Who is this choice relevant to?

For readers with weak basement Wi-Fi

Your internet works elsewhere in the house, but downloads on your phone or tablet keep stalling in the basement. The Consumers’ Association (Consumentenbond) points out that distance and obstacles such as floors can weaken a Wi-Fi signal. So check the connection between your router and the extra Wi-Fi point, too.

For readers who can run a cable downstairs

You can run an ethernet cable to the basement and want Wi-Fi there without relying on a wireless signal passing through the floor. TP-Link describes a wired connection between Deco units as an option when floors weaken the Wi-Fi signal.

For readers without a cable route

You can’t run an ethernet cable and are comparing a wireless node with Wi-Fi over powerline. The node’s position and the connection through your home’s electrical wiring will both help determine which option works for your home.

What should you look for?

Mesh with ethernet backhaul

Choose this if: you have, or can run, a network cable to the basement.

The trade-off: the nodes don’t have to connect wirelessly through the floor, but running a cable takes some effort. TP-Link lists a wired connection as an option for homes with thick floors.

Fully wireless mesh

Choose this if: a node on an intermediate floor can still get a usable connection to the router and running cables isn’t practical.

The trade-off: don’t automatically put the node in the basement or somewhere the signal is already dropping out. The Consumers’ Association (Consumentenbond) recommends positioning Wi-Fi points so they can reach one another.

Powerline with Wi-Fi

Choose this if: ethernet isn’t an option, the floor makes a wireless connection difficult, and there are power sockets by the router and in the basement.

The trade-off: the connection runs through your electrical wiring. devolo warns that certain sockets or electrical appliances can limit transmission, so test the locations you plan to use.

Improve your existing network

Choose this if: moving the router or changing its settings could solve the problem, or if only the basement needs an extra access point and there’s already a cable there.

The trade-off: a standalone access point doesn’t automatically offer the same mesh features as the equipment you already use. Check the operating mode you need and whether it works with your router.

Start by checking the connection where you’ll be reading. Then you can decide which option suits the cabling in your home.

Buying concern What should you check? Who should consider this?
Connection to the basement Check whether ethernet backhaul is possible. If not, first test the connection where you plan to put a wireless node. If I download magazines in the basement, I want to know whether the extra node can still connect to the router. Around 42% of consumers put the basement connection first.
Installation without a cable Compare a wireless node with powerline Wi-Fi. For powerline, test the sockets you intend to use and check which adapters are included in the kit. Without a cable route, I want Wi-Fi in the basement without running a new network cable. Around 25% of consumers prioritise a cable-free installation.
Compatibility with your router Check the router or access point mode, and whether the mesh features you want work with your existing equipment. I want to keep my current router and avoid features that don’t work together. Around 17% of consumers prioritise compatibility with their existing router.
Running costs and security Compare the energy consumption of the complete setup. Also check the security settings and firmware updates available. If extra nodes are left on for long periods, I pay attention to power use and secure management. Around 16% of consumers prioritise ongoing costs and security.

Avoiding common buying mistakes

  • Buying an extra node without checking the connection to it

    A basement floor or other obstacles can weaken the connection between mesh nodes. A node placed where there’s barely any reception won’t solve the problem by itself.

    First, check the connection and compare a position on the route to the basement with ethernet backhaul. If the signal is too weak there, you may need to change the placement, add another node or run a cable.

  • Assuming advertised Wi-Fi or powerline speeds are the same as your basement download speed

    Your actual connection also depends on the route between the nodes, their placement and, with powerline, the electrical wiring in your home.

    Use the stated speeds to compare product specifications, but test the whole connection where you download your magazines.

  • Assuming all devices work together as one centrally managed mesh network

    FRITZ!’s mesh settings, as described, are designed for a compatible FRITZ! setup. devolo says that Magic adapters can’t be combined with its dLAN range.

    Before buying, check the exact router, product range and operating mode you need.

    An incompatible combination could mean you need to replace or change your equipment after all.

Brands to compare

TP-Link

The Deco X50 range is worth comparing if you’re looking for a mesh system with optional ethernet backhaul.

