Who should consider these options?

Portfolio creator with weak Wi-Fi in the basement

You upload files from a room where walls or a floor can weaken the Wi-Fi signal. Ziggo lists concrete as a possible cause of Wi-Fi interference.

Portfolio creator who can run a cable

You can run an Ethernet cable to your workspace and want to weigh up whether to connect your computer directly or provide Wi-Fi there too. The Consumers’ Association recommends a wired connection for a speed test.

Portfolio creator with no cable route

You can’t run an Ethernet cable to the basement and want to see whether a wireless access point or powerline could work in your home.

What should you look for in a Wi-Fi solution?

First, compare a wired upload test by the modem with a test at your basement workspace. This helps you tell the difference between a slow broadband upload and a weak connection within your home.

Factor What to look for when buying Who is this important for?
Basement coverage Test the connection at your workspace and check whether you can run an Ethernet cable there. If I upload from the basement, I want to know whether the connection there is usable. Around 36% of consumers prioritise basement coverage.
Actual upload speed Compare the upload speed by the modem using a cable with the speed at your basement workspace. I want to know whether my broadband package or the basement connection is limiting my upload before I replace any equipment. Around 29% of consumers prioritise identifying the bottleneck.
Installation without an Ethernet cable Test the signal where you plan to put a wireless access point, or try the sockets you intend to use for powerline. Without a cable route, I’m looking for a solution that uses Wi-Fi or my home’s electrical wiring. Around 21% of consumers prioritise installation without running a new network cable.
Total cost and support Check how many access points or adapters you need, and look into firmware updates and support. I want to check in advance what extra components and support my setup will require. Total cost and support are the most important factors for around 14% of consumers.

Common buying mistakes

  • Confusing fast Wi-Fi with a faster broadband upload

    Your broadband connection and your home Wi-Fi are different parts of the overall connection. Extra Wi-Fi equipment won’t fix a limitation in the upload speed coming into your modem.

    First, test the upload speed on a computer connected to the modem with a network cable, then compare it with the speed at your basement workspace.

  • Placing a wireless mesh access point where the Wi-Fi barely reaches

    The additional access point still needs to maintain a connection to the network. A concrete floor can weaken the wireless connection.

    Test the signal where you plan to position the access point. Also check whether you can connect the access points with a cable.

  • Assuming the advertised powerline speed is guaranteed

    The actual connection over your home’s electrical wiring depends on the wiring itself. The advertised maximum doesn’t tell you what your basement connection will be like.

    Test the upload using the sockets you actually plan to use before deciding whether this solution is right for you.

Brands to compare

TP-Link

The Deco X50 is worth considering if you want mesh with the option of an Ethernet connection between access points. The Deco PX50 uses powerline to connect the access points.

  • TP-Link says the Deco X50 has three gigabit ports per unit and can connect the units to each other via Ethernet.
  • The advertised powerline throughput of the PX50 doesn’t tell you what the connection will be like in a particular basement. Test the setup you plan to use.

FRITZ!

The FRITZ!Repeater 1200 AX can work as an additional access point via LAN. Its integration with an existing FRITZ!Box is an important factor to consider.

  • FRITZ! says the repeater joins the mesh network when used with a compatible FRITZ!Box running FRITZ!OS 7 or later.
  • This specific mesh integration hasn’t been demonstrated with routers from other brands.

devolo

The Magic 2 WiFi 6 next Starter Kit combines powerline with a Wi-Fi access point for a room where running a network cable is difficult.

  • devolo lists two adapters and two gigabit LAN ports on the Wi-Fi unit.
  • The advertised Wi-Fi and powerline performance won’t predict the connection over your home’s electrical wiring.

ASUS

AiMesh and ZenWiFi are worth considering if you want to connect several access points by cable and configure the network mode.

  • ASUS describes Ethernet backhaul and an access point mode setup with a compatible switch.
  • Check these features and the ports on the exact kit you’re considering. A manual can’t predict how a particular model will perform in your basement.

Joybuy products for your basement connection

The products below cover powerline, wireless Wi-Fi extension, mesh and wired access points. The right option depends on the connection by your modem and in the basement, and on whether you can run a cable.

TP-LINK TL-WPA7517 KIT powerline adapter starter kit

TP-LINK TL-WPA7517 KIT powerline adapter starter kit

Worth considering if you can’t run an Ethernet cable to the basement and want to test the connection over your home’s electrical wiring.

The product description lists a Type E plug and status lights for PLC, Wi-Fi and LAN. The actual powerline connection depends on the wiring, so test the sockets you plan to use.

View at Joybuy
ASUS RT-AX52 AX1800 AiMesh router

ASUS RT-AX52 AX1800 AiMesh router

A good fit if you’re looking for a router that, according to the product description, can be expanded with compatible routers using AiMesh. Check it’s compatible with your existing equipment.

The product information lists Wi-Fi 6, dual-band 2.4 GHz and 5 GHz, and gigabit Ethernet.

View at Joybuy
WiFi Repeater Pro Black

WiFi Repeater Pro Black

Worth considering if you want to extend an existing wireless network to an area with weaker coverage.

The product information lists 2.4 GHz Wi-Fi and two external antennas. According to the description, setup starts with a socket next to the router. Then test the signal where you want to use the repeater.

View at Joybuy
TP-Link TL-WA801N wireless access point

TP-Link TL-WA801N wireless access point

A good fit for a setup where you can run an Ethernet cable to the basement and want to provide Wi-Fi there.

The product information lists 2.4 GHz, speeds of up to 300 Mbps, two antennas, WPS and passive PoE. Check which connections and power supply are right for your setup.

View at Joybuy
TP-Link Deco XE75 mesh Wi-Fi system

TP-Link Deco XE75 mesh Wi-Fi system

Worth considering if you want to extend Wi-Fi coverage with a mesh setup. Check how far from the main unit an additional access point can still receive a network connection.

The product information lists tri-band Wi-Fi on 2.4, 5 and 6 GHz, Wi-Fi 6E and three gigabit Ethernet ports per unit.

View at Joybuy

Frequently asked questions

Should you buy a faster router if your portfolio files are slow to upload?

Not until you’ve measured where the bottleneck is. First, test the upload speed using a wired connection to the modem, then compare it with the connection in the basement. If the wired upload by the modem is already slow, extra Wi-Fi coverage won’t solve the problem.

Can you connect an access point in the basement to your existing broadband provider’s modem?

This could be an option if you can run a network cable to the basement. Choose equipment with a suitable access point or LAN bridge function, and follow the connection instructions for the exact model.

How can you test whether powerline works in your basement?

Use the sockets you actually plan to use and compare the upload speed there with a wired test by the modem. Powerline uses your home’s electrical wiring, and an advertised maximum connection speed doesn’t guarantee the actual throughput.

Do you need a licence for home Wi-Fi, and what should you check about the CE mark?

According to the Dutch Authority for Digital Infrastructure, home Wi-Fi doesn’t require a licence if you use the designated frequencies and comply with the conditions of use. Equipment sold in the Netherlands must have the correct CE marking; check the marking on the specific device.

What ongoing costs and support should you check?

Check whether you’ll need additional access points, adapters or installation work, and find out how firmware updates are provided. Wi-Fi equipment that’s left on continuously uses energy; the cost depends on your setup and energy tariff.