Who should consider these options?

Club administrator with the option to run a cable

Wants to keep the existing network and install a wired Wi-Fi access point near the basement workspace. TP-Link describes Ethernet backhaul as a way to connect Deco units by cable.

Club administrator without a network cable

Needs a connection to the basement via wireless mesh or the mains, and wants to test reception at the intended location first. The Consumers’ Association (Consumentenbond) points out that walls and ceilings can interfere with the Wi-Fi signal.

Administrator responsible for restricted archive material

Wants to avoid confusing network coverage with permission to read documents. If the archive contains personal data, the Dutch Data Protection Authority calls for appropriate security and careful management of access rights.

What should you look for?

Check reception at the workspace, then decide whether you can run a cable to a Wi-Fi access point. Assess access to the archive separately from network coverage.

Concern What to look for Who is this important for?
Connection in the basement Check reception at the workspace; see whether Ethernet backhaul is possible and what power supply the access point needs. If the archive needs to be accessible in the basement, reception there is the priority. Around 36% of consumers prioritise a reliable basement connection.
No cable to the basement Check wireless reception where you plan to place the node, or test powerline using the sockets you intend to use. If you can’t run a network cable, you’ll need another way to connect the floors. Around 29% of consumers prioritise this need.
Restricted access to the archive Check who has access to the archive system; assess any guest network separately. If the archive contains personal data, coverage alone isn’t enough to control access. Around 21% of consumers prioritise restricted access.
Installation and management Check whether you can keep the existing router and how many Wi-Fi access points and connections the setup will require. If you want to avoid unnecessary equipment and complicated management, start by looking at what you already have. Around 14% of consumers prioritise simplicity and a manageable purchase.

Common purchasing mistakes

  • Buying a faster main router without checking the basement

    A floor or ceiling can weaken the Wi-Fi signal, even if your broadband package is fast. So a new router won’t necessarily solve the problem at the workspace.

    Check the signal upstairs and in the basement, and see whether a wired Wi-Fi access point is possible before replacing the main router.

  • Placing a wireless mesh node where there’s barely any signal

    The node also needs to maintain a connection to the rest of the network. A spot behind a floor that blocks the signal can therefore be unsuitable.

    Test reception where you plan to place the node, then check it again at the basement workspace. Compare the results with a wired connection or a powerline test.

  • Assuming the advertised powerline speed is what you’ll get in practice

    Devolo says the theoretical maximum speed is based on ideal conditions; factors such as interference and the electrical wiring can affect the actual connection.

    Test the adapters in the sockets the club plans to use, and check whether any existing adapters are compatible.

  • Confusing Wi-Fi access with access to the archive

    A good network connection doesn’t determine who is allowed to read archive documents. If the club processes personal data, appropriate security measures and access rights are also required.

    Decide which data needs protecting and who is allowed to view it; manage access to the archive system separately.

Brands to consider

TP-Link

TP-Link says Deco mesh nodes can be connected using Ethernet backhaul; the manufacturer also says the PX50 is designed to connect via the mains.

  • A wired Deco connection can avoid the wireless link between floors. TP-Link describes several connection options for router and access point modes.
  • A wireless node still depends on reception at its location. The PX50 listing doesn’t show how well powerline will work in a particular club building.

devolo

According to devolo, Magic Wi-Fi offers a way to use the mains to connect network nodes.

  • devolo says the Magic 2 WiFi next has LAN ports.
  • Actual throughput also depends on the condition of the electrical wiring. The manufacturer says Magic and dLAN are not compatible with each other.

FRITZ!

The manufacturer explains how to connect a FRITZ!Repeater 1200 AX to a FRITZ!Box via LAN as an additional Wi-Fi access point.

  • A wired connection is one way to extend an existing FRITZ! network to a specific area.
  • If you’re using a different main router, check which features are available; the described connection doesn’t confirm compatibility with that setup.

ASUS

ASUS describes Ethernet backhaul for AiMesh and ZenWiFi setups, including configurations using access point mode.

