Who is this guide for?

Student with a weak signal through the floor

Attends online lessons in the basement while the main router is elsewhere. The connection between floors is therefore the first thing to consider, as also highlighted in Wi-Fi advice from the Consumers’ Association and tests by Tweakers.

Family unable to run an Ethernet cable

Needs a Wi-Fi access point near the study area and is weighing up a wireless connection between units against powerline using the existing electrical wiring. Tweakers discusses wireless backhaul, while devolo describes powerline as a way to send data over your home’s electrical wiring.

Household with fluctuating internet speeds

Wants to find out first whether the internet connection or home network is interrupting lessons. The Consumers’ Association recommends running a speed test on a computer connected by Ethernet.

What should you consider when choosing?

First, check your internet connection and coverage where you study. Then choose based on the cable route, where you can place an extra Wi-Fi access point and whether it will work with your existing equipment.

Check your existing connection first

When: if you’re not yet sure what’s causing interruptions.

Trade-off: a wired speed test and a check of your router’s position can prevent you from replacing equipment unnecessarily, but they won’t always solve the problem if your study area is out of reach. The Consumers’ Association recommends testing over a wired connection.

Wired access point or mesh node

When: if you can run an Ethernet cable to the basement and the signal is too weak through the floor.

Trade-off: you’ll need to run the cable to your study area; also check the mode you’ve selected and the connection diagram. TP-Link describes different wiring requirements for router and access point modes.

Wireless mesh or repeater

When: if running a cable isn’t practical and you can place the extra unit somewhere with a usable connection to the router.

Trade-off: the connection between units still depends on the signal where the extra unit is placed. In an independent test, Tweakers found that clients connected to wireless Deco X50 satellites achieved lower speeds; this result won’t necessarily apply to other models or homes.

Powerline with a Wi-Fi access point

When: if running a new Ethernet cable isn’t practical and the wireless connection between floors proves inadequate.

Trade-off: powerline uses your existing electrical wiring, but you’ll need to test the connection at the sockets you plan to use. devolo’s product claims can’t predict the results in a specific home.

Key consideration What to look for Who it matters most to
Coverage in the basement Check whether an Ethernet cable, Ethernet port and suitable access point mode are available. A stated coverage area doesn’t prove the signal will reach through your floor. If I’m taking online lessons in the basement, I want to know whether the signal can reach across floors reliably. Around 31% of consumers prioritise coverage in their study area.
Stability during lessons Test the connection where you study during normal household use. A wireless connection between units can affect performance; Tweakers reported this for clients connected to wireless Deco X50 satellites. During a live lesson, I don’t want the connection to drop or have to reconnect repeatedly. Around 25% of consumers prioritise a stable connection for lessons.
Practical installation Check the cable route, available sockets and possible locations for a wireless node. devolo describes powerline as using your electrical wiring; test the connection at the sockets you intend to use. If I can’t run an Ethernet cable, I’m looking for a solution that’s practical to set up at home. Around 19% of consumers prioritise installation without extensive cabling.
Identifying the cause First, test the existing router using a wired connection, then compare the connection where you study. The Consumers’ Association recommends a wired speed test to assess your internet connection. I want to find out first whether the internet connection itself is unreliable, so I don’t buy a device that won’t address the problem. Around 13% of consumers prioritise diagnosing the issue and checking whether extra equipment is needed.
Safety and compatibility Check that the specific model has the correct CE marking, that it receives software updates and that it’s suitable for your intended access point or mesh setup. If I’m adding equipment to my existing network, I want to know that it will work with it and meet the relevant requirements. Around 12% of consumers prioritise compatibility and safety.

Buying pitfalls

  • Buying a faster main router without first looking for the cause

    A wired test can show whether the internet connection itself is the limiting factor. A new router won’t automatically fix that.

    First, test the connection at the router using a cable, then check coverage where you take lessons, as recommended by the Consumers’ Association.

  • Assuming an extra wireless mesh node will automatically provide good coverage

    The node itself needs a usable connection. Tweakers found that clients connected to wireless Deco X50 satellites achieved lower speeds; this test isn’t a measurement of your home.

    Check the connection where you plan to place the node. If the signal is weak, compare a wired connection with powerline at the sockets you intend to use.

    A wireless solution may still require you to change the placement, add equipment or run a cable.

  • Taking the stated maximum speed as a guaranteed speed for lessons

    A product specification doesn’t measure the connection in your basement or at the sockets in your home.

    Test the connection where you plan to study and, for powerline, at the sockets you actually intend to use.

Brands to consider as a reference

TP-Link

Deco mesh systems are worth considering if you’re looking for multiple Wi-Fi access points or Ethernet backhaul.

