First, check the connection by the router and where you plan to watch: extending your Wi-Fi won’t fix a slow internet connection. If you can run a cable to the basement, a wired access point gives you a direct way to get Wi-Fi there. Without a cable, your choice between a repeater and powerline depends on the signal at the point in between or how well the connection works over your home’s electrical wiring.
Who is this choice relevant to?
Viewer experiencing buffering in the basement
First, this viewer wants to find out whether interruptions are caused by their internet connection or poor Wi-Fi coverage where they’re watching. The Consumers’ Association recommends running a speed test over an Ethernet cable.
Viewer who can run a cable
This viewer wants to connect the basement by cable and find out whether a direct connection is enough or whether they also need an access point for wireless devices.
Viewer without a cable route
This viewer needs to choose between a repeater placed where the router’s signal is usable and a powerline kit that they can test at home over their existing electrical wiring.
What should you look for?
Start by testing the connection where you’ll be watching, then see whether it’s possible to run an Ethernet cable to the basement. Without a cable, reception at the point in between or how well the connection works through your electrical sockets will determine which option you can test at home.
| What to consider |
What should you look for? |
Who is this important for? |
| A stable connection where you watch |
Compare a test using a cable by the router with a test and playback check in the basement. |
I want the recording to play without interruptions in the basement, and first need to know whether the problem is with my internet or Wi-Fi. Around 36% of consumers say stable playback is their top priority. |
| Wired connection to the basement |
Check whether the model has access point mode and whether your playback device has an Ethernet port. |
If I can run a cable to the basement, I want to make use of it and find out whether I also need Wi-Fi there. Around 29% of consumers say a wired connection in the basement is their top priority. |
| A solution without running a new Ethernet cable |
For a repeater, look for a spot in between where the router’s signal is usable. For powerline, check that the kit includes the adapters you need and that any existing adapters are compatible. |
If I can’t run an Ethernet cable, I want to know which connection will work at home without assuming there’ll be a strong signal in the basement. Around 21% of consumers say a solution that doesn’t require a new cable is their top priority. |
| Router compatibility and running costs |
Check your router’s mesh technology and find out what power and connections your chosen setup requires. |
I want to keep using my router without buying mesh features that won’t work with it. I’ll also take into account equipment that needs to stay switched on. Around 14% of consumers say compatibility and running costs are their top priority. |
Common buying mistakes
-
Putting the repeater where the router’s signal is already lost
A wireless repeater needs to receive the existing network first. Placing it in the basement won’t help if the signal is already too weak there.
Try a spot in between and check the reception there. If the signal isn’t usable, look into running a cable or test powerline using the sockets you plan to use.
-
Treating advertised speeds as guaranteed streaming speeds
The advertised Wi-Fi or transfer speed doesn’t tell you how fast the connection will be where you watch. Distance, obstacles and the connection to the Wi-Fi point all make a difference.
Compare an actual test and playback check in the basement with the requirements of the service you use to watch the recording.
-
Assuming all mesh products work together
OneMesh, AiMesh and FRITZ! mesh features each have their own requirements. A standard Wi-Fi connection doesn’t automatically mean the mesh features will work.
Before you buy, check your router model and which mesh technology it explicitly supports.
-
Buying a single powerline adapter as a complete starter kit
An expansion adapter may be designed for an existing powerline network, so it won’t necessarily be a complete kit to get you started.
Check what’s included in the box, whether it’s compatible with your existing adapters and how well it works with the sockets you want to use.
You may still need a second adapter if you buy a single expansion adapter.
Brands to compare
TP-Link
The RE605X and RE705X are Wi-Fi repeaters with access point mode.
- TP-Link lists a signal indicator and gigabit port for the RE605X. The manufacturer also says the RE705X has access point mode.
- The OneMesh integration described requires a compatible OneMesh router. Advertised wireless speeds don’t tell you the range or speed you’ll get in a basement.
FRITZ!
The FRITZ!Repeater 1200 AX is a compact option for a repeater setup or an extension over LAN.
- FRITZ! lists a gigabit LAN port and mesh compatibility with a FRITZ!Box.
- The model can also be used with other routers, but don’t expect the FRITZ! mesh features described to work with them.
