Who is this choice relevant to?

Student with an ethernet connection in the basement

If you can connect an ethernet cable in your study space, you can compare wired backhaul with a separate access point. NETGEAR Support and TP-Link Netherlands describe wired connections between mesh nodes.

Student with no way to run an ethernet cable

If you can't run a cable, check whether a wireless node can still maintain a good connection to the main network, or whether a powerline connection through your home's electrical wiring will work. The Consumers' Association and manufacturers cover these placement and connection considerations.

Buyer who wants to identify the cause first

To avoid buying a new mesh system that doesn't address the real problem, compare the connection at the router with the one in the basement. The Consumers' Association recommends testing the speed over an ethernet cable.

What should you look for in mesh Wi-Fi for a basement room?

In practice, your choice mainly depends on the connection you can establish between the router and the basement.

Mesh with ethernet backhaul

Choose this option if: you already have a suitable ethernet connection, or can run a cable to the basement.

Consider: running a cable and choosing the right connection method require planning; also check whether a wired access point would be enough.

Fully wireless mesh

Choose this option if: you can place a node somewhere it can still maintain a usable wireless connection to the main network.

Consider: floors and other obstacles can weaken the connection between nodes; maximum coverage claims don't guarantee a signal in your basement.

Mesh with powerline backhaul

Choose this option if: running a cable isn't practical and the wireless connection through the floor proves unusable.

Consider: the connection also uses your home's electrical wiring, so performance depends on the electrical setup in your home.

Consideration What should you check? Who should give this more weight?
Connection to the basement Check support for ethernet backhaul, the cable route and where you could place a wireless node. If I need reliable Wi-Fi in my study space, I want to know whether the signal there can also reach the router. Around 36% of consumers put getting a connection all the way to the basement first.
A solution without a cable Compare a wireless node location with powerline, then test your chosen option where you intend to use it. If running a cable isn't practical, I want a solution that works in my home without installing new ethernet cabling. Around 29% of consumers prioritise a solution that doesn't require cabling.
Avoiding unnecessary purchases Compare a wired test at the router with the connection in your study space before choosing extra nodes. If the internet is slow even at the router, I want to know whether mesh will solve the problem before I buy. Around 21% of consumers prioritise diagnosing the issue and avoiding unnecessary spending.
Management and security Check how the system is managed, its security settings and updates, and any subscription terms for the exact model. If I use the network every day, I want to know how to manage it and which features are included. Around 14% of consumers see management and security as their main purchasing priorities.

Common purchasing mistakes

  • Putting a wireless node straight in the basement without checking the connection

    An extra node only helps if it can receive data from the main network. The Consumers' Association recommends positioning wireless nodes with as few obstacles between them as possible.

    Moving the node elsewhere or installing cabling after all may involve extra set-up work.

    Try a position between the router and the basement first, then check the connection there. If wireless doesn't work, compare ethernet or powerline backhaul.

  • Assuming a claimed Wi-Fi or powerline speed is the speed you'll get at your desk

    Actual performance depends on factors including your home, connected devices and network environment. A stated maximum therefore doesn't guarantee a good connection for using your study portal.

    Test the connection in your intended study space, and don't compare product claims directly with a test result as if they measured the same thing.

  • Overlooking paid features or an incompatible add-on

    Extra security features may have different terms from the basic package. Devolo also states that Magic adapters aren't compatible with adapters from the dLAN range.

    You may need a subscription for the features you want; an incompatible add-on could mean choosing different equipment.

    Check the terms for the features you want and the compatibility of add-ons with the exact model.

Brands to compare

TP-Link

The Deco X50 and Deco PX10 offer different ways to connect mesh nodes: ethernet backhaul or powerline.

  • TP-Link documents ethernet backhaul for the X50 and powerline backhaul for the PX10.
  • Claimed coverage or transfer speeds don't show how well the connection will work in a particular basement.

ASUS

ZenWiFi AX (XT8) is worth considering if you want to compare a tri-band mesh system with a wired set-up.

  • ASUS describes ethernet backhaul for a wired set-up.
  • The connection method requires suitable cables and a compatible switch; the stated coverage doesn't confirm that the signal will reach through your basement floor.

FRITZ!

