Student with weak Wi-Fi in the basement
You download study materials in a basement room and want to find out whether the main issue is poor local Wi-Fi coverage. The Consumers’ Association recommends checking the connection where you’ll be using it.
First, measure the connection in the basement and compare it with a measurement near the router. The Consumers’ Association also recommends checking your internet connection using a network cable if possible. A wireless repeater is only a sensible option if you can place it somewhere with a usable signal from the router. If that isn’t possible, a network cable with an access point could be the answer. Powerline with Wi-Fi is another option to test using the sockets you plan to use around your home.
You download study materials in a basement room and want to find out whether the main issue is poor local Wi-Fi coverage. The Consumers’ Association recommends checking the connection where you’ll be using it.
You can run an Ethernet cable to the basement and connect a Wi-Fi access point there, so the connection doesn’t have to pass wirelessly through the floor. TP-Link and FRITZ! describe devices that can work as an access point or LAN bridge.
You can’t run a network cable and want to find out whether the electrical wiring can connect to a Wi-Fi access point in the basement. devolo describes powerline as a connection that uses your home’s electrical wiring.
Choose this option when: there’s a spot between the router and the basement with a usable signal from the router.
Bear in mind: the repeater still depends on the signal at the spot where you place it.
Choose this option when: you can run a cable to the basement and want to connect a Wi-Fi access point there.
Bear in mind: you’ll need to be able to run the cable, and your chosen device must have a suitable access point mode.
Choose this option when: running a network cable isn’t practical and you want to try using your electrical wiring for the connection.
Bear in mind: you’ll need to test the connection using the sockets in your home. Also check compatibility with any existing adapters.
| What to consider | What should you check? | Who should give this more weight? |
|---|---|---|
| Usable signal | Test reception at possible repeater locations before the basement. Having a socket in the basement doesn’t automatically mean the repeater will get a good connection there. | If I want to use a repeater, there needs to be a usable signal from the router where I place it; the basement itself isn’t automatically the right spot. Around 36% of consumers say having a usable signal at the repeater location is their top priority when buying. |
| Wired connection | Check whether you can run a cable to the basement and whether the device has a LAN or access point mode. | If I can run a cable downstairs, I want to connect a Wi-Fi access point there without the connection first having to pass wirelessly through the floor. This is the top priority for around 29% of consumers. |
| Powerline via sockets | Test the kit using the sockets you plan to use and check whether your existing adapters work with the chosen product range. | Without a cable route, I want to know whether the electrical wiring between the chosen sockets can carry the connection to the basement. For around 21% of consumers, powerline without a new network cable is the main priority. |
| Using the connection at the same time | Check that your router and connected devices are suitable for the set-up you’ve chosen. A quoted Wi-Fi speed doesn’t tell you what download speed you’ll get in the basement. | If I’m downloading study materials while other people at home are online, I look at the network set-up as a whole, not just a speed figure. Around 14% of consumers say simultaneous use is their top priority. |
The repeater depends on the signal at the chosen location to connect to the router. Obstacles can make the wireless connection even more difficult.
Check reception at possible locations before the basement, then test again after installation where you download your study materials.
A Wi-Fi specification isn’t a measurement of the internet connection where you use it. Adding a Wi-Fi access point alone won’t fix a slow broadband connection.
Measure the internet connection and Wi-Fi in the basement separately, and compare the results under the same conditions. The Consumers’ Association recommends checking your internet speed using a wired computer too, if possible.
Compatibility can depend on the product range and router you choose. TP-Link pairs OneMesh on the RE605X with a OneMesh router; devolo states that Magic 2 WiFi next doesn’t work with the older dLAN range.
Before buying, make a note of the full model names of your router and any existing adapters, and check the requirements for the feature you want to use.
The RE605X is an example of a Wi-Fi 6 repeater that, according to TP-Link, can also work as a wired access point.
Magic powerline kits with Wi-Fi are one option if the Wi-Fi signal is weak through the floor and running a network cable would be difficult.
According to the manufacturer, the FRITZ!Repeater 1200 AX has a LAN bridge option, including when used with a router from another manufacturer.
According to ASUS, the RP-AX58 can be used as a repeater or access point. AiMesh is relevant if you have a compatible ASUS router.
These products offer different ways to get Wi-Fi in a basement room: powerline, a wireless repeater, and wired access points or mesh units. For each model, check that its connections, router and any power supply are suitable for your set-up.
Image unavailable
Suitable for a set-up where running a network cable isn’t practical and the connection needs to travel through your existing electrical wiring to a Wi-Fi access point.
Powerline over electrical wiring with Wi-Fi functionality; the product description lists PLC, LAN, power and Wi-Fi indicators.
Image unavailable
May be suitable if there’s a spot between the router and the basement with a usable wireless signal. Check reception there before installing the repeater.
The product description lists 2.4 GHz, external antennas, an indicator light and set-up via the Mi app.
Image unavailable
May be suitable if you can run an Ethernet cable to the basement and connect a Wi-Fi access point there. Check which mode is right for your set-up.
The product description lists 2.4 GHz, Ethernet, PoE, two external antennas, and access point, range extender and client modes.
Image unavailable
May be suitable if you’re considering a Wi-Fi set-up with multiple units. Check whether Ethernet backhaul is possible in your home if you want to connect the units by cable.
The product description lists Wi-Fi 6, dual-band at 2.4 GHz and 5 GHz, and three Gigabit Ethernet ports per unit. Ethernet backhaul is listed as an option.
Image unavailable
May be suitable if Ethernet is available in the basement and you can meet the power and management requirements.
The product description lists dual-band Wi-Fi, a 2.5 Gigabit Ethernet uplink and PoE+ power (802.3at). Compatible PoE+ equipment and management via the UniFi Network platform are required.
No. A Wi-Fi extender won’t fix a slow broadband connection. The Consumers’ Association recommends measuring your internet speed first, using a computer connected by network cable if possible. If your connection is slow, contact your provider if necessary.
Not without checking reception there first. The Consumers’ Association recommends placing a Wi-Fi access point where there are as few obstacles as possible. Then test the connection in the basement, where you use your study materials.
Powerline is worth trying if running a network cable isn’t practical and there’s no suitable spot for a repeater with a usable signal from the router. The connection then runs through your electrical wiring, but test the kit using the sockets in your home and check that any existing adapters are compatible.
That depends on the device and router. TP-Link states that using OneMesh with the RE605X requires a OneMesh router. Check the full model names and the mesh features required before choosing.
According to the Dutch Radiocommunications Agency, radio equipment placed on the market in Europe must meet the applicable requirements and have a CE marking. Check the marking and product details for the specific model; the product name alone doesn’t show that it meets the requirements.