First, measure your upload speed using a computer connected directly to your router with an Ethernet cable: mesh can't make a slow internet connection faster. If the Wi-Fi signal in your basement is the main issue, choose a practical way to connect the mesh points. Ethernet backhaul is an option if you can run a cable, while wireless mesh or powerline may work depending on the conditions in your home. Also check how the system connects to your existing router and whether the exact model meets the applicable requirements.
Who is this for?
Uploaders who want to find the cause first
If your portfolio uploads slowly and you're unsure whether your internet connection or the Wi-Fi signal to the basement is the bottleneck, test with an Ethernet cable before buying any equipment. The Consumers' Association (Consumentenbond) recommends running a speed test on a computer connected to your home network by cable.
Basement users who can run a cable
If you can run an Ethernet cable to the basement and also want Wi-Fi for other devices there, how the router connects to the mesh point in the basement is an important consideration. TP-Link describes Ethernet backhaul for Deco mesh points.
Basement users who can't run a cable
If running a cable isn't an option, check whether a mesh point in an intermediate location can still get a usable wireless connection. If floors interfere with the signal, you could also check whether a powerline setup works with the sockets you plan to use.
What should you look for?
First, test your internet connection, then decide how the mesh points should communicate with each other: by cable, wirelessly or over your electrical wiring using powerline.
| Concern |
What to look for when buying |
Who is this important for? |
| Where is the upload slowing down? |
Test by cable at the router, then compare the result with a test in the basement. The Consumers' Association recommends a wired connection for a speed test. |
If I don't know whether my provider's connection or the Wi-Fi signal to the basement is slowing down my upload, I want to identify the cause before buying equipment. Around 33% of consumers prioritise finding the cause. |
| Wired connection between mesh points |
Check whether you can run an Ethernet cable to the basement and whether the exact system has the Ethernet ports you need. TP-Link describes Ethernet backhaul for Deco. |
If I can run a cable to my workspace, I want to know whether I can also use it to connect the mesh points. Around 27% of consumers prioritise a wired connection. |
| Wireless intermediate location |
Look for a spot with as few obstacles as possible where the point can still connect to the previous one. Then measure the upload speed at your workspace. |
If I can't run a cable but there's a spot where an additional point can still get a signal, I want to know whether wireless mesh will work there. Around 20% of consumers focus on finding a suitable intermediate location for a wireless point. |
| Powerline as an alternative |
Check whether the connection works through the sockets you plan to use. Don't treat advertised range and data speeds as a guarantee of upload speed in your basement. |
If running a cable isn't possible and the wireless signal through the floor isn't usable, I want to explore powerline as an alternative. Around 20% of consumers prioritise this option. |
Common purchasing mistakes
-
Buying a mesh system before testing your wired upload speed
Your provider's connection could also be the cause of a slow upload. An extra Wi-Fi point won't change the capacity of that connection.
First, test with a computer connected to the router by Ethernet cable, then compare the result with a test in the basement.
-
Putting a wireless point somewhere with no signal
The extra point also needs a usable connection to the rest of your network.
Find an intermediate spot with as few obstacles as possible. The Consumers' Association recommends positioning Wi-Fi points so they can reach each other.
-
Assuming the advertised Wi-Fi or powerline speed guarantees a certain upload speed
Upload speed also depends on your internet connection and the connection between the mesh points. A product's advertised claims won't necessarily predict performance at your basement workspace.
First choose a practical backhaul option, then measure your upload speed where you work.
-
Connecting a system without deciding how to use your existing router
How you connect the system depends on which device handles the router functions. TP-Link describes different connection options for router mode and access point mode.
Before installation, decide which setup you'll use and follow the relevant connection diagram.
An incorrect connection could mean extra time spent setting up your network again.
Brands to consider
TP-Link
The Deco models mentioned offer different options for connecting mesh points.
- According to TP-Link, Deco X50 supports Ethernet backhaul, while Deco PX50 combines Wi-Fi with G.hn powerline technology.
- The connection options and ports vary by model. Manufacturer figures for Wi-Fi and coverage aren't measurements of your basement room.
