First, use a network cable to measure your upload speed near your internet connection, then compare it with the speed at your workspace. ACM ConsuWijzer recommends taking a wired measurement as close as possible to the connection point. Mesh can improve weak Wi-Fi coverage, but it cannot fix a slow internet uplink. If you can run a cable to the basement, mesh with Ethernet backhaul is a targeted option. Without a cable, the result depends on the wireless connection between the mesh points and where you place them.
Who might need mesh Wi-Fi in a basement?
Designer with weak basement Wi-Fi
Your internet connection may be fast enough, but Wi-Fi at your workspace keeps slowing down. First, work out whether the connection to the basement is the bottleneck; ACM ConsuWijzer recommends a wired speed test near the connection point.
Home worker with several basement devices
You want to connect other devices downstairs as well as your design computer. So consider where to place the mesh points and how many ports you need at your chosen locations.
Uploader with a potentially slow internet uplink
You want to find out whether your internet plan, rather than Wi-Fi, is limiting your upload speed. Compare a wired test at the connection point with a test at your workspace.
What should you look for in mesh Wi-Fi for a basement?
For uploading design files from the basement, both your internet uplink and the connection between floors matter. Choose a solution based on the route you can actually install and use.
Mesh with Ethernet backhaul
Best suited to: situations where a usable network cable reaches or is near the basement.
Consider: the cable route, ports and network mode must all be suitable for the model you choose.
Wireless mesh
Best suited to: situations where running a cable is impractical and a mesh point in between floors can still connect to the main network.
Consider: placement affects the connection; NETGEAR Support explains that shared Wi-Fi bands can limit performance.
Wired computer or access point
Best suited to: situations where just one fixed design workspace needs a reliable connection, or a cable is already in place.
Consider: a wired computer will not automatically provide Wi-Fi coverage for other devices in the basement.
Powerline with Wi-Fi
Best suited to: situations where running a network cable is not feasible and the wireless connection between floors is inadequate.
Consider: devolo describes powerline products for this type of connection, but that does not prove what upload speed your electrical installation can deliver.
| What to consider |
What should you check? |
Who is this important for? |
| Connection to the basement |
Check whether your chosen model supports Ethernet backhaul and where a wireless point in between floors can still connect to the main network. |
If I upload design files downstairs, I want to know whether the connection reaches the basement before choosing a set. Around 40% of consumers prioritise the connection to the basement. |
| Actual upload speed |
Compare wired tests near the connection point with tests at your workspace and the upload speed included in your internet plan. |
I want to find out first whether my internet connection itself is limiting upload speeds. Around 30% of consumers prioritise this check. |
| Ports and installation |
Check what is included in the set, its network mode and the ports available on the points you want to connect. |
For my basement setup, I want to know in advance whether the points and connections are suitable. Around 20% of consumers prioritise an installation they can put into practice. |
| Mesh points and energy use |
Work out how many points you need and bear in mind that they will remain switched on all the time. |
I don't want to use more points than my workspace needs, and I also consider equipment that stays on continuously. Around 10% of consumers prioritise the number of points and energy use. |
Common buying mistakes
-
Confusing a high Wi-Fi speed with your internet speed
Your internet uplink speed and the Wi-Fi connection at your workspace are separate links in the chain. A better local Wi-Fi connection will not increase a slow uplink.
First, take a wired measurement near the connection point and compare the result with a measurement at your basement workspace.
-
Placing a wireless mesh point where the signal is already weak
A satellite point also needs a connection to the main router. If there is no usable signal where you place it, adding another point will not solve the problem on its own.
Consider placing a point in between, or use Ethernet backhaul if a suitable cable route is possible.
-
Confusing an expansion point or a different pack size with a complete set
The contents of the set determine the setup you can create. For example, a different pack size may not include the same combination of main unit and points.
Before buying, compare the full model name, pack size and ports of the specific version.
Brands to compare
TP-Link
Deco mesh for comparing wired backhaul and the number of connection ports.
- According to TP-Link, the Deco X55 has three gigabit ports and supports Ethernet backhaul.
- The stated maximum coverage does not prove what range you will get in a basement. Also check the connection instructions for the network mode of your chosen model.
ASUS
AiMesh and ZenWiFi systems for those considering a configurable wired setup.
- ASUS describes Ethernet backhaul and separate router and access point scenarios.
- When using a switch, port configuration and connection priority are important considerations. Check support for the exact model.
NETGEAR
Orbi and Nighthawk Mesh systems for comparing wireless and wired backhaul.
- NETGEAR Support explains that some systems use a dedicated wireless backhaul band.
- According to NETGEAR Support, shared Wi-Fi bands can limit performance; this is not an independent test of a basement setup. Support varies by system.
FRITZ!
Mesh sets for connecting several points to an existing router or modem.
- FRITZ! describes the Mesh Set 1700 as a set with three repeaters for connecting to a router or existing modem.
- Check that the specific version supports your preferred wired setup and has enough free ports.
devolo
Mesh sets and powerline products with Wi-Fi for those also considering a connection through the electrical wiring.
- devolo describes both mesh sets and powerline kits with Wi-Fi.
- Product information about coverage in a basement does not prove what upload speed your electrical installation can deliver.
Mesh Wi-Fi for your basement workspace
These product picks are mesh systems for a basement workspace. For the exact version, check the CE marking and the Dutch rules for using Wi-Fi; RDI describes the applicable product and usage rules.
Image unavailable
TP-Link Deco BE68 (2-pack)
An option to compare if you want to use Ethernet backhaul and connect wired devices too.
Wi-Fi 7 mesh system with two units; supports wired and wireless backhaul. Each unit is listed with three WAN/LAN ports: 10 Gbps, 2,5 Gbps and 1 Gbps.
View on Joybuy
Image unavailable
TP-Link Deco E4 (3-pack), dual-band Wi-Fi 5
A 3-pack to compare if you need several mesh points.
Dual-band Wi-Fi 5 (2,4 GHz and 5 GHz); each unit is listed with two network ports with a maximum speed of 100 Mbps. This port speed limits wired connections through these ports.
View on Joybuy
Image unavailable
ASUS ZenWiFi BT8 (2-pack), tri-band Wi-Fi 7
An option to compare if you want to expand a mesh setup with compatible ASUS routers.
Tri-band Wi-Fi 7 (