Which solution is right for you?

Basement viewer with a weak Wi-Fi signal

You want to get a signal to one viewing spot and can place a repeater somewhere the router’s signal still reaches. This is in line with advice from TP-Link and the Consumentenbond on where to position a repeater.

Basement viewer with the option to run a cable

You can run Ethernet to the basement and want to avoid relying on a wireless connection through the floor. TP-Link describes an Ethernet connection as an alternative when a stable wireless connection isn’t possible.

Basement viewer without a suitable spot for a wireless connection

Running a cable is tricky, and you want to test whether internet over your electrical wiring works at your viewing spot. Devolo describes powerline as transmitting data over the electricity network.

What should you look for when choosing?

Wireless repeater

Choose this option: if there’s a socket before the basement where the router’s signal is still strong.

Bear in mind: the repeater needs a usable signal from the router itself, so test the connection at your viewing spot afterwards.

Access point via Ethernet

Choose this option: if you can run a network cable to the basement, especially if Wi-Fi through the floor is unreliable.

Bear in mind: you’ll need to be able to run the cable and choose a device with access point mode.

Powerline

Choose this option: if running a cable isn’t practical and there’s no suitable spot for a wireless repeater.

Bear in mind: you’ll need adapters at both ends, and you should test the connection in your own home.

What to consider What should you check? Which consumers is this for?
Signal at the intermediate spot Find a socket before the dead zone and check whether the repeater receives the router’s signal there. Then test it at your viewing spot. If I want to get a signal to one spot in the basement, the repeater needs to receive the router’s signal well along the way. Around 36% of consumers prioritise having a suitable spot for a wireless connection.
Connection route and streaming quality Test the connection on your viewing device. Netflix recommends a stable connection of at least 3 Mbps for 720p, 5 Mbps for 1080p and 15 Mbps for 4K. These are Netflix recommendations, not universal requirements for streaming services. If Wi-Fi doesn’t reliably reach through the floor, I want to know whether Ethernet or powerline works at my viewing spot. Around 29% of consumers are mainly looking for a different way to connect.
Router and mesh compatibility Check your router model and the requirements for the mesh features you want. TP-Link’s RE705X requires a OneMesh router for OneMesh; FRITZ!’s central mesh features depend on a compatible FRITZ! setup. If I want to keep my existing router and preferred mesh setup, the repeater needs to be compatible with them. Around 21% of consumers put compatibility first.
Unnecessary equipment and running costs First, compare a speed test over Ethernet with one in the basement and see whether moving the router helps. The Consumentenbond notes that network equipment is always on and therefore uses electricity. I want to find out whether the router’s position or the internet connection is the problem before buying a device that won’t solve it. Around 14% of consumers focus mainly on purchase and running costs.

Common purchasing mistakes

  • Putting the repeater in the dead zone

    A repeater needs a usable connection to the router itself. A spot deep in the basement may not have one.

    First, try an intermediate spot where the router’s signal still reaches. For obstacles that prevent a stable wireless connection, TP-Link recommends using a suitable access point mode with an Ethernet cable.

  • Confusing the stated Wi-Fi speed with the speed at your viewing spot

    A product specification doesn’t tell you what speed your TV or other viewing device will get through walls and floors.

    Test the connection on the device you watch on and compare the result with your streaming service’s recommendation and your preferred picture quality.

  • Confusing standard repeater use with brand-specific mesh

    The RE705X uses OneMesh with a OneMesh router. The central mesh features of the FRITZ!Repeater 1200 AX are designed for a compatible FRITZ! setup.

    Check your exact router model and decide whether you need mesh features or simply want to extend your Wi-Fi signal.

  • Buying a standalone repeater when you mean powerline

    A standard repeater receives Wi-Fi from the router; powerline uses your electrical wiring to carry the connection. A standalone repeater isn’t automatically a powerline kit.

    Check which adapters you need for a powerline connection and test it at your viewing spot in your own home.

Brands to consider

TP-Link

The RE705X is worth considering if you want to try a wireless repeater or can run Ethernet to the basement.