The FRITZ!Mesh Set 1700 is worth comparing if you want to connect mesh to an existing router or modem.

  • FRITZ! describes installation and management through an app, and connection to an existing router.
  • Check how the nodes will connect to each other in your home; connecting to a router alone doesn't guarantee a usable connection to the basement.

NETGEAR

Nighthawk Mesh is worth considering if you want to explore different wired set-ups for the router and satellites.

  • NETGEAR documents ethernet backhaul for Nighthawk systems.
  • The number of ethernet ports and possible set-ups varies by model, so check the exact version.

devolo

Magic 2 WiFi next is a mesh and powerline option to compare if running an ethernet cable isn't practical.

  • devolo lists two gigabit LAN ports and the option to add adapters from the Magic range.
  • According to devolo, adapters from the dLAN range aren't supported; test the powerline connection in your own home.

Joybuy products for a basement study space

This Joybuy selection includes mesh systems with two or three units. For the exact model, check that it supports the wired connection you want and that it suits your home; also check that the device supplied carries the required CE marking.

TP-Link Deco BE68 2-pack mesh system

TP-Link Deco BE68 (2-pack)

A good fit if you're looking for a mesh system with two units and wired connection options; check which backhaul set-up suits your home.

Wi-Fi 7; tri-band; 10 Gbps, 2.5 Gbps and 1 Gbps ethernet ports.

The described set supports wireless and wired backhaul.

View at Joybuy
ASUS ZenWiFi BT8 2-pack tri-band Wi-Fi 7

ASUS ZenWiFi BT8 (2-pack), tri-band Wi-Fi 7

A good fit if you're comparing a two-unit mesh system with tri-band Wi-Fi; check the connections and compatibility with your existing network.

Tri-band with 2.4 GHz, 5 GHz and 6 GHz bands.

AiMesh compatibility is listed in the product information.

View at Joybuy
TP-Link AX1800 mesh Wi-Fi system with two Deco X20 units

TP-Link AX1800 mesh Wi-Fi system (2-pack)

A good fit if you're looking for a two-unit mesh system with the option of ethernet backhaul; check whether you can connect the units with an ethernet cable.

Wi-Fi 6; the described set contains two Deco X20 units.

Ethernet backhaul is listed in the product information.

View at Joybuy
TP-Link Deco X50 3-pack dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

A good fit if you want to compare a three-unit mesh system with the option of wired backhaul; check where you can place or connect the units.

Dual-band with 2.4 GHz and 5 GHz; Wi-Fi 6.

Three gigabit ports per unit. TP-Link describes ethernet backhaul for the Deco X50.

View at Joybuy
ASUS ZenWiFi BT10 2-pack tri-band Wi-Fi 7

ASUS ZenWiFi BT10 (2-pack), tri-band Wi-Fi 7

A good fit if you're comparing a two-unit mesh system with wired connection options; check which connections and set-up you need.

Tri-band with 2.4 GHz, 5 GHz and 6 GHz bands.

10 Gigabit Ethernet; the product information lists the option to add AiMesh units.

View at Joybuy

Frequently asked questions

Should you buy a mesh system straight away if your study portal is slow in the basement?

No. First, test your internet connection using a device connected by ethernet, then compare it with the connection in your study space. If the connection itself is slow, extra Wi-Fi coverage won't fix the cause. The Consumers' Association recommends a wired speed test.

Where should you place a wireless mesh node?

Place the node somewhere it can still get a good connection, with as few obstacles between the nodes as possible. Then check the connection in the basement. Don't place the node only where reception is worst without testing it first. The Consumers' Association gives similar placement advice.

What additional costs and rights should you consider when buying online?

Check whether the extra security features you want require a paid subscription, and whether you'll need to install cabling. According to the Dutch Government, online consumer purchases covered by Dutch regulations generally come with a 14-day cooling-off period. If a product is faulty, you can ask the seller to repair or replace it free of charge.

Do you need a licence for ordinary home Wi-Fi in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, no licence, notification or registration is required for Wi-Fi on the designated licence-exempt frequencies. The equipment must still meet the applicable requirements, so check that the device supplied carries the required CE marking.

What maintenance should you carry out after installation?

Keep your router and Wi-Fi nodes updated, use a strong password and check the security settings. The settings available vary by device.