Who is this choice relevant to?

Gamer with weak basement Wi-Fi

If your internet works well elsewhere but a game update downloads slowly in one basement room, see if there’s a spot in between where a repeater can still receive a signal from the router. You could also check whether you can connect your console by cable. The Consumentenbond recommends positioning Wi-Fi points with as few obstacles between them as possible.

Gamer with a tricky basement floor

If there’s barely any usable Wi-Fi signal just above the basement either, compare running a cable with using powerline rather than assuming a repeater in the basement will solve the problem. Powerline performance depends on your electrical wiring, so you’ll need to test it on site.

Household with several Wi-Fi dead zones

If you have weak Wi-Fi in other rooms as well as the basement, a mesh setup with multiple points may be worth considering. Check that the points are positioned where they can maintain a usable connection with each other; the Consumentenbond highlights the importance of this link between them.

What should you look for in basement Wi-Fi?

Wireless repeater

Choose this option: if the internet connection is good by the router and there’s a spot between the router and the basement with a usable Wi-Fi signal.

Bear in mind: the repeater still relies on its wireless connection to the router; an LAN port won’t make that connection wired.

Ethernet cable to your console or access point

Choose this option: if you can run a cable to the basement and the measured internet connection by the router is fast enough.

Bear in mind: you’ll need a suitable route for the cable; if you’re using an access point, also check that your chosen model has an access point mode.

Powerline with Wi-Fi or Ethernet

Choose this option: if running a cable is difficult and Wi-Fi doesn’t work well enough through the floor.

Bear in mind: performance depends on your electrical wiring; test the connection using the sockets you plan to use.

Mesh Wi-Fi with multiple points

Choose this option: if other rooms also need coverage and the points can maintain a usable connection with each other.

Bear in mind: you’ll need several points, which must be positioned carefully; a wired connection between points can help avoid a weak wireless link.

What to consider What to look for when buying Who is this most relevant to?
Usable connection to the basement Test possible spots in between; without a usable signal from the router, a wireless repeater won’t solve the problem there. The Consumentenbond recommends keeping obstacles between Wi-Fi points to a minimum. I want to know if there’s a spot before the basement where the router signal still comes through well; otherwise, a repeater there won’t help much. Around 36% of consumers prioritise a usable connection to the basement.
Actual download speed Measure the speed via Ethernet by the router and then where you download the update. Compare measured speeds, not just the stated Wi-Fi speeds. If the internet connection is already slow by the router, extra Wi-Fi equipment won’t fix it. Around 29% of consumers prioritise download speed and identifying the bottleneck.
Installation and network compatibility Check whether you can run a cable, whether the mesh feature you want works with your router, and whether powerline connects in your home. For radio equipment, also check the CE marking and conformity information for the version on offer; the Dutch Authority for Digital Infrastructure explains the applicable European requirements. I don’t want to choose a solution that isn’t right for my router or home, so I check the cable route and connections first. Around 21% of consumers prioritise easy installation and compatibility.
Total cost and after-sales support Check how many points are included in the box, any installation costs and the update support for your chosen model. Don’t assume there’s a fixed statutory warranty period in the Netherlands. If I only want to improve the basement, I don’t want to buy points I don’t need, and I want to know what after-sales support is available. Around 14% of consumers prioritise total cost and after-sales support.

Basement Wi-Fi buying pitfalls

  • Putting a repeater in the basement where the router signal has already dropped out

    A wireless repeater needs a usable connection to the router itself. Placing it somewhere without a strong enough signal won’t solve the coverage problem.

    Test a spot in between first. If there’s no usable connection there, look into running a cable or test powerline using the sockets you plan to use.

  • Assuming a stated Mbps figure is the download speed for your update

    A product specification doesn’t tell you how fast your internet connection is or what speed you’ll get on the route to the basement.

    Measure the connection via Ethernet by the router and compare it with a measurement where you download the game update.

  • Assuming powerline works the same way in every basement

    Performance depends on your electrical wiring. TP-Link warns that its Powerline Deco may be affected by, among other things, filtered extension leads and separate consumer units.

    Follow the instructions for your chosen model and test the connection using the sockets you plan to use.

    Finding suitable sockets may take extra time.

  • Assuming a mesh or repeater name guarantees compatibility with your router

    TP-Link’s OneMesh requires a compatible OneMesh router. FRITZ! describes the specific mesh integration of the FRITZ!Repeater 1200 AX with a FRITZ!Box.

    Check your router model and the feature you want to use; don’t rely on a brand name on the box alone.