ASUS
The RP-AX58 is designed for wireless extension or use as an access point with an Ethernet cable.
- ASUS documents access point mode and AiMesh for compatible routers.
- Some Wi-Fi 6 features require compatible devices, and 160 MHz isn’t available everywhere. These features alone don’t tell you how well the signal will travel through a basement floor.
devolo
The Magic 2 WiFi next Starter Kit uses powerline to extend Wi-Fi to another room.
- According to devolo, the starter kit includes two adapters, and the Wi-Fi adapter has two gigabit LAN ports.
- The manufacturer says Magic adapters aren’t compatible with the dLAN range. The maximum powerline speed isn’t a guaranteed speed over your home’s electrical wiring.
NETGEAR
The EAX15 is a Wi-Fi 6 extender for extending an existing network.
- NETGEAR lists a gigabit port and the option to use your existing network name.
- These are manufacturer specifications; they don’t tell you what range or speed you’ll actually get in a basement.
Joybuy products for this setup
These products suit three options: powerline over your existing electrical wiring, a wireless repeater or a wired access point. The Dutch Authority for Digital Infrastructure says that radio equipment placed on the market in the Netherlands must meet the applicable EU requirements and carry the correct CE marking. Check the marking on the version you’re buying.
No image available
TP-Link TL-WPA7517 KIT powerline adapter starter kit
A good fit for connecting over your existing electrical wiring when running a new Ethernet cable to the basement isn’t practical. Test the kit using the sockets you actually plan to use.
View at Joybuy
No image available
WiFi Repeater Pro Black
For extending an existing Wi-Fi network wirelessly. Place the repeater somewhere it can still receive a usable signal from the router, then test playback in the basement.
The product information lists a 2.4GHz signal; check that it suits your devices and setup.
View at Joybuy
No image available
TP-Link Omada EAP673-Extender network repeater
For extending an existing network wirelessly. The installation instructions say to place it within range of that network; check the reception before settling on a permanent spot.
The product name lists 10/100/1000 Mbit/s. This figure isn’t a measurement of the speed you’ll get in your basement.
View at Joybuy
No image available
TP-Link TL-WA801N access point and Wi-Fi extender
The product information lists both access point and range extender modes. Access point mode is suitable if you have an Ethernet cable running to the basement; check which mode and power supply your setup requires.
The product name lists N up to 300 Mbps, two antennas and Passive PoE.
View at Joybuy
No image available
TP-Link Omada EAP613 wireless access point
An access point for getting Wi-Fi from a wired connection in the basement. The product information lists PoE, Passive PoE or DC as power options; check which one suits your setup.
The product name lists 1775 Mbps and Power over Ethernet (PoE).
View at Joybuy
Frequently asked questions
How can you check whether a Wi-Fi extender will play your theatre recording?
First, check your internet speed using a cable by the router, then test the connection on your playback device in the basement. For Netflix, Netflix recommends a stable connection of at least 3 Mbps for 720p, 5 Mbps for 1080p and 15 Mbps for 4K. These guidelines aren’t automatically the requirements for every theatre recording or streaming service.
Where should you place a wireless repeater?
Put it somewhere it can still receive a good signal from the router, rather than automatically placing it next to the screen in the basement. Use the placement indicator or app if your model has one, then test again where you plan to watch. Distance and obstacles affect the connection.
Do you have to pay extra for your statutory guarantee when buying online?
No. According to ACM ConsuWijzer, your statutory guarantee applies alongside any guarantee offered by the retailer or manufacturer. If a product is faulty, the retailer is responsible for providing an appropriate solution. For ordinary online consumer purchases, you’ll generally also have a statutory 14-day cooling-off period from delivery, subject to applicable exceptions.
Do you need a licence for normal Wi-Fi use in the Netherlands?
The Dutch Authority for Digital Infrastructure lists Wi-Fi as an example of frequency use that doesn’t require a licence. Radio equipment offered on the Dutch market must meet the applicable requirements and carry the correct CE marking. Check the version you’re buying and follow the instructions.
What should you check after installation?
Test again to see whether the recording plays where you plan to watch, and repeat the test after moving the equipment or changing any settings. This lets you assess the connection in the basement itself, rather than relying only on the device’s advertised speed.