Who are these solutions for?

Learners with a thick basement ceiling above them

Above all, they want to avoid interruptions to streamed lessons when the existing Wi-Fi signal struggles to reach the basement. A cable or a local Wi-Fi access point could be an option.

Learners without a route for a cable

They need to weigh up whether a wireless mesh point in a spot with a good enough signal, or a powerline connection that has been tested in their home, is the right fit.

Learners with an existing provider network

They want to improve basement coverage without replacing the main router unnecessarily, and need to check which extension works with their current modem.

What should you consider when choosing Wi-Fi for the basement?

Wired Wi-Fi access point

Choose this if: you can run an Ethernet cable to the basement.

Trade-off: running a cable takes work, but the connection between access points won’t have to pass wirelessly through the floor.

Wireless mesh point

Choose this if: there’s no route for a cable, but there’s still usable Wi-Fi in a suitable spot between the router and basement.

Trade-off: performance depends on where you place the extra point and the signal it receives.

Powerline with Wi-Fi

Choose this if: running a network cable isn’t practical and your existing sockets carry the connection reliably.

Trade-off: performance can vary depending on which sockets you use and sources of electrical interference, as devolo notes.

Replace or move the main router

Choose this if: your tests suggest the router itself is the limiting factor, or that another permitted location would give the basement good enough coverage.

Trade-off: a newer Wi-Fi standard or a higher advertised speed doesn’t, by itself, prove the signal will reach through the basement ceiling.

Concern What to look for when buying Who is this important to?
Reliable coverage in the basement Test Wi-Fi in the teaching area and check whether you can run a cable to a local Wi-Fi access point. If I’m taking lessons behind a thick floor, I mainly want the connection to reach the basement. Around 36% of consumers put basement coverage first.
Lessons without video or audio dropouts Compare the wired internet connection with Wi-Fi in the basement, and test it during a lesson. If you don’t want the picture or sound to cut out while streaming, focus on the connection where you take lessons. Around 29% of consumers prioritise uninterrupted lessons above all else.
Compatibility with your existing modem Check your provider, modem, router or access point mode, and the connections on the exact model. If I want to keep my current modem, I want to know in advance whether an extension will work with it. Around 21% of consumers prioritise keeping their existing setup.
Points and adapters you’ll need Check how many devices and connections your chosen setup requires, and whether any cabling is needed. If you don’t want to buy unnecessary equipment, first work out what your own setup actually needs. Around 14% of consumers rank this above their other buying priorities.

Pitfalls to avoid when buying

  • Buying a faster main router without checking what’s causing the problem

    If the provider’s connection is the issue, or the floor is weakening the signal, a new router won’t automatically solve the problem.

    First, test the connection using a network cable at the router, then compare it with Wi-Fi where you take lessons.

  • Placing a wireless mesh point in a dead zone

    An extra point needs a usable connection to the rest of the network. A spot with no incoming signal won’t automatically solve the problem.

    Test a spot between the router and basement. If there’s no usable connection there, look into running a cable.

  • Assuming the maximum powerline speed is what you’ll get in the basement

    Actual transfer speeds can differ from the advertised maximum, depending on which sockets you use and sources of electrical interference.

    Test the adapters in the sockets you plan to use, and check the connection during a lesson.

  • Assuming different model variants or provider-specific systems are interchangeable

    The Deco X50-PoE has different connections from the standard Deco X50. KPN lists a compatible KPN modem and a KPN internet connection as requirements for SuperWifi 2.

    Before ordering, check the full model name, pack size, connections and any provider requirements.

Brands and systems to consider

TP-Link

The Deco X50 is a Wi-Fi 6 mesh system with optional Ethernet backhaul, for setups with one or more Wi-Fi points.

  • TP-Link Netherlands lists three Gigabit ports on the Deco X50. TP-Link also describes how to connect Deco units using Ethernet.
  • The advertised coverage doesn’t predict how the signal will perform in a particular basement. Check the pack size and hardware version.

FRITZ!

The FRITZ!Repeater 1200 AX is designed to extend an existing router’s coverage, not to replace an internet modem.

  • FRITZ! lists one Gigabit LAN port and describes a wired LAN bridge setup.
  • Automatic integration with FRITZ! Mesh, as described, is subject to the stated FRITZ!Box requirements. Don’t assume the same applies to other routers.

ASUS

According to ASUS Netherlands, the ZenWiFi BD4 is a dual-band Wi-Fi 7 mesh system with wired backhaul.