  • TP-Link lists a gigabit Ethernet port and access point mode for this model.
  • OneMesh requires a OneMesh router. The stated wireless speed isn’t a measure of streaming speed in your basement.

FRITZ!

The FRITZ!Repeater 1200 AX is most relevant if you already use a compatible FRITZ!Box.

  • FRITZ! lists a gigabit LAN port and compatibility with other routers.
  • The central FRITZ! mesh features depend on a compatible FRITZ! setup. Using it with another router doesn’t automatically make those features available.

devolo

According to devolo, the WiFi 6 Repeater 3000 has a gigabit LAN port and access point mode. The brand also offers dedicated powerline products.

  • According to devolo, the repeater can also be used as an access point.
  • A standalone repeater isn’t a powerline starter kit. For powerline, choose compatible adapters and test the connection at home.

Joybuy products for Wi-Fi in the basement

These products cover wireless repeaters, access points connected via Ethernet and a powerline option. For radio equipment placed on the EU market, the Dutch Authority for Digital Infrastructure (RDI) states that CE marking is required. Check the marking on the exact version.

TP-LINK TL-WPA7517 KIT powerline adapter starter kit

TP-LINK TL-WPA7517 KIT Powerline Adapter Starter Kit

This starter kit is a good fit if you want to test powerline when there’s no suitable spot for a wireless connection. Performance depends on your home’s electrical wiring.

View at Joybuy
WiFi Repeater Pro Black

Wifi Repeater Pro Black

This repeater is designed to extend an existing wireless network. Place it somewhere the router’s signal is still usable, then check the connection in the basement.

View at Joybuy
TP-Link Omada EAP653 access point

TP-Link Omada EAP653 Wireless Access Point, 2976 Mbit/s, PoE

This access point is suited to a wired connection to the basement. The product name lists 2976 Mbit/s and Power over Ethernet (PoE); check which connection and power supply your setup requires.

View at Joybuy
TP-Link Omada EAP673-Extender network repeater

TP-Link Omada EAP673-Extender Network Repeater, 10, 100, 1000 Mbit/s

This network repeater is suited to extending a connection from somewhere the router’s signal is still usable. Test it at your viewing spot to check whether the connection is stable enough for your preferred picture quality.

View at Joybuy
TP-Link TL-WA801N access point and Wi-Fi extender

TP-Link TL-WA801N Wireless Access Point/WiFi Network Extender

This model is described as an access point and Wi-Fi extender, so you can decide whether it suits your preferred connection route. The product name lists N up to 300 Mbps, two antennas, WPS and Passive PoE; check which mode suits your connection.

View at Joybuy

Frequently asked questions

Where should I place a wireless repeater for the basement?

Don’t automatically put it in the basement. Find an intermediate spot where it still receives a strong signal from the router, then test it at your viewing spot. For suitable models, TP-Link recommends access point mode with Ethernet when obstacles prevent a stable wireless connection.

How can I check whether a documentary will play at my preferred quality?

Test the connection on the device you use to watch in the basement. Netflix recommends a stable connection of at least 3 Mbps for HD 720p, 5 Mbps for FHD 1080p and 15 Mbps for UHD 4K. Also check that the title, device and subscription support that picture quality.

Should I get a repeater or a more expensive internet plan straight away?

Not before you’ve checked what’s causing the problem. Compare a speed test over Ethernet with the connection at your viewing spot, and see whether moving the router helps. If your wired speed remains low, contact your provider.

Do I need a licence for a standard Wi-Fi repeater in the Netherlands?

No notification or registration is needed for the licence-exempt Wi-Fi frequency use described by the RDI. Radio equipment placed on the EU market must meet European requirements, and the manufacturer must apply the CE marking to confirm conformity. Check the exact version.

What should I check about updates and warranty?

For the version you choose, check how updates are provided and what support and warranty apply to that model. FRITZ! lists regular updates and a five-year manufacturer’s warranty for the FRITZ!Repeater 1200 AX; this information doesn’t automatically apply to other models or brands.