Archive manager with a cable route
You can run an Ethernet cable to the basement and want Wi-Fi there from a wired access point. TP-Link describes access point mode for use with an Ethernet connection.
First, decide how the extra Wi-Fi access point will connect to the router. An Ethernet cable can prevent a wireless signal from having to pass through the basement floor. Without a cable, a repeater is only useful somewhere it can still receive a usable signal from the router. If that is not possible, you could test a powerline kit using the sockets you intend to use. For multiple rooms, the placement and compatibility of the Wi-Fi access points also matter.
You can run an Ethernet cable to the basement and want Wi-Fi there from a wired access point. TP-Link describes access point mode for use with an Ethernet connection.
You want a connection in the archive room and are comparing a repeater placed where there is a router signal with powerline using suitable sockets. The Consumers’ Association recommends positioning Wi-Fi access points so they can communicate effectively with one another.
You also want to reach other club rooms, so you need to assess the placement, connection and compatibility of multiple Wi-Fi access points. TP-Link describes Ethernet backhaul for compatible Deco systems.
For access to a single basement room, the main consideration is how the Wi-Fi access point itself connects to the router. The percentages below link each buying priority to a specific scenario for this decision.
| What to consider | What to check before buying | Who is this most important for? |
|---|---|---|
| Connection to the basement | Is there a cable route, and does the device have an Ethernet port and access point mode? | If I can run a cable to the archive room, I want to connect the Wi-Fi access point by cable rather than send the signal through the floor. Around 28% of consumers make the cable route their main buying priority. |
| Powerline without an Ethernet cable | Is it a complete kit with Wi-Fi at the basement end, and can you test both sockets? | If running a cable is impractical and the floor weakens the Wi-Fi signal, I want to know whether powerline works through the sockets the club can use. Around 22% of consumers prioritise basement coverage via powerline. |
| Wireless repeater | Can you find a position in between where the repeater can still receive a usable signal from the router? | If I do not want to run a cable, I need to find a position where the repeater can still get a good enough signal from the router. Around 22% of consumers prioritise extending an existing wireless connection. |
| Coverage in multiple rooms | How many rooms need coverage, and are multiple access points compatible with one another or able to connect by cable? | If other club rooms also need Wi-Fi, I want to consider the placement and connection of every access point. Around 17% of consumers prioritise coverage beyond the archive room. |
| Access to archive data | Does the archive contain personal data? If so, also assess access rights and appropriate network security. | If the archive contains personal data, I want to prevent unauthorised access, not just sort out Wi-Fi coverage. Around 11% of consumers make access security their top buying priority. |
A repeater needs to be able to receive a signal from the router. The Consumers’ Association points out that Wi-Fi access points need to be able to communicate effectively with one another.
Test a position in between first. If that does not work, look into running a cable or test powerline using the sockets you intend to use.
You need adapters at both the router and basement ends to create a new powerline connection; an additional adapter is not the same as a starter kit. devolo says that Magic and dLAN are not compatible with one another.
Check what is included in the kit, whether it provides Wi-Fi at the receiving end and whether it is compatible with adapters the club already uses.
A quoted maximum speed does not tell you how the connection will perform where you work. The Consumers’ Association assesses Wi-Fi and wired connections in different locations.
Choose your connection method first, then test the connection in the archive room.
The RE705X is an option for wireless extension or use as a wired access point; compatible Deco models can use Ethernet backhaul.
The Magic 2 WiFi next combines powerline with Wi-Fi for a room that is difficult to reach with a wireless connection.
The FRITZ!Repeater 1200 AX is a repeater with a LAN connection that is worth comparing, for example alongside an existing FRITZ!Box.
The EAX15 is an option for extending an existing wireless network.
These product picks include powerline Wi-Fi, mesh systems, wireless repeaters and wired access points for a basement room.
No image available
A powerline Wi-Fi starter kit to consider if the wireless connection between floors is weak and you do not want to run an Ethernet cable to the basement.
The product title says it is a starter kit. Test the connection using the sockets you intend to use; performance may vary from one socket to another.
Before use, check that the version actually being sold meets the applicable EU requirements and bears the required CE marking.
No image available
A set with multiple mesh access points to consider if other rooms as well as the basement need coverage.
The title specifies Wi-Fi 6 (802.11ax) and dual-band (2.4 GHz/5 GHz). The product description lists three gigabit Ethernet ports per unit.
Adding multiple access points will not automatically fix a weak connection between them; placement and the connection between them still matter. Before use, check that the version being sold meets the applicable EU requirements and bears the required CE marking.
No image available
A wireless repeater to consider if you can find a position in between where the device can still receive a usable signal from the router.
The product description lists 2.4 GHz Wi-Fi, two external antennas and setup via the Mi app.
Test the placement before relying on a connection in the archive room. Before use, check that the version actually being sold meets the applicable EU requirements and bears the required CE marking.
No image available
A repeater option to consider if you can position the device within range of the existing network.
The product description lists dual-band Wi-Fi and an Ethernet port; the product title specifies 10, 100 and 1000 Mbit/s.
Before use, check that the version actually being sold meets the applicable EU requirements and bears the required CE marking.
No image available
A wired access point to consider if you can run an Ethernet cable to the basement.
The product title lists N up to 300 Mbps, two antennas, WPS and passive PoE. The product description mentions access point mode and Ethernet ports.
Using it as a wired access point requires an Ethernet connection to the basement. Before use, check that the version actually being sold meets the applicable EU requirements and bears the required CE marking.
Only if you can place the repeater somewhere in between where it can still receive a usable signal from the router. Test that position first. If the signal through the floor is unusable, you could look into running a cable or try a powerline kit using the sockets you intend to use.
Connect one adapter to the router and test the second in the socket by the archive. devolo recommends plugging adapters directly into wall sockets and points out that power supplies and dimmers can affect transmission, so check the connection where you plan to use it.
Check whether the offer is for a complete kit, an additional adapter or a repeater. Also ask which warranty and returns terms apply to the actual buyer, especially if the club is placing the order.
Radio equipment offered for sale in the Netherlands must meet the applicable European requirements and bear the required CE marking. The Dutch Digital Infrastructure Inspectorate says the marking must be on the equipment, so check the version actually being sold: a model listing alone does not confirm that the item supplied bears the marking.
If the club processes personal data, it must protect it appropriately and prevent unauthorised access. The Dutch Data Protection Authority says that appropriate measures depend on the processing and the risks; the description alone does not tell us whether the archive contains personal data.