is worth trying.

Household with several Wi-Fi dead zones

You want to cover other rooms as well as your workshop area, so you’ll need to consider the connection between multiple Wi-Fi points.

What should you look for?

First, work out how the connection between your router and the basement will be made: an additional Wi-Fi point won’t help if it can’t receive a usable signal itself.

Access point via network cable

Choose this option if: you can run a cable to the basement and want to provide Wi-Fi there.

Bear in mind: you’ll need to plan the cable route and have a suitable connection.

Wireless repeater

Choose this option if: the router’s signal is still usable somewhere such as near the basement stairs.

Bear in mind: the repeater still depends on the wireless signal at its own location.

Powerline with Wi-Fi

Choose this option if: running a cable isn’t practical and the wireless connection between floors is too weak.

Bear in mind: the connection can vary depending on the socket and electrical installation.

Mesh with multiple nodes

Choose this option if: you need coverage in other rooms or on other floors as well as in the basement.

Bear in mind: check that the nodes can connect well to each other and work with your existing router.

What to consider What to look for when buying Who needs to pay particular attention?
Reliable connection Test the connection both where you’ll hold your workshop and where you plan to put the repeater; check whether an access point with Ethernet is an option. If I want to speak and listen from the basement during the workshop, the connection needs to be usable along the whole route. Around 36% of consumers give a reliable connection top priority.
Wi-Fi without a network cable Check whether the kit includes an adapter for the router and a Wi-Fi adapter for the basement; test the sockets you plan to use. If running a cable to the basement isn’t practical, I want to know whether the existing electrical wiring can provide a usable route. Around 29% of consumers prioritise basement Wi-Fi without a network cable.
Multiple rooms and compatibility Make a note of your router model and check specifically which mesh features work with it; decide whether you need one node or several. If I want to cover other rooms too, I’ll check the connection between the nodes and whether they work with my router. Around 21% of consumers prioritise extending coverage to multiple rooms.
Installation and use Compare the number of devices and cables required; check how it needs to be installed and update the firmware before relying on the connection. If I want to start with as little equipment as possible, I need a solution that suits my setup and how I’ll use it. Around 14% of consumers prioritise a straightforward purchase and installation.

Common buying mistakes

  • Buying a repeater because there’s almost no Wi-Fi in the basement

    A wireless repeater depends on its connection to the router. If there’s no usable signal where it’s placed, it can’t restore the missing signal.

    First, assess an intermediate location, such as near the basement stairs. If the wireless route isn’t usable there, compare running a network cable with using powerline.

  • Mistaking a single powerline adapter for a starter kit

    Powerline needs adapters at both ends: one by the router and one in the basement.

    Check what’s included in the box and test the sockets you plan to use. Ideally, plug the adapters directly into a wall socket; that’s devolo’s recommendation.

    If you don’t already have a suitable powerline network, you’ll also need an adapter by the router.

  • Assuming all repeaters have the same mesh features

    According to TP-Link, the TP-Link RE605X requires a compatible OneMesh router for OneMesh features; standard Wi-Fi extension is different.

    Check the exact router model and the operating mode you need before choosing a device.

  • Assuming a theoretical Wi-Fi speed guarantees a good workshop experience

    The connection through the basement floor or via the electrical wiring, along with your internet connection, will also affect performance. Manufacturer figures aren’t a measurement of the signal in your basement.

    Test audio and video in the planned location using the workshop service you’ll actually use.

Brands to consider

TP-Link

Worth considering for a standalone repeater or access point, and for mesh nodes when you need to cover several rooms.

  • According to TP-Link, the RE605X has Wi-Fi 6, a gigabit port and a placement indicator. TP-Link says the Deco X50 has three gigabit ports per node and supports optional Ethernet backhaul.
  • OneMesh on the RE605X requires a compatible OneMesh router. These product features don’t guarantee a usable connection through the floor of a particular basement.

devolo

Powerline with Wi-Fi is an option to test when running a cable isn’t practical and the wireless connection between floors is too weak.

