Who presents in the basement?

Presenter who can run a cable

You can run Ethernet to the basement and install a Wi-Fi access point there. This means the access point doesn’t have to rely on a wireless signal travelling through the floor. The Consumentenbond and Tweakers both highlight placement and wired connections as important considerations when extending Wi-Fi coverage.

Presenter who can’t run a cable

You want to use a wireless mesh unit, so you’ll need to check that it can still get a good connection to the router from its intended location. The Consumentenbond recommends taking obstacles and the placement of Wi-Fi units into account.

Organiser using a shared presentation screen

You might be using a laptop and a casting receiver, possibly with guests joining in too. Check that the devices can communicate with each other on the network you choose. Google Streaming Help says that, to cast from Chrome, your computer and receiver must be connected to the same Wi-Fi network.

What should you look for when choosing?

First, test the Wi-Fi where you’ll be using your laptop and screen. Then choose between a wired access point and wireless mesh based on the connections available, and check that screen sharing works on the network.

Consideration What to look for when buying Who is this important for?
Basement coverage Test the signal where you’ll be presenting. Check whether you can run Ethernet to the basement and install a suitable Wi-Fi access point. I want my laptop and screen to connect reliably in the basement. Around 36% of consumers prioritise reliable basement coverage above all else.
Screen sharing Check which presentation technology the screen uses, then test it with the laptop and receiver you’ll be using. I want to show my presentation on the screen from my laptop, including when guests join in. Around 29% of consumers prioritise finding and using the receiver above all else.
Connection to the router Check the available LAN ports, the cable route and whether your chosen unit can operate in access point or LAN bridge mode. I want to keep my existing modem-router and simply add Wi-Fi in the basement. Around 21% of consumers prioritise compatibility with their existing equipment.
Power and management For PoE, check that the required power standard is compatible with your equipment, and see what’s included with the model you choose. I want to know in advance what power supply, equipment and settings the installation will require. Around 14% of consumers prioritise installation and management above all else.

Common purchasing mistakes

  • Placing a mesh unit somewhere without a usable signal

    A wireless mesh unit needs a usable connection to another unit. If the signal already drops out where you place it, the unit won’t fix the problem by itself.

    Test the connection in the intended location. If the basement floor is particularly challenging, compare it with a wired access point too.

    You may need to move the unit later; a wired solution requires a cable route to the basement.

  • Assuming stronger Wi-Fi means screen sharing will work

    Your laptop might have Wi-Fi while the casting receiver you’re using can’t be reached from that network. A separate guest network may also handle access to shared devices differently.

    Test in advance with the laptop, receiver and guest settings you plan to use during the presentation.

  • Choosing a PoE access point without checking the power supply

    An Ethernet port won’t automatically provide the power your chosen device needs. The supported PoE standard varies by model.

    Check the power requirement for the exact model against your switch or injector, and see what’s included in the box.

    Installation may require a compatible PoE switch or injector, as well as cabling.

  • Taking the advertised range or Wi-Fi speed as a guarantee of basement coverage

    An advertised figure on its own doesn’t tell you how well the connection will work in your basement. The Consumentenbond also points out that the Wi-Fi version alone doesn’t determine performance.

    Choose the number and placement of units based on the room and a connection test.

Relevant brands

TP-Link

Deco mesh systems could be a good fit if you want to use several Wi-Fi units. The Deco X50 and Deco X50-PoE are different models.

  • TP-Link describes Ethernet backhaul as an optional feature for the Deco X50.
  • According to TP-Link, the Deco X50-PoE supports PoE via IEEE 802.3at or 802.3bt, but not 802.3af. Check the exact model and the number of units.

FRITZ!

The FRITZ!Repeater 1200 AX is an option if you want to extend an existing router with an extra Wi-Fi access point.

  • FRITZ! describes a gigabit LAN port and the option to use it as a LAN bridge behind a router from another brand.
  • The FRITZ! mesh features described are linked to use with a FRITZ!Box.

