Who is this relevant for?

Designer with slow uploads from the basement

You send design files from the basement and want to find out whether the limitation lies with your broadband connection or with the Wi-Fi signal inside your home.

Working behind a concrete floor

Your workspace has weak Wi-Fi coverage, and you’re considering whether you can run a network cable to a Wi-Fi access point.

Working without a cable route

You can’t run an Ethernet cable and want to know whether a repeater placed where reception is good, or a powerline kit you’ve tested, could work for you.

What should you look for when buying?

Start by measuring upload speed over a wired connection at the modem, then compare it with the result at your workspace. The ACM ConsuWijzer recommends measuring over a wired connection close to the connection point to assess your internet speed.

Wireless repeater

A good fit if: there’s still a spot between the router and the basement with good Wi-Fi reception, and you don’t want to run a cable.

Bear in mind: the repeater needs to receive a usable connection itself; test the upload speed at your final workspace.

Wired access point or mesh point

A good fit if: you can run an Ethernet cable to or near the basement, for example if a floor is obstructing the wireless connection.

Bear in mind: running the cable and configuring the access point or mesh system correctly take extra work; mesh features may depend on your router.

Powerline with Wi-Fi

A good fit if: running a cable isn’t practical and you can test the connection through your mains sockets.

Bear in mind: the connection depends on your electrical wiring; the speed quoted on the box doesn’t predict the upload speed at your workspace.

Concern What should you check? Which consumers does this matter to most?
Finding the cause of the upload limitation Compare a wired upload speed test at the modem with the upload speed in the basement and the speed included in your broadband package. If I first want to find out whether my broadband connection is the limitation, I’ll test at the modem and at my workspace; around 36% of consumers put this diagnosis first.
Coverage through floors and walls Check whether there’s a spot with good existing Wi-Fi coverage; if not, look into an Ethernet cable route and the access point mode on your chosen model. If my workspace is behind a difficult floor, I need a usable connection to the basement, either wirelessly or by cable; around 29% of consumers prioritise this coverage issue.
Unable to run an Ethernet cable Check that a powerline kit includes the adapters you need and that the exact series is compatible with your existing kit; test the connection at the sockets you plan to use. If I don’t have a route for a cable, I want to know whether a solution using the mains will work where I need it; around 21% of consumers prioritise a solution that doesn’t require an Ethernet cable to be installed.
Compatibility and maintenance Check your router model, the mesh support required, available updates and power consumption. The Dutch Authority for Digital Infrastructure describes the applicable European requirements and CE marking for wireless equipment. If I first want to check that the Wi-Fi access point works with my router and is easy to maintain, I’ll also check the exact model; around 14% of consumers put installation and maintenance concerns first.

Common buying mistakes

  • Placing a repeater where the Wi-Fi already drops out

    A wireless access point needs to receive a usable connection itself. If you place it right in the dead zone, it won’t be able to restore that connection.

    First, try a spot where the signal towards the basement is still good, then check the upload speed at your workspace. If there’s no such spot, look into a wired access point.

  • Assuming the speed on the box is your guaranteed upload speed

    The stated powerline speed isn’t the same as the data transfer rate you can actually achieve. A fast connection between devices won’t make a slow broadband connection any faster either.

    Compare the wired speed test at the modem with the result in the basement, and test powerline at the sockets you plan to use.

  • Buying a single adapter for a new powerline network

    You need adapters at both ends of a powerline connection. A standalone expansion adapter isn’t the same as a starter kit for a new network.

    Check what’s included and whether the exact adapter series is compatible with your existing equipment.

  • Assuming mesh systems work together

    OneMesh, FRITZ! Mesh and AiMesh each have their own compatibility requirements; a mesh name alone doesn’t confirm that the system will work with your router.

    Check the exact router model and distinguish between standard repeater operation and brand-specific mesh features.

Relevant brands to consider

TP-Link

According to TP-Link, the RE605X combines Wi-Fi 6, a gigabit port, a signal indicator and an access point mode.

  • Access point mode could be useful if you can run an Ethernet cable to the Wi-Fi access point.
  • TP-Link says OneMesh works with a compatible OneMesh router; the stated Wi-Fi speed doesn’t tell you what upload speed you’ll get in the basement.

FRITZ!

According to the manufacturer, the FRITZ!Repeater 1200 AX has a gigabit LAN connection and can extend an existing network.

