Which solution is right for you?

If the Wi-Fi signal is weak in the basement

You want to cover one basement room and can place a repeater at an intermediate point where the router’s Wi-Fi signal is still usable. The location of this intermediate point is key to choosing the right solution.

If you can run an Ethernet cable

You can connect a Wi-Fi access point via Ethernet and want to avoid a wireless connection between the router and the basement. Check that the device supports access point or LAN bridge mode.

If there’s no cable or usable Wi-Fi signal at an intermediate point

If there’s barely any Wi-Fi reception in the basement and running a cable isn’t practical, you could consider a powerline Wi-Fi kit. Test the connection using the sockets you actually plan to use.

What should you look for when choosing?

What to consider What should you check? Who is this most relevant for?
Wi-Fi at the intermediate point Test whether the repeater can still receive a usable connection from the router at the spot where you plan to place it. If I can’t run a cable, I want to know whether the Wi-Fi signal is still usable on the way to the basement. Around 42% of consumers put coverage first.
Wired connection Check whether you can run an Ethernet cable from the router to your chosen Wi-Fi point, and whether the device supports access point or LAN bridge mode. If I can run a cable, I want to connect the Wi-Fi point in or near the basement by wire. Around 33% of consumers prioritise this wired option.
Powerline using your chosen sockets Check that the pack contains a suitable kit and test the connection using the sockets by the router and in the basement. If there’s no cable or usable Wi-Fi signal at an intermediate point, I want to know whether powerline will work with my sockets. Around 25% of consumers put powerline first.

Common purchasing mistakes

  • Putting the repeater straight in the basement

    A wireless repeater relies on the Wi-Fi connection it receives from the router. If you put it somewhere with barely any reception, it won’t solve the problem.

    First, try an intermediate spot where the router’s signal is still available. If that doesn’t work, compare a wired access point with powerline.

  • Confusing link rates with download speeds

    Combined Wi-Fi or powerline rates aren’t the same as measured download speeds in your basement. Your internet connection and any obstacles will affect performance, as will the electrical environment when using powerline.

    First, check the connection at the router. Then check the download speed where you want to access your magazines.

  • Buying a standalone powerline extender without an existing network

    An expansion adapter isn’t the same as a complete starter kit. Check what’s in the pack and whether the adapter is compatible with the powerline range you already use.

    To set up a new network, you’ll need a compatible connection by the router and an adapter at the spot where you want to use it.

  • Assuming a CE statement on a product page is full confirmation

    The correct marking and documentation must apply to the model that’s actually supplied. A statement on a retailer’s website doesn’t confirm this by itself.

    Check the model and hardware version supplied, the CE marking on the device and the accompanying documentation. The Dutch Authority for Digital Infrastructure explains that stricter European safety requirements have applied to relevant wireless equipment since 1 August 2025.

Brands to compare

TP-Link

The RE705X is worth considering if you want to compare wireless extension with a wired access point.

  • TP-Link lists Wi-Fi 6, a Gigabit Ethernet port and access point mode for the RE705X.
  • OneMesh requires a compatible mesh set-up. Also check which hardware version you’ll receive and what documentation comes with it.

FRITZ!

The FRITZ!Repeater 1200 AX is worth considering as a repeater or LAN bridge, particularly if you already have a FRITZ! network.

  • FRITZ! lists a Gigabit LAN port and describes connecting via LAN to a router from another brand.
  • Integration with FRITZ! Mesh doesn’t mean that the same mesh features are available with every router.

devolo

The Magic powerline kits are an option if there’s no usable intermediate point for a wireless signal and running a cable isn’t practical.

  • According to devolo, the Magic 2 WiFi 6 next Starter Kit contains two adapters, with Wi-Fi on the second adapter.
  • Performance can vary depending on the sockets you choose and sources of electrical interference. The Magic range isn’t compatible with the older dLAN range.

NETGEAR

NETGEAR explains the difference between wireless repeating and an access point with an Ethernet connection for compatible extenders.

  • The EAX15 manual explains how to use the device in access point mode.
  • That information alone doesn’t tell you about the range or suitability of a specific model in your basement.

Joybuy products for a basement room

This selection includes powerline Wi-Fi, wireless repeaters and wired access points. Before buying, check that the model and hardware version supplied have the correct CE marking and accompanying documentation.

TP-LINK TL-WPA7517 KIT powerline adapter starter kit

TP-LINK TL-WPA7517 KIT Powerline Adapter Starter Kit

Suitable when there’s no usable intermediate point for a Wi-Fi signal or practical route for a cable. Test the connection using the sockets you plan to use.

Joybuy
Wi-Fi Repeater Pro Black

Wifi Repeater Pro Black

Suitable for extending Wi-Fi wirelessly if the repeater can still receive a usable signal from the router at an intermediate point. Don’t automatically place it in the basement room.

Joybuy
TP-Link Omada EAP653 wireless access point

TP-Link Omada EAP653 Wireless Access Point (WAP)

Suitable for a wired connection to a Wi-Fi point. Check whether you can run an Ethernet cable from the router to your chosen spot.

The product name lists Power over Ethernet (PoE).

Joybuy
Ubiquiti U7 Pro, 5800 Mbit/s, white, with Power over Ethernet (PoE)

Ubiquiti U7 Pro 5800 Mbit/s White with Power over Ethernet (PoE)

Suitable for a wired connection to a Wi-Fi point. You’ll need an Ethernet connection to the router to use it as an access point.

The product name lists 5800 Mbit/s and Power over Ethernet (PoE); these figures aren’t measured download speeds in a basement room.

Joybuy
TP-Link Omada EAP673-Extender network repeater, white, 10, 100 and 1000 Mbit/s

TP-Link Omada EAP673-Extender Network Repeater, White, 10, 100, 1000 Mbit/s

Suitable for extending Wi-Fi wirelessly if the device can still receive a usable signal from the router at an intermediate point. Placing it deep in the basement where there’s no incoming signal won’t solve the problem.

Joybuy

Frequently asked questions

How can you tell whether a Wi-Fi booster will solve the right problem?

First, check the internet connection at the router, preferably using a computer connected by Ethernet, and compare it with the connection in the basement. If the connection is weak mainly in the basement, look into the placement or a wired Wi-Fi point. An extra repeater won’t automatically fix a slow connection at the router.

Where should you place a wireless repeater?

Place the repeater between the router and the basement, somewhere it can still connect well to the router. If available, use the placement indicator or set-up guide, then check the connection in the basement.

What should you look for in a powerline Wi-Fi kit?

Check that you have a suitable kit with one connection by the router and a Wi-Fi point where you want to use it, then test both sockets you plan to use. Devolo recommends plugging its adapters directly into wall sockets and notes that sources of electrical interference can affect performance.

Where should you check the CE marking and documentation?

Check the marking on the device actually supplied and make sure the documentation matches the correct model and hardware version. The Dutch Authority for Digital Infrastructure explains that manufacturers apply the CE marking when radio equipment meets all applicable requirements. Stricter European safety requirements have also applied to relevant wireless equipment since 1 August 2025.