ASUS
ASUS describes ZenWiFi BD4 as a dual-band Wi-Fi 7 mesh system with wired backhaul options.
- According to ASUS, the BD4 has two 2.5G Ethernet ports.
- Those ports are only useful if the other equipment in your wired connection can make use of them. The Wi-Fi 7 label doesn't prove that a weak signal through a basement floor will be fixed.
FRITZ!
FRITZ! describes the Mesh Set 1700 as suitable for use with a FRITZ!Box or a router from another brand.
- According to FRITZ!, the repeaters can connect to the FRITZ!Box over Wi-Fi or LAN.
- The right installation depends on which router you use as the mesh hub, so check the connection options for your setup.
Joybuy products
These Joybuy products are mesh systems or mesh routers designed to provide Wi-Fi in multiple locations. Whether they're suitable for a basement workspace also depends on your internet connection and how the mesh points connect to each other.
No image available
TP-Link Deco E4 (3-pack)
A three-unit system designed to provide Wi-Fi in multiple locations. Check first that the connection between the units will meet your upload needs.
The product name specifies dual-band Wi-Fi 5 on 2.4 and 5 GHz. The product description lists Ethernet ports with a maximum speed of 100 Mbps.
View at Joybuy
No image available
TP-Link Deco X50 (3-pack)
A three-unit system designed to provide Wi-Fi in multiple locations. Ethernet backhaul is worth considering if you can run a cable to a mesh point.
The product name specifies dual-band Wi-Fi 6. TP-Link lists three gigabit ports for the Deco X50 and describes Ethernet backhaul for Deco. The upload speed you can achieve in the basement also depends on your internet connection and setup.
View at Joybuy
No image available
Huawei eKit OptiX FG630 AX3000
A mesh router for a multi-location Wi-Fi setup. Check which additional units and connections your planned setup requires.
The product name specifies dual-band Wi-Fi 6 and AX3000. These labels alone don't indicate the upload performance you can expect in a basement room.
View at Joybuy
No image available
TP-Link Deco XE75 Pro (3-pack)
A three-unit system designed to provide Wi-Fi in multiple locations. Once it's set up, measure the upload speed at your workspace rather than relying on the advertised coverage.
The product name specifies tri-band Wi-Fi 6E on 2.4, 5 and 6 GHz.
View at Joybuy
No image available
TP-Link Deco XE75 (3-pack)
A three-unit system designed to provide Wi-Fi in multiple locations. The actual upload speed in your basement depends on your internet connection and how you choose to connect the mesh points.
The product name specifies tri-band Wi-Fi 6E on 2.4, 5 and 6 GHz.
View at Joybuy
Frequently asked questions
Should you upgrade your broadband package if uploads are slow from the basement?
Not until you've tested the connection. Run several tests on a computer connected to the router by Ethernet cable, then compare the results with the speeds promised by your provider. A mesh point can't overcome a limitation in that connection.
Can a Deco system work with your existing router from your internet provider?
Yes. TP-Link describes both router mode and access point mode. If your existing router will continue to manage the network, TP-Link generally recommends access point mode. Follow the connection diagram for your chosen mode to avoid creating a network loop.
Where should you place a wireless mesh point?
Place it somewhere it can still get a usable connection to the previous point, with as few obstacles as possible. Then measure the upload speed at your basement workspace: seeing a Wi-Fi signal doesn't tell you how fast uploads will be there.
Are you automatically entitled to only two years of legal cover in the Netherlands?
No. According to ACM ConsuWijzer, a product should work properly for as long as you could reasonably expect it to. If a product is faulty, the seller is responsible for providing an appropriate remedy free of charge. Any manufacturer's warranty is separate from this.
What requirements apply to mesh Wi-Fi equipment sold in the Netherlands?
Radio equipment must meet the applicable requirements of the Radio Equipment Directive, and compliant products must carry a CE mark. According to the Dutch Authority for Digital Infrastructure, applicable cybersecurity requirements under RED 3.3 have also applied since 1 August 2025. Check the exact model: a product listing alone doesn't confirm that an individual item on sale meets all applicable requirements.