  • ASUS lists two 2.5 Gigabit ports, provided your other network equipment supports them.
  • For a streamed lesson, Wi-Fi 7 isn’t automatically more useful than a good connection to the basement. This isn’t an independent performance test of the BD4.

devolo

Magic 2 WiFi next combines Wi-Fi in the room where you need it with a connection over your home’s electrical wiring.

  • devolo lists two Gigabit LAN ports on the Wi-Fi adapter.
  • Magic adapters don’t work with the older dLAN range. Socket choice and sources of electrical interference can affect performance.

KPN

SuperWifi 2 is a provider-specific extension for a compatible KPN internet connection and KPN modem.

  • KPN lists an existing KPN modem as a requirement for use.
  • It isn’t a general replacement for every modem or internet provider. An advertised coverage figure isn’t a measurement of performance in your home.

Joybuy products for replacing your router or extending Wi-Fi

This selection includes routers for situations where the main router itself is the limiting factor, as well as a powerline kit and a Deco X50 mesh system for extending Wi-Fi. First check where the connection is falling short, then verify the connections and CE marking on the version actually supplied.

TP-Link TL-WR802N V4 router

TP-Link TL-WR802N V4 router

Only suitable if tests suggest the main router itself is the limiting factor; this model won’t, on its own, solve a weak signal behind a basement ceiling.

The product description lists Wi-Fi 4 on 2.4 GHz, a maximum wireless speed of 300 Mbit/s and a network port of up to 100 Mbps.

View at Joybuy
TP-LINK TL-WPA7517 KIT powerline adapter starter kit

TP-LINK TL-WPA7517 KIT powerline starter kit

An option if running a network cable to the basement isn’t practical and the connection works well through your home’s sockets.

The product information lists Wi-Fi over existing electrical wiring, a maximum transfer speed of 1,000 Mbit/s and a Type E plug. Actual transfer speeds can vary depending on your electrical wiring and sources of interference.

View at Joybuy
ASUS RT-AX52 AX1800 dual-band wireless router

ASUS RT-AX52 AX1800 dual-band router

This router is worth considering if the main router itself is the limiting factor; a new router doesn’t guarantee that Wi-Fi will reach through the basement ceiling.

The product information lists Wi-Fi 6, dual-band (2.4 GHz / 5 GHz), three Gigabit Ethernet ports and compatibility with AiMesh routers.

View at Joybuy
TP-Link Deco X50 mesh, 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50 Wi-Fi 6 mesh, 3-pack

A good fit for a multi-point setup if you can get a usable connection to the basement; the optional Ethernet backhaul lets you connect Deco units by cable.

According to the product information, this pack contains three nodes with dual-band Wi-Fi 6 (2.4 GHz / 5 GHz) and three Gigabit ports per unit. The advertised coverage isn’t a measurement of performance in a particular basement.

View at Joybuy
ASUS RT-AX52 Pro AX3000 dual-band wireless router

ASUS RT-AX52 Pro AX3000 dual-band router

Consider this model only if tests show that replacing the main router is a good fit for the problem; the model specifications alone can’t predict coverage in the basement.

The product information lists Wi-Fi 6, dual-band (2.4 GHz / 5 GHz), MU-MIMO, OFDMA and compatibility with AiMesh routers.

View at Joybuy

Frequently asked questions

How can you tell whether the problem is with your internet connection or the Wi-Fi in the basement?

First, test the internet connection using a computer connected to the router by a network cable, then compare it with the connection where you take lessons. A Wi-Fi access point won’t fix an internet connection that’s falling short.

Where should you place an extra wireless Wi-Fi point?

Place the point somewhere it can still receive a usable connection, then check the Wi-Fi in the basement. If running a cable is an option, you can connect a suitable point locally by cable.

Can you connect every mesh point to your modem in the same way?

No. TP-Link describes different cabling rules for Deco in router mode and access point mode. Follow the instructions for your chosen system and existing network setup.

What are your rights if an online purchase doesn’t suit you or develops a fault?

For consumer purchases made online, you generally have a statutory 14-day cooling-off period from delivery, with some exceptions. If a product is faulty, you’re also entitled to a product that meets what you could reasonably expect from normal use. ACM ConsuWijzer stresses that there isn’t one fixed two-year period that applies to this right.

Do you need a licence for Wi-Fi at home in the Netherlands, and what should you check on the device?

According to the Dutch Authority for Digital Infrastructure (Rijksinspectie Digitale Infrastructuur), a licence isn’t required for home Wi-Fi if you use the designated frequencies and comply with the conditions of use. The RDI also says that radio equipment must carry the required CE marking. Check this on the version actually supplied and follow the instructions for use.