Who is this choice relevant to?

Gamer with a weak basement signal

You download games in a fixed spot in the basement and want to find out whether the limitation is your internet connection or your home network. ACM ConsuWijzer recommends checking your speed with an Ethernet cable close to the connection point.

Homeowner with a cable route

You can run an Ethernet cable to the basement and are looking for a mesh point that uses it to connect to the rest of your network. TP-Link explains Ethernet backhaul for compatible Deco models.

Homeowner without a cable route

You need to choose between a wireless mesh point that still gets usable reception and a powerline kit that works with the sockets you plan to use. The Consumers’ Association points out that mesh points need a usable connection to each other; powerline performance also depends on your electrical wiring.

What should you consider when choosing a mesh setup?

Mesh with Ethernet backhaul

Choose this if: you can run an Ethernet cable to a suitable spot in or near the basement, and your system supports Ethernet backhaul.

Bear in mind: you’ll need a suitable cable route and the right connection to your existing router. Mesh won’t increase the speed of your internet connection.

Wireless mesh

Choose this if: you can’t run a cable, but have an intermediate spot where an extra point can still get usable reception.

Bear in mind: a basement floor or other obstacles can also weaken the connection between mesh points. Test the spot you plan to use.

Mesh with powerline backhaul

Choose this if: running a cable isn’t practical and the wireless connection between floors is weak; test the kit with the sockets you plan to use.

Bear in mind: performance also depends on your electrical wiring and the powerline standard used.

Check your connection or setup first

Choose this step if: you’re not yet sure whether the limitation is your internet connection, your current setup or the signal reaching the basement.

Bear in mind: a speed test near the router can help you identify the cause, but it won’t automatically fix a separate coverage issue in the basement.

What to consider What should you check? Who is this most relevant to?
Connection to the basement Check whether Ethernet reaches the basement. If it doesn’t, test reception at an intermediate spot or try powerline with the sockets you plan to use. If I mainly need a reliable connection between my router and the basement, I want to know which option will work there. Around 36% of consumers prioritise this.
Cause of slow downloads Test the connection by cable at the connection point, then compare the result with the download spot in the basement. I want to find out first whether my internet connection or the link to the basement is limiting my downloads. Around 29% of consumers prioritise this diagnosis.
Where to place wireless points Test an intermediate spot with as few obstacles as possible, and check the connection there and in the basement. Without a practical cable route, I need to find a spot where a wireless point can still get reception. Around 21% of consumers focus on this placement option.
Kit and existing equipment Check the operating mode behind your router, the available ports and compatibility using the full model numbers. I want to choose a kit that works with my existing equipment and doesn’t require unnecessary extras. This is the main concern for around 14% of consumers.

What to watch out for when buying

  • Putting an extra point straight in the basement where reception is poor

    A wireless point needs a usable connection to another point. If the signal is already weak there, it won’t necessarily fix the connection to your gaming device.

    First, try an intermediate spot where the point gets good reception, then check the connection at your usual download spot.

    You may still need to try a different location or add another point.

  • Mistaking the AX3000 rating for the download speed on one device

    The rating for the Deco X50 combines the wireless bands; it doesn’t tell you what internet speed you’ll get on a single gaming device in the basement.

    Compare a wired speed test near the router with one at your download spot, and check the connection between the mesh points too.

  • Assuming all powerline mesh points work together

    According to TP-Link, the Deco PX50 uses a different powerline standard from the PX10, P9 and P7. Don’t assume they’ll all share the same powerline backhaul.

    Before adding to your setup, check the full model numbers and the type of backhaul supported by the points you’ve chosen.

  • Choosing based on the model name alone

    A product listing with the same model name may still leave questions about the kit variant or key connections.

    Before you buy, check the exact version, number of units and connections on the product page.

Relevant brands to consider

TP-Link

The Deco range includes mesh setups with Ethernet backhaul and models with powerline backhaul.

