Basement viewer with the option of a cable
You want to watch a live lecture in the basement and can use or install an Ethernet connection there. You’re looking for a suitable Wi-Fi access point or considering a direct wired connection.
Don’t rush out to buy a new router: first, use an Ethernet cable to check whether your internet connection works properly at your existing router. If the connection is good but your Wi-Fi keeps dropping out mainly in the basement, the right option depends on how you can connect to that room: a wired access point, wireless mesh or powerline. When buying, also check that the radio equipment you choose meets the applicable requirements. The Wi-Fi version on the box is no guarantee of a good connection in your basement.
You want to watch a live lecture in the basement and can use or install an Ethernet connection there. You’re looking for a suitable Wi-Fi access point or considering a direct wired connection.
Installing a cable isn’t straightforward. You want to find out whether a wireless access point or a connection through your mains wiring will work where you watch.
You’re not sure whether the interruptions are caused by Wi-Fi in the basement or your internet connection, and want to avoid buying equipment you don’t need.
First, check the connection at your router, then work out how the signal can reach the basement. This will help you choose an extender that suits the possible cable route and your existing network.
| What to consider | What should you look for when buying? | Who is this important for? |
|---|---|---|
| Getting a connection to the basement | Check whether the model supports Ethernet backhaul and whether you can run a cable to the basement. Test a wireless access point in the planned location. | If I want to watch a live lecture in the basement, I need to know whether the connection there will be good enough; around 36% of consumers prioritise basement connectivity. |
| Extending your network without a network cable | Check where a wireless access point can still receive a signal. With powerline, test the sockets you actually plan to use. | If I can’t run an Ethernet cable, I need another way to connect to the basement; around 29% of consumers prioritise a solution that doesn’t use a network cable. |
| Connecting to your existing router | Check the operating modes, LAN ports and instructions for use with your modem or router. | If my current router works well, I’d rather check first whether I can keep using it; around 21% of consumers prioritise connecting to their existing network. |
| Finding the cause of the problem | Use a cable to check your internet connection at the router and compare it with your experience in the basement. Also check your Wi-Fi placement and settings. | If I don’t know what’s causing the dropouts, I want to avoid buying the wrong equipment; around 14% of consumers prioritise identifying the cause. |
Consumentenbond points out that the Wi-Fi version alone doesn’t tell you how a device will perform in practice. Walls and ceilings can affect the signal.
First work out how the connection can reach the basement, then consider the Wi-Fi version and speed.
A wireless access point needs a usable connection to the router to extend the network. FRITZ! explains that a LAN connection is an option if a repeater needs to be placed outside the router’s Wi-Fi range.
Test reception in the planned location or, if possible, connect the router and access point with a cable.
According to devolo, certain sockets and electrical appliances can affect data transmission over mains wiring.
Test the adapters in the sockets you plan to use for your lecture.
The Dutch government states that there is no fixed statutory guarantee period in the Netherlands. A manufacturer’s guarantee is in addition to your right to a product that meets the terms of the sale.
Keep your proof of purchase and contact the seller if the product is faulty.
The Deco X50 is a mesh option for anyone looking to use several Wi-Fi access points.
The FRITZ!Repeater 1200 AX is an extender for anyone who wants to keep their existing router.
The ZenWiFi XD5 is a mesh system for anyone who wants to use several Wi-Fi access points and may be able to use Ethernet backhaul.
The Magic 2 WiFi 6 next Starter Kit combines powerline and Wi-Fi for situations where using your mains wiring could be a practical way to connect.
This selection includes powerline Wi-Fi and wireless routers, mesh systems and repeaters for extending Wi-Fi to another room.
No image available
A powerline Wi-Fi kit for anyone who wants to extend their network using their existing electrical wiring.
Performance can vary between sockets and may be affected by sources of electrical interference, so test the sockets you plan to use.
No image available
A router to consider if you want to set up a wireless extension with AiMesh.
The product description lists Wi-Fi 6 and AiMesh compatibility. You’ll need another AiMesh-compatible router to extend your network using AiMesh.
No image available
A mesh system with three units for anyone who wants to use several Wi-Fi access points and may be able to connect them with a cable.
Dual-band Wi-Fi 6 (802.11ax); three gigabit ports per unit and optional Ethernet backhaul.
No image available
An option if you want to extend an existing wireless network and still have a connection to your router in the chosen location.
The product description lists 2.4 GHz, speeds of up to 300 Mbps and two external aerials. The repeater needs a usable connection to the router in the location you choose.
No image available
A mesh router to consider if you want to extend Wi-Fi to another room. How well it works in your basement will depend on the connection there.
Dual-band Wi-Fi 7.
First, use a network cable to check the internet connection at your existing router. If it’s consistently poor, look into your connection with your provider. If the connection only drops out in the basement, check the placement and connection of your Wi-Fi access point.
Only if the repeater still has a usable wireless connection to the router there. FRITZ! describes a LAN connection as an option for placing a repeater outside Wi-Fi range. Otherwise, try positioning a wireless repeater somewhere with better reception.
Test the adapters in the sockets you actually plan to use. devolo recommends plugging them directly into wall sockets and notes that things such as power supplies and dimmer switches can affect transmission.
According to the Dutch Authority for Digital Infrastructure, Wi-Fi frequencies can be used without a licence in the Netherlands, and there is no notification or registration requirement, provided you meet the conditions of use. Set your router to the correct country; the authority warns that choosing the wrong country setting could result in transmission power that isn’t permitted.
You’re entitled to a product that meets the terms of the sale. According to the Dutch government, there is no fixed statutory guarantee period. A manufacturer’s guarantee is on top of this. Contact the seller if the product is faulty.