For watching a nature documentary in the basement, wired mesh backhaul is a good option if you can run an Ethernet cable to a spot with a strong enough signal. Without a cable, the wireless node needs to receive a usable connection itself. First, test the connection by your modem and by your TV or streaming device: adding more mesh nodes won’t automatically fix a slow internet connection. For your own 4K streams, the Netflix Help Centre recommends a stable connection of at least 15 Mbps. This recommendation doesn’t necessarily apply to other services.
Who is this relevant for?
Basement viewer with a thick floor
Your film keeps buffering downstairs, even though the connection is better by the modem. If you can run an Ethernet cable, consider a wired Wi-Fi access point. The Dutch Consumers' Association recommends allowing for obstacles between access points.
Basement viewer without an Ethernet cable
You’re looking for a wireless spot for an extra node. According to the Dutch Consumers' Association, access points work best with as few obstacles between them as possible. So check that the extra node itself still has a connection at the chosen spot.
Viewer with an existing broadband modem
You want to keep your current router and find out how a mesh main node and any wired satellites will connect to it. TP-Link describes different connection options depending on the operating mode. FRITZ! says the FRITZ!Mesh Set 1700 can connect to an existing router via LAN.
What should you look for?
Mesh with Ethernet backhaul
Choose this if: you can run an Ethernet cable to a suitable spot in the basement and the wireless route through the floor is the weak link.
Bear in mind: you’ll need to run a cable and set up the network correctly. TP-Link lists Ethernet backhaul as an option for the Deco X50.
Wireless mesh with an intermediate node
Choose this if: running a cable isn’t possible and you can find a spot on the way to the basement where the intermediate node still gets a good connection.
Bear in mind: a node in a basement with virtually no signal won’t get a usable wireless connection. Test its position with the setup app or signal indicator.
Mesh over power lines
Choose this if: Wi-Fi struggles to pass between floors and there’s no Ethernet connection. TP-Link lists the Deco PX50 as a model that communicates over power lines.
Bear in mind: this feature isn’t available on every mesh system. How well it works over your particular electrical wiring depends on the setup in your home.
| What to consider |
What should you look for? |
Who should pay particular attention? |
| Connection to the basement |
Check whether Ethernet backhaul is possible, and test the connection by the modem too. A higher advertised Wi-Fi speed doesn’t in itself guarantee a stable stream in the basement. |
If the film keeps buffering downstairs, I want to know whether the route through the floor is the problem. Around 36% of consumers prioritise the basement connection when making this choice. |
| Positioning without a cable |
Check how many nodes are included in the set and test a spot where the extra node itself still gets a connection. The Dutch Consumers' Association recommends keeping obstacles between nodes to a minimum. |
If you don’t want to run an Ethernet cable, you’ll need to find a suitable spot for a wireless intermediate node. Around 29% of consumers prioritise cable-free positioning. |
| Existing equipment |
Check where the mesh main node connects, which operating mode is right for you and whether a port will remain available for your TV or streaming device. |
If I want to keep using my broadband modem and playback device, the connection needs to work with both. Around 21% of consumers prioritise keeping their existing equipment. |
| Cost and features |
Weigh up the number of nodes you need, any cable installation and any PoE power supply against the features you’ll actually use. If using PoE, also check the model’s required power standard. |
If you’d rather not pay for unused features or extra nodes, choose a set that suits your basement setup. Around 14% of consumers prioritise this trade-off. |
Common pitfalls
-
Putting a Wi-Fi node right in the basement dead zone
A wireless node needs its own connection to another node. In the spot with the weakest signal, that connection may not be available.
Try an intermediate spot first. If the wireless route through the floor isn’t usable, consider Ethernet backhaul.
You may still need an extra node, or you may have to run a cable to the basement.
-
Assuming the advertised speed or coverage guarantees a signal in your basement
Your actual setup and any obstacles make a difference. The Wi-Fi version alone doesn’t tell you everything about the connection where you watch.
Check the route between the nodes and test the connection by your TV or streaming device, rather than comparing packaging specifications alone.