  • TP-Link lists three gigabit ports per unit for the Deco X50 and explains Ethernet backhaul for compatible Deco models.
  • According to TP-Link, the Deco PX50 doesn’t share powerline backhaul with the PX10, P9 or P7. Advertised speeds aren’t measurements taken in your basement.

ASUS

According to ASUS, the ZenWiFi XD5 is a mesh option with app management and Ethernet backhaul support.

  • ASUS describes Ethernet backhaul support for the XD5.
  • ASUS notes that certain 160MHz features may vary by country. The maximum combined Wi-Fi speed isn’t the same as the download speed you’ll get in the basement.

devolo

According to devolo, Magic 2 WiFi 6 next combines a connection over your electrical wiring with Wi-Fi in a room where a wireless link between floors is difficult.

  • devolo lists two adapters and free gigabit LAN ports for the starter kit.
  • According to devolo, usable performance also depends on interference and the quality of your electrical wiring. You’ll need to assess how it performs in your particular basement.

NETGEAR

The Orbi range includes models with a separate wireless connection between the router and satellite.

  • The NETGEAR datasheet for the RBK852 lists a dedicated tri-band wireless backhaul and Ethernet ports.
  • These specifications apply to the RBK852, not automatically to every Orbi kit. A separate wireless band doesn’t guarantee that the signal will pass through a basement floor effectively.

Joybuy product options

These product options are mesh systems for home use. Check that your chosen connection route and setup work at your usual download spot in the basement.

TP-Link Deco BE68 2-pack

TP-Link Deco BE68 2-pack

A two-unit mesh kit to compare if you want to place several points around your home.

Purchase link unavailable
TP-Link Deco X50 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50 3-pack

This three-unit mesh kit is an option if you want to explore different placement spots.

Wi-Fi 6; dual-band at 2,4 GHz and 5 GHz.

Purchase link unavailable
Huawei eKit OptiX FG630 AX3000 dual-band Wi-Fi 6 mesh router

Huawei eKit OptiX FG630 AX3000

This mesh router is an option to compare if you’re looking for a mesh setup for home use.

Dual-band Wi-Fi 6.

Purchase link unavailable
TP-Link Deco XE75 Pro 3-pack, tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro 3-pack

This three-unit mesh kit is an option to compare if you want to place several points around your home.

Tri-band Wi-Fi 6E at 2,4 GHz, 5 GHz and 6 GHz.

Purchase link unavailable
TP-Link Deco XE75 tri-band mesh Wi-Fi 6E

TP-Link Deco XE75

This mesh option is worth comparing if you’re looking for a wireless network with multiple frequency bands.

Tri-band Wi-Fi 6E at 2,4 GHz, 5 GHz and 6 GHz.

Purchase link unavailable

Frequently asked questions

How can you tell if mesh will help your game update download faster?

First, use an Ethernet cable close to your internet connection to check your speed, then compare the result with the connection in the basement. If the connection is also slow at the connection point, look into your internet service first; mesh won’t increase its speed. ACM ConsuWijzer explains how to carry out this wired check.

Where should you place an extra wireless point?

Place it somewhere the point itself can still get usable reception, and minimise obstacles between the points where possible. Then test the connection at your usual download spot in the basement; don’t rely only on the advertised coverage area.

When should you choose Ethernet backhaul or powerline?

Ethernet backhaul is a targeted option if you can run an Ethernet cable to a suitable spot and your system supports that connection. If running a cable isn’t practical, you can test a wireless intermediate point or powerline; powerline performance also depends on your electrical wiring.

Can you combine a Deco PX50 for powerline backhaul with older Deco points?

TP-Link lists different powerline standards for the PX50 and the PX10, P9 and P7, so don’t assume they’ll share the same powerline backhaul. Check the full model numbers before expanding your kit.

What should you check on a mesh device for use in the Netherlands?

Check that the specific version carries the applicable CE marking. According to the Dutch Authority for Digital Infrastructure, manufacturers apply this marking when radio equipment meets the relevant requirements.