  • TP-Link says each Deco X50 unit has three gigabit ports and that the system can be connected by cable.
  • The stated coverage isn’t a measurement taken in a basement. Check the exact model and pack size.

ASUS

The ZenWiFi XD5 is worth comparing if you want to explore ethernet backhaul and management through the ASUS Router app.

  • ASUS lists ethernet backhaul as a feature of the XD5.
  • ASUS says 160 MHz on 5 GHz isn’t available in every country. A stated radio speed doesn’t predict your basement download speed.

devolo

Magic 2 WiFi next combines powerline with Wi-Fi for rooms where a wireless connection between nodes may be difficult.

  • According to devolo, you can extend the system with adapters from the Magic range.
  • The manufacturer says the Magic range doesn’t work with dLAN adapters. Certain sockets or electrical appliances can limit transmission, so test the connection at home.

FRITZ!

The FRITZ!Repeater 1200 AX is worth considering if you want to extend a compatible existing FRITZ! mesh network, potentially using LAN.

  • The manufacturer lists one gigabit LAN port and says it can be used with other routers.
  • The shared mesh settings are designed for a compatible FRITZ! setup and won’t automatically work with every router.

Mesh products on Joybuy

This selection includes mesh kits for anyone looking for extra Wi-Fi in a basement room. An extra node will help only if it can get a usable connection to the router, so check your cabling options and test the location you choose.

TP-Link Deco BE68 (2-pack)

TP-Link Deco BE68 (2-pack)

A good fit if you’re looking for a TP-Link Deco mesh kit with two units. Check that the ports and the backhaul you want suit the cable route to the basement.

View on Joybuy
TP-Link Deco E4 (3-pack), dual-band Wi-Fi 5

TP-Link Deco E4 (3-pack), dual-band Wi-Fi 5

A good fit if you’re looking for a Deco kit with three units. The product name specifies dual-band Wi-Fi 5 (802.11ac), for 2.4 GHz and 5 GHz.

View on Joybuy
ASUS ZenWiFi BD4, dual-band Wi-Fi 7

ASUS ZenWiFi BD4, dual-band Wi-Fi 7

A good fit if you’re looking for an ASUS ZenWiFi mesh system. The product name specifies dual-band Wi-Fi 7 (802.11be), for 2.4 GHz and 5 GHz.

View on Joybuy
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System (2-pack)

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System (2-pack)

A good fit if you’re looking for a TP-Link mesh kit with two units. The product name specifies Wi-Fi 6.

View on Joybuy
TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

A good fit if you’re looking for a Deco X50 kit with three units. The product name specifies dual-band Wi-Fi 6 (802.11ax), for 2.4 GHz and 5 GHz.

View on Joybuy

Frequently asked questions

Should you check your internet speed or your Wi-Fi first?

First, check the connection near the router and compare it with the connection in the basement. If the internet is already slow next to the router, an extra Wi-Fi point can’t make your provider’s connection faster. Also check the router’s position and settings.

Where should you put a wireless mesh node?

Put the node somewhere it can still get a usable connection, such as closer to the route to the basement, rather than automatically placing it somewhere with no signal. Use the system’s placement indicator, then test a download where you’ll be reading.

What should you check with powerline and extra Wi-Fi points?

Check whether the kit includes adapters for both ends, and test the sockets you plan to use. devolo lists certain sockets and electrical appliances as possible causes of slower transmission. Extra Wi-Fi points use electricity, so compare the power consumption of the complete setup rather than assuming a fixed annual cost.

Do you need a licence for Wi-Fi in the Netherlands?

According to the Dutch Authority for Digital Infrastructure (Rijksinspectie Digitale Infrastructuur), you don’t need a licence for home Wi-Fi if you use the frequencies designated for it and comply with the conditions of use. The Authority also says that the CE mark must be visible and that radio equipment must be supplied with a declaration of conformity.

What are your rights if an online purchase doesn’t suit you or breaks soon after?

According to the Netherlands Authority for Consumers and Markets’ consumer advice service (ACM ConsuWijzer), you generally have up to 14 days from delivery to change your mind about an ordinary online purchase. Your statutory guarantee is separate from any guarantee period stated by the manufacturer or seller. If a product is faulty, contact the seller.