    You may need additional equipment to use the mesh feature you want.

Brands and models to consider

TP-Link

The RE605X is a repeater for a specific coverage problem, while the Deco X50 is a mesh system with multiple points. They have different setups and are not an independent measure of basement performance.

  • According to TP-Link, the RE605X has a placement indicator, a gigabit port and access point mode.
  • According to TP-Link, each Deco X50 point has three gigabit ports.
  • OneMesh requires a compatible OneMesh router. Check how many points are included in the Deco X50 pack you choose.

FRITZ!

The FRITZ!Repeater 1200 AX may be worth considering if you’re looking for a repeater with a LAN connection or already use a FRITZ!Box.

  • FRITZ! states that it works with other routers and has a gigabit LAN connection.
  • The mesh integration described is specifically for a FRITZ!Box. A LAN port on a wirelessly connected repeater doesn’t make the connection to the router wired.

devolo

According to devolo, the Magic 2 WiFi 6 next Starter Kit uses powerline to carry the network connection through the electrical wiring to a Wi-Fi point.

  • According to devolo, the product range combines Wi-Fi and LAN in a powerline setup.
  • Performance and speed depend on your electrical wiring; a stated maximum speed isn’t a measurement of performance in your basement.

Joybuy products for basement Wi-Fi

This selection includes powerline, mesh, wireless repeaters and a wired access point for different basement and Wi-Fi setups.

TP-LINK TL-WPA7517 KIT powerline adapter starter kit

TP-LINK TL-WPA7517 KIT Powerline Adapter Starter Kit

May suit you if Wi-Fi is weak through the basement floor and running a cable is difficult; the connection runs through your electrical wiring and needs to be tested with your setup.

The product name identifies this as a powerline adapter starter kit.

View at Joybuy
TP-Link Deco X50 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50 3-Pack Dual-Band Wi-Fi 6

May suit you if other rooms need coverage as well as the basement; position the mesh points where they can maintain a usable connection with each other.

The product name specifies dual-band (2,4 GHz/5 GHz), Wi-Fi 6 and a 3-pack. TP-Link states that each point has three gigabit ports; check the packaging for the version you choose.

View at Joybuy
Wi-Fi Repeater Pro Black

Wifi Repeater Pro Black

May suit you if there’s a spot between the router and the basement where the existing Wi-Fi network is still usable; don’t place the repeater somewhere the router signal has already dropped out.

The product name describes this model as a Wi-Fi repeater.

View at Joybuy
TP-Link Omada EAP673-Extender Network Repeater White

TP-Link Omada EAP673-Extender Network Repeater White

May suit you if there’s a spot between the router and the basement with a usable existing network signal; check in advance that this repeater is suitable for the connection you need.

The product name identifies the model as an EAP673 extender and network repeater.

View at Joybuy
TP-Link TL-WA801N access point and Wi-Fi network extender

TP-Link TL-WA801N Wireless Access Point/WiFi Network Extender

May suit you if you can run a network cable to the basement and want Wi-Fi there; check that access point mode is compatible with your network setup.

The product name specifies 2,4 GHz, 10/100 Mbit/s Ethernet, Passive PoE, up to 300 Mbps, two antennas and WPS. These are product specifications, not the measured download speed of a game update.

View at Joybuy

Frequently asked questions

Does the Wi-Fi booster need to be in the basement?

Not if it can barely connect to the router there. First, try a spot with fewer obstacles and a usable signal; if the connection remains weak, a cable or a powerline connection tested on site are alternatives.

Why is your game update still slow when the Wi-Fi indicator is full?

First, measure your internet speed using a computer connected to your home network via Ethernet. If the connection is already slow by the router, investigate your internet service before buying Wi-Fi equipment; the Consumentenbond recommends a wired test.

Does powerline always work in a basement?

No, the connection depends on the electrical wiring in your home. Follow the instructions for your chosen model and test the connection using the sockets you plan to use; TP-Link recommends plugging its Powerline Deco directly into a wall socket rather than an extension lead that may filter the signal.

What product requirements apply to a Wi-Fi booster in the Netherlands?

Radio equipment placed on the market in the Netherlands must meet the applicable European requirements and carry a CE marking. The Dutch Authority for Digital Infrastructure recommends checking the marking and conformity information for the version on offer; a product name alone doesn’t prove that the information applies to that version.

When is mesh a better choice than a single repeater?

Mesh with multiple points is most relevant if other rooms need coverage too. Check that the points can maintain a usable connection with each other and how many points are included in the pack you choose; mesh won’t automatically solve a weak signal through the basement floor.