  • The manufacturer describes a wired LAN Mesh connection when used with a FRITZ!Box.
  • The LAN Mesh functionality described is linked to a FRITZ!Box; check which features are available with your router.

devolo

According to devolo, the Magic 2 WiFi next Starter Kit is a powerline kit with Wi-Fi that connects your network through the mains.

  • According to devolo, the starter kit includes two adapters and the Wi-Fi access point has two gigabit ports.
  • devolo states that Magic and dLAN adapters aren’t compatible with each other; you’ll need to test the connection in your home.

ASUS

According to ASUS, the RP-AX58 can be used as a repeater or in access point mode.

  • Access point mode gives you the option of a wired connection to the Wi-Fi access point.
  • AiMesh is designed to work with a compatible ASUS router; the manufacturer links the benefits of Wi-Fi 6 to compatible devices.

NETGEAR

According to NETGEAR, the EAX15 is a Wi-Fi 6 extender with a gigabit Ethernet port.

  • The Ethernet port is a useful feature to consider if you’re looking at a wired connection.
  • The stated maximum wireless speed doesn’t tell you what connection your basement workspace will receive.

Joybuy products for basement Wi-Fi

These products include powerline adapters that use your mains sockets, a wireless repeater and wired access points. The right option depends on your modem speed test, the coverage between your router and the basement, and whether you can run a cable.

TP-LINK TL-WPA7517 KIT powerline adapter starter kit

TP-LINK TL-WPA7517 KIT powerline adapter starter kit

This powerline starter kit could suit you if you can’t run an Ethernet cable to the basement; test whether your sockets provide a usable connection.

The product description lists indicator lights for PLC, Wi-Fi, LAN and power.

View at Joybuy
Wi-Fi Repeater Pro Black

Wi-Fi Repeater Pro Black

This repeater could suit you if there’s still a spot between the router and the basement with usable Wi-Fi coverage; check the upload speed at your workspace.

The product description lists a 2.4 GHz signal, two external antennas and a signal indicator. The described setup starts at the router, after which you move the device to its chosen spot.

View at Joybuy
TP-Link Omada EAP653 wireless access point

TP-Link Omada EAP653

This access point could suit you if you can run an Ethernet cable to the basement; the description mentions ceiling or wall mounting.

The product description lists dual-band Wi-Fi, PoE, web management and firmware updates. PoE power is part of the installation.

View at Joybuy
TP-Link Omada EAP673 extender, white

TP-Link Omada EAP673-Extender

This network repeater could suit you if you want to extend your existing network; the description recommends placing it within range of that network.

The product description lists Wi-Fi 6, dual-band Wi-Fi and an Ethernet port.

View at Joybuy
TP-Link EAP725-Wall with Power over Ethernet

TP-Link EAP725-Wall

This access point could suit you if you can run a wired network connection to the basement; check that the mounting location and power supply work with your setup.

The product description lists dual-band Wi-Fi, PoE and three Ethernet ports, with wall or ceiling mounting.

View at Joybuy

Frequently asked questions

How can you test whether a Wi-Fi extender helps with uploads?

First, test over a wired connection close to the connection point, then test again at your basement workspace. If the upload speed is already too low at the modem, compare the result with your broadband package and contact your provider if there’s a discrepancy; a high Wi-Fi speed printed on the box doesn’t tell you what upload speed you’ll get there.

Where should you place a wireless repeater for a basement?

Place the repeater somewhere the existing Wi-Fi signal is still good, for example near the top of the stairs, then test the upload speed in the basement. Don’t simply put it where the Wi-Fi already drops out: you’ll need to check the best location in your own home.

When is powerline a useful alternative to a network cable?

Powerline is an alternative worth testing if you can’t run an Ethernet cable and there’s no suitable spot for a wireless repeater. You’ll need adapters at both ends, and the connection depends on your electrical wiring, so test the upload speed at the sockets you plan to use.

Can you use Wi-Fi equipment in the Netherlands without a licence?

According to the Dutch Authority for Digital Infrastructure, you can use Wi-Fi at home without a licence as long as you follow the rules for the designated frequencies and their use. This applies to Wi-Fi, not to repeaters for mobile networks. Wireless equipment must also meet the applicable European requirements and carry the required CE marking; check this for the exact model.

What aftercare and consumer rights should you know about?

Install available updates and use a strong password; the Dutch government recommends both for using smart devices safely. According to ACM ConsuWijzer, online consumer purchases usually come with a statutory 14-day cooling-off period after delivery, subject to certain exceptions. Statutory guarantees in the Netherlands depend on what you could reasonably expect from the product and aren’t automatically limited to two years.