Ubiquiti

The UniFi U6+ is a standalone Wi-Fi access point for a wired basement installation.

  • Ubiquiti’s official specifications for this model list a gigabit RJ45 connection and PoE power.
  • An access point isn’t a standalone replacement for a modem-router. Check the power supply and the management environment you intend to use.

ASUS

ZenWiFi mesh kits could be a good option if you need several Wi-Fi units.

  • ASUS documents Ethernet backhaul and access point mode for AiMesh and ZenWiFi setups.
  • Connection instructions depend on the setup you choose. Don’t assume that every ASUS router offers the same features.

Joybuy products for a basement Wi-Fi access point

These products are designed for adding a Wi-Fi access point via Ethernet or extending coverage with mesh. Before choosing, check how many units you need, how they’ll connect to your existing network and which power supply is compatible with the model.

Ubiquiti UniFi AP U7 Long-Range

Ubiquiti UniFi AP U7 Long-Range

An option for a wired basement access point if you want to keep your existing router.

Wi-Fi 7, dual-band and a 2.5-GbE uplink. Compatible 802.3at equipment is required for PoE+.

View at Joybuy
TP-Link Deco X50 (3-Pack)

TP-Link Deco X50 (3-Pack)

A good fit if you want to use several Deco mesh units and can run a cable to one of them.

Wi-Fi 6, dual-band (2.4 GHz/5 GHz) and three gigabit Ethernet ports per unit. Ethernet backhaul is optional and requires a cable connection between Deco units.

View at Joybuy
TP-Link Omada EAP653 Wireless Access Point

TP-Link Omada EAP653

A standalone access point for a basement installation with Ethernet and an existing router.

Wi-Fi 6, a gigabit Ethernet port and PoE support. Wall and ceiling mounting are listed for this model.

View at Joybuy
TP-Link Deco X50-PoE (3-Pack)

TP-Link Deco X50-PoE (3-Pack)

A good fit if you want to use several mesh units and supply both data and power via Ethernet.

Wi-Fi 6 and two Ethernet ports per unit. TP-Link lists 802.3at and 802.3bt for PoE; 802.3af isn’t supported.

View at Joybuy
TP-Link Omada EAP613 Wireless Access Point

TP-Link Omada EAP613

A standalone access point for extending Wi-Fi coverage in the basement via a wired connection.

Wi-Fi 6 and gigabit Ethernet. The listed power options are 802.3at PoE, passive PoE or DC power; wall and ceiling mounting are also listed.

View at Joybuy

Frequently asked questions

Can I simply buy a more powerful router for upstairs?

Not based on the advertised range alone. First, test the connection where you’ll be presenting, as placement and obstacles make a difference. A wired Wi-Fi access point in the basement avoids having to send the connection wirelessly through the floor between units.

How can I add a Wi-Fi access point without replacing my existing router?

Choose a model with a suitable access point or LAN bridge mode, and follow the instructions for that exact model. TP-Link describes connecting Deco units by cable in access point mode; FRITZ! describes using LAN bridge mode behind routers from other brands.

Why doesn’t the screen appear when a guest wants to present?

Check the presentation technology and network setup. According to Google Streaming Help, casting from Chrome requires the computer and Google Cast receiver to be connected to the same Wi-Fi network. Also test in advance that the guest settings allow access to the receiver.

Can I use my own router in the Netherlands, and is Wi-Fi licence-exempt?

Yes. ACM ConsuWijzer confirms that you can choose your own router, provided it meets the applicable requirements; your provider must make the necessary connection settings available. According to the Rijksinspectie Digitale Infrastructuur, Wi-Fi can be used at home and in commercial buildings without a licence on the designated frequencies, as long as the conditions of use are met. Radio equipment sold on the Dutch market must meet the applicable EU requirements and carry a CE mark.

How can I tell whether a PoE access point will work with my existing equipment?

Check the PoE protocol required by the exact access point against your switch or injector, and make sure it supports both the data connection and power supply. For the Deco X50-PoE, TP-Link lists 802.3at and 802.3bt, but not 802.3af.