  • TP-Link describes Ethernet backhaul and different wiring diagrams for router and access point modes.
  • In an independent Tweakers test, clients connected to wireless Deco X50 satellites achieved lower speeds. This isn’t a verdict on every Deco model or every basement.

FRITZ!

The FRITZ!Repeater 1200 AX is a useful reference for extending an existing router’s coverage, including when a LAN connection to the basement is possible.

  • According to FRITZ!, the repeater has a gigabit LAN port and can also be used with other modem routers.
  • The full range of FRITZ! mesh features requires compatible FRITZ! equipment. A wirelessly placed repeater still depends on the connection it receives.

devolo

Magic powerline with Wi-Fi is one way to add a Wi-Fi access point without running a new Ethernet cable to the basement.

  • According to devolo, the Magic 2 WiFi next Starter Kit contains two adapters; the Wi-Fi adapter has two gigabit LAN ports.
  • The stated powerline speed isn’t a measurement of the connection at your sockets. devolo says this Magic model isn’t compatible with adapters from the dLAN range.

ASUS

AiMesh is worth considering if you’re looking for an expandable system with a wired connection between nodes.

  • ASUS describes Ethernet backhaul and access point mode for compatible AiMesh setups.
  • ASUS recommends enabling Ethernet backhaul mode only after the nodes have actually been connected by cable.

Joybuy product picks

These products are suitable for wired access points, powerline and wireless Wi-Fi extension for a study area in the basement. Before buying, check that the specific model has the correct CE marking.

Ubiquiti UniFi AP U7 Long-Range access point

Ubiquiti UniFi AP U7 Long-Range

Suitable as a wired access point behind an existing router when you can run Ethernet to your study area.

The product information lists a 2.5 GbE uplink and PoE+ (802.3at). Compatible PoE+ power supply equipment is required; the device is designed for indoor use.

View at Joybuy
TP-Link TL-WPA7517 KIT powerline adapter starter kit

TP-LINK TL-WPA7517 KIT powerline adapter starter kit

Could be suitable if running a new Ethernet cable isn’t practical and you want to try adding a Wi-Fi access point using your existing electrical wiring. Test the connection at the sockets you intend to use.

The product information lists IEEE 1901, Wi-Fi standards, a Type E plug and a stated maximum data transfer rate of 1000 Mbit/s. This maximum isn’t a guaranteed speed for lessons.

View at Joybuy
TP-Link Deco X50 Wi-Fi 6 mesh system with three units

TP-Link Deco X50 Wi-Fi 6 (3-pack)

This mesh system could be suitable if you want to place multiple Wi-Fi access points. When placed wirelessly, each node still depends on its connection to the other units.

The product information lists three units, optional Ethernet backhaul and three gigabit ports per unit.

View at Joybuy
WiFi Repeater Pro Black

WiFi Repeater Pro Black

Could be suitable if you want to extend an existing Wi-Fi network without running an Ethernet cable to the repeater; the description mentions plugging it into a socket and setting it up through the Mi app.

The description lists 2.4 GHz and a stated speed of up to 300 Mbps.

View at Joybuy
Huawei eKit OptiX FG736 BE3600 Dual-Band WiFi 7 mesh router

Huawei eKit OptiX FG736 BE3600 Dual-Band WiFi 7 mesh router

Could be suitable if you’re looking for a mesh router that uses multiple units to create a network across different rooms.

The product information lists dual-band WiFi 7, management through the HUAWEI SmartLife app and the option to use multiple units with a single SSID.

View at Joybuy

Frequently asked questions

How can I find out where the slowdown is before I buy?

Connect a computer to your home network using an Ethernet cable and test the speed there, as recommended by the Consumers’ Association. Then compare it with the connection where you study. This can help you tell the difference between a problem with your internet connection and one with your home Wi-Fi.

Do I have to replace my provider’s router to use my own Wi-Fi equipment?

No, not necessarily. ACM ConsuWijzer explains that in the Netherlands you’re generally allowed to choose your own router; you can also check whether an additional access point will work with your existing router. If you’re replacing connection equipment, ask your provider for the necessary settings if needed.

Can I add an existing devolo dLAN adapter to Magic 2 WiFi next?

No. According to devolo, Magic 2 WiFi next can be expanded with adapters from the Magic range, but adapters from the dLAN range aren’t supported.

Which CE marking should I check for Wi-Fi equipment?

Check that the specific model you want to buy has the correct CE marking. The Dutch Authority for Digital Infrastructure states that radio equipment placed on the market in the Netherlands must meet the relevant European requirements and that CE marking must appear on the equipment.

What can I do if a router breaks down prematurely?

In the Netherlands, statutory consumer rights apply alongside any manufacturer’s warranty. According to ACM ConsuWijzer, a product must do what you could reasonably expect it to do under normal use; there’s no fixed statutory warranty period that applies to every router.