  • According to devolo, the Magic 2 WiFi 6 next Starter Kit contains two adapters; the Wi-Fi adapter has two gigabit ports.
  • devolo warns that some sockets can result in low transfer speeds and that electrical appliances may cause interference.

FRITZ!

The FRITZ!Repeater 1200 AX can be used as a repeater or, with a network cable, as a LAN bridge.

  • FRITZ! documents using a LAN bridge with a router from another manufacturer.
  • That doesn’t prove that pairing it with another router will offer the same mesh features as a FRITZ! home network.

KPN

The SuperWifi nodes are worth considering for households with a compatible KPN internet connection.

  • KPN says that a working KPN internet connection with a connected modem is required for installation.
  • The stated coverage from basement to loft isn’t a measurement of your home; check where to place the nodes and whether cabling is needed.

Joybuy products for basement Wi-Fi

This selection includes powerline with Wi-Fi, wired access points, mesh systems with multiple nodes and a wireless repeater. Choose according to the signal route to the basement and the rooms you want to cover.

TP-LINK TL-WPA7517 KIT powerline adapter starter kit

TP-LINK TL-WPA7517 KIT powerline adapter starter kit

Suitable for a basement where running a cable isn’t practical and you want to test the connection over existing electrical wiring.

This is a powerline adapter starter kit; the connection can vary depending on the socket and electrical installation.

Joybuy
TP-Link Omada EAP653 wireless access point, PoE

TP-Link Omada EAP653 access point, 2976 Mbit/s, PoE

An access point to consider if you can run a network cable to the basement and want to provide Wi-Fi there.

The product name specifies 2976 Mbit/s and Power over Ethernet (PoE).

Joybuy
TP-Link Deco XE75 Pro mesh system, 3-pack, tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro 3-pack, tri-band Wi-Fi 6E

Suitable for a household that wants to cover other rooms as well as the basement using multiple mesh nodes.

The product name specifies a 3-pack, tri-band (2.4 GHz/5 GHz/6 GHz) and Wi-Fi 6E (802.11ax). A mesh kit won’t automatically fix a weak connection to the basement.

Joybuy
TP-Link TL-WA801N access point and Wi-Fi extender

TP-Link TL-WA801N access point and Wi-Fi extender

An option to consider if you can run a network cable to the basement and want to use an access point.

The product name specifies up to 300 Mbps, two antennas, WPS and passive PoE. It also mentions a Wi-Fi extender function.

Joybuy
Wi-Fi Repeater Pro Black

Wi-Fi Repeater Pro Black

Could be suitable if there’s a spot between the router and the workshop area where the Wi-Fi signal is usable.

The wireless connection still depends on the signal at the repeater’s location; it can’t restore a router signal that doesn’t reach the basement.

Joybuy

Frequently asked questions

Does the repeater need to be in the basement?

No, not if it can barely receive a signal from the router there. Try an intermediate location with usable reception, then check the connection where you’ll be holding your workshop. If the wireless route doesn’t work, compare a wired access point with powerline.

What internet speed do I need for my workshop?

This depends on several factors, including the meeting service and whether you’ll be streaming video yourself. Zoom publishes separate bandwidth recommendations for meetings and webinars; these aren’t universal requirements for every workshop or Wi-Fi device. Test in advance using the service you’ll actually use, from the spot in the basement.

Can I plug a powerline adapter into an extension lead?

devolo recommends plugging a powerline adapter directly into a wall socket wherever possible. Test the sockets you plan to use; electrical appliances may affect transmission.

What if a device I bought online turns out to be unsuitable or breaks?

According to the Dutch government, many online consumer purchases come with a statutory 14-day cooling-off period. You’re also entitled to a product that works as it should; in the Netherlands, there is no set general statutory warranty period. Check the terms and conditions that apply to your purchase, and contact the seller about any fault.

Do I need a permit for ordinary home Wi-Fi in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, home Wi-Fi usually doesn’t require a permit if you comply with the conditions of use. This applies to Wi-Fi, not to a booster for a mobile phone network, which is subject to different rules.