Who should consider these options?

Film fan with weak basement Wi-Fi

Your film keeps buffering in the basement, but the connection works better nearer the router. You want to know whether changing its position, running a cable or adding another Wi-Fi point will help. The Consumers' Association identifies walls and ceilings as potential obstacles to the signal.

Film fan who can run a cable

You can run a network cable to the basement and want a wired connection for your TV or Wi-Fi for several devices. TP-Link describes Ethernet backhaul as a way to connect mesh nodes by cable.

Film fan with an existing broadband provider modem

You want to keep your current router and choose an add-on that suits your network setup. Check which features will remain available if you use a system connected to your provider's modem.

What should you look for in basement Wi-Fi?

First, work out whether the problem is with your internet connection, wireless coverage or connection to your existing network. Each cause calls for a different solution.

What matters What to look for when buying Who should consider this?
Coverage through the floor Test the Wi-Fi where you watch films and at possible locations for an extra node. A wireless mesh node also needs a usable connection to the main network. If I mainly watch films in the basement, I want to know whether the signal reaches that spot before buying extra equipment; around 36% of consumers prioritise basement coverage.
Reliable film playback First, test the connection using a cable at the router, then test it on your playback device. Netflix recommends a stable connection of at least 5 Mbps for FHD and 15 Mbps for 4K for its own service. I want to know whether buffering is caused by the internet or Wi-Fi before replacing anything; around 29% of consumers prioritise a stable stream.
Connection to your broadband provider's network Check whether the system supports access point mode and which features remain available in that mode. TP-Link says some Deco router features are unavailable in this mode. If you want to keep your provider's router, look for an add-on that fits your existing setup; around 21% of consumers prioritise this connection.
Installation and equipment needed Before comparing packages, work out what cables, power sockets, number of units and any extra network equipment you will need. If I would rather limit the amount of cabling or extra equipment, I want to know what my chosen setup involves in advance; around 14% of consumers focus mainly on installation and equipment.

Common pitfalls

  • Assuming a high Wi-Fi speed guarantees smooth films in the basement

    Testing the connection by cable at the router and then where you watch films helps you tell the difference between a slow internet connection and weak local Wi-Fi.

    Test both connections before replacing your router or buying an add-on.

  • Putting a wireless mesh node somewhere with a poor connection

    The extra node also needs to exchange data with the main network. Placing it beside the TV won't automatically solve a weak connection through the floor.

    Try a spot where the existing network still works well; if the connection there is inadequate, consider running a cable.

  • Comparing packages or access point mode without checking the differences

    A 2-pack and a 3-pack don't contain the same number of units. With Deco, some router features may also be unavailable in access point mode, according to TP-Link.

    Check the pack size, ports and features you need for the exact model.

    Depending on the setup you choose, you may also need an extra unit, a cable or a different network configuration.

Brands to compare

TP-Link

The Deco X50 range is worth considering if you want several Wi-Fi points and may be able to use Ethernet backhaul.

  • TP-Link lists Wi-Fi 6, three gigabit ports and a wired connection option for the Deco X50.
  • The stated coverage doesn't guarantee reception through a basement floor. According to TP-Link, some router features aren't available in access point mode.

FRITZ!

The FRITZ!Mesh Set 1700 is an option for extending an existing network with several points, rather than simply looking for a replacement router.

  • The manufacturer describes the 3-pack as three FRITZ!Repeaters 1700 that can work with an existing router or modem.
  • Check the connection and placement requirements for the model you choose; the manufacturer doesn't guarantee coverage in a specific basement.

ASUS

ZenWiFi BD4 is worth considering if a wired connection between mesh nodes and Ethernet ports are important to you.

  • ASUS lists Ethernet backhaul and two 2.5G ports per unit for the BD4.
  • Check the pack size and regional model; these specifications alone don't tell you how well a film stream will work in a basement.

Google

Nest Wifi Pro is a mesh option to compare if you want to connect the points to each other by cable.

  • Google confirms that Nest Wifi Pro supports Ethernet backhaul.
  • Google says that standard Nest Wifi points don't have Ethernet ports, and Nest Wifi Pro doesn't form a mesh with older Nest Wifi or Google Wifi products.

Joybuy products for basement Wi-Fi

This selection includes mesh systems for extending Wi-Fi coverage and an access point for a wired network connection. Check that the connections and installation for each model suit your setup.

TP-Link Deco BE68 mesh system, 2-pack

TP-Link Deco BE68 (2-pack)

An option if you want to use two mesh nodes and are considering a wired or wireless connection between them.

Set of 2 mesh nodes.

View at Joybuy
TP-Link Deco X50-PoE mesh system, 2-pack, dual-band Wi-Fi 6

TP-Link Deco X50-PoE (2-pack)

Suited to a mesh setup where Ethernet installation and PoE are relevant.

Dual-band (2.4 GHz/5 GHz); Wi-Fi 6 (802.11ax); 2-pack.

View at Joybuy
TP-Link Deco XE75 Pro mesh system, 3-pack, tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro (3-pack)

An option if you want to place several mesh nodes; test whether the connection between them works well at your chosen locations.

Tri-band (2.4 GHz/5 GHz/6 GHz); Wi-Fi 6E (802.11ax); 3-pack.

View at Joybuy
TP-Link Deco X50 mesh system, 2-pack, dual-band Wi-Fi 6

TP-Link Deco X50 (2-pack)

Suited to anyone who wants to use two mesh nodes and make use of the option to connect them by cable.

Dual-band (2.4 GHz/5 GHz); Wi-Fi 6 (802.11ax); 2-pack. TP-Link lists three gigabit ports per unit and optional Ethernet backhaul for the Deco X50.

View at Joybuy
Ubiquiti UniFi AP U7 Long-Range access point

Ubiquiti UniFi AP U7 Long-Range

A wired access point to consider if you can run a network cable to the basement.

Requires a compatible PoE+ power supply and management through UniFi Network.

View at Joybuy

Frequently asked questions

Should you buy a new router straight away if films keep buffering in the basement?

No. First, test the internet connection using a cable at the router, then check the Wi-Fi where you watch films. If the wired connection is already slow, a different Wi-Fi router won't automatically fix the underlying problem.

Where should you put a wireless mesh node?

Don't automatically put it beside the TV: the node still needs a usable connection to the rest of your network. Test possible locations, and consider running a cable to the basement if the wireless connection remains weak through the floor.

Can mesh work with your existing broadband provider's modem?

It depends on the system and settings. TP-Link describes an access point mode for Deco in which the existing router continues to assign IP addresses; according to TP-Link, some Deco router features aren't available in this mode.

What internet speed does your film stream need?

It varies by streaming service and picture quality. Netflix recommends a stable connection of at least 5 Mbps for FHD and 15 Mbps for 4K for its own streams; don't treat these figures as a universal router requirement.

What should you check to make sure a Wi-Fi device meets the relevant requirements?

Check the marking and exact model before you buy. The Dutch Authority for Digital Infrastructure states that radio equipment meeting all applicable requirements carries a CE marking; this general requirement doesn't automatically confirm that every model complies.