-
Confusing Ethernet backhaul, PoE and powerline
These are different options, and they aren’t automatically available on every Deco model. For the Deco X50-PoE, TP-Link lists IEEE 802.3at and 802.3bt; IEEE 802.3af isn’t supported.
Check the full model number and the power supply you’ll need before planning your setup.
You may need a compatible power source for PoE.
Brands to compare
The product ranges listed differ in their connection options and set configurations, among other things. Always check the exact model and the number of units included.
TP-Link
The Deco X50 is a Wi-Fi 6 mesh system that offers Ethernet backhaul as an option. The X50-PoE and PX50 are different models, offering PoE-powered placement and communication over power lines respectively.
- TP-Link lists three gigabit ports on each standard Deco X50 unit.
- The power and backhaul options available on the X50-PoE and PX50 aren’t automatically available on the standard X50.
FRITZ!
According to the manufacturer, the FRITZ!Mesh Set 1700 can also be used with an existing router.
- FRITZ! describes connecting to a router or compatible fibre-optic modem via LAN.
- Check how many units are included in the exact set: a two-piece version isn’t the same purchase as a three-piece version.
ASUS
ZenWiFi BD4 is a dual-band Wi-Fi 7 mesh range.
- ASUS lists two 2.5-gigabit ports and a three-piece version.
- These specifications aren’t an independent test of basement coverage. Also check how many units are included in the set on offer.
Mesh systems on Joybuy
These mesh systems are designed for setups with multiple nodes, including situations where you may want to consider wired connections. Check the backhaul, ports and any power requirements for each model. Radio equipment must meet the applicable European requirements. According to the Dutch Authority for Digital Infrastructure, the manufacturer applies the CE mark when the device meets these requirements. So check the information for the exact version.
No image available
TP-Link Deco BE68 (2-pack)
A good fit for a setup with two mesh units, giving you the choice of wired or wireless backhaul.
The product description lists tri-band Wi-Fi 7 and Ethernet ports.
View at Joybuy
No image available
TP-Link Deco E4 (3-pack)
Worth comparing if you’re looking for a mesh set with three nodes and want to connect devices by cable.
The product description lists dual-band Wi-Fi 5 and two Ethernet ports per unit, each with a maximum speed of 100 Mbps.
View at Joybuy
No image available
TP-Link Deco X50 (3-pack)
A good fit for a mesh setup where you’re considering Ethernet backhaul; TP-Link lists it as an option for this model.
The set includes three Wi-Fi 6 units, each with three gigabit ports according to TP-Link.
View at Joybuy
No image available
Linksys Velop Pro 7 (2 nodes)
An option to compare if you’re looking for a mesh set with two nodes and Ethernet ports.
The product description lists tri-band Wi-Fi 7 and the option to expand with compatible Linksys Cognitive Mesh devices.
View at Joybuy
No image available
TP-Link Deco X50-PoE (2-pack)
A good fit for a mesh setup where you’re looking into Ethernet-powered devices; check that your power source is compatible.
The set includes two Wi-Fi 6 units with PoE and two Ethernet ports per unit. TP-Link lists IEEE 802.3at and 802.3bt as supported standards; IEEE 802.3af isn’t supported.
View at Joybuy
Frequently asked questions
Where should you put an extra wireless Wi-Fi node?
Put it somewhere the node itself still has a connection to the network, rather than automatically placing it where the signal is weakest. The Dutch Consumers' Association recommends keeping obstacles between nodes to a minimum and suggests placing a node halfway along the route if the signal is weak further away.
Can a Deco satellite connect to any port on your broadband modem?
No, the connection depends on the operating mode. For router mode, TP-Link describes connecting via the LAN side of the main Deco. In access point mode, the manufacturer says a satellite can also connect by cable to the main modem or router.
Is a mesh Wi-Fi model automatically suitable for sale in the Netherlands?
The model name or Wi-Fi standard alone doesn’t show that a specific version meets the applicable requirements. The Dutch Authority for Digital Infrastructure says the manufacturer applies the CE mark when radio equipment meets the relevant requirements. Check the information for the exact version.