  • The setup instructions include options for using an existing modem or switch in the configuration.
  • The connection method described requires careful attention to cabling and switch ports. Without testing its placement, a mesh system can’t guarantee coverage in a particular basement.

Ubiquiti

Ubiquiti describes the UniFi U6+ as an access point for small and medium-sized business environments.

  • A wired access point could suit a setup with a network connection at the required location.
  • The product information specifies ceiling mounting and offers the PoE adapter separately. An access point isn’t necessarily a replacement for an internet router; check the power supply and management requirements too.

Joybuy products for basement Wi-Fi

This selection includes wireless mesh and repeater options, a wired access point and a router that could be used as a replacement or moved to a different location. The right setup depends on the connection you can achieve in the basement.

Check the relevant requirements and CE marking for the specific device; a product listing alone doesn’t confirm compliance.

TP-Link Deco E4 mesh system, 3-pack

TP-Link Deco E4 (3-pack)

A wireless mesh system for several locations; the node in the basement still needs a usable incoming Wi-Fi signal.

Wi-Fi 5, dual-band (2.4 and 5 GHz) and two Ethernet ports per unit. Set up and manage it using the Deco app.

Joybuy
Ubiquiti UniFi AP U7 Long-Range access point

Ubiquiti UniFi AP U7 Long-Range

A wired access point for a setup with a network connection where you want to place the Wi-Fi access point.

Wi-Fi 7, dual-band, five spatial streams and PoE+ (802.3at). The description specifies ceiling or wall mounting and management via UniFi Network; compatible PoE+ equipment is required for power.

Joybuy
ASUS RT-AX52 AX1800 AiMesh router

ASUS RT-AX52 AX1800 AiMesh

An option if you’re replacing or moving the main router; a new router alone won’t guarantee reception in the basement.

Wi-Fi 6, dual-band (2.4 and 5 GHz) and AiMesh compatibility.

Joybuy
TP-Link Deco X50 mesh system, 3-pack

TP-Link Deco X50 (3-pack)

A mesh system with Ethernet ports on each unit; wired backhaul is an option if you can run cables between the nodes.

Wi-Fi 6, dual-band (2.4 and 5 GHz) and three Gigabit Ethernet ports per unit. TP-Link describes Ethernet backhaul for Deco; check which connection method suits the mode you’ve set up.

Joybuy
WiFi Repeater Pro Black

WiFi Repeater Pro Black

A repeater for extending an existing Wi-Fi network; it needs to be placed somewhere with a strong enough signal to relay the connection.

2.4 GHz; the product description specifies up to 300 Mbps and up to 24 devices. It says to set it up near the router first, then move it to a power socket.

Joybuy

Frequently asked questions

Do you need to replace your existing router to get Wi-Fi in the basement?

Not necessarily: check the signal first and see whether an additional access point in the right place will do the job. If you move a provider-supplied modem, check for any restrictions imposed by your provider too.

How do you connect a Deco node by cable to an existing router?

Use the connection method that suits Deco’s router or access point mode. For router mode, TP-Link describes connecting via the LAN side of the main Deco. For access point mode, it also describes connecting to the main modem or router. Then check in the app that Ethernet backhaul is active.

Can you rely on the advertised powerline speed?

No, it doesn’t automatically tell you what speed you’ll get in the club building. Devolo says the theoretical maximum speed is based on ideal conditions; factors such as interference and the electrical wiring can affect real-world performance. Test the connection using the sockets you plan to use.

What do you need to arrange if the club archive contains personal data?

The club must protect personal data appropriately and control access to it. The Dutch Data Protection Authority stresses that the measures required depend on the specific risks; a guest network alone doesn’t determine who can read archive documents.

Do you need a licence for Wi-Fi in a club building in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, Wi-Fi at home or in business premises doesn’t require a licence if you use the designated frequencies and comply with the conditions of use. This doesn’t replace the requirements for the device being sold: for the specific model, check the relevant requirements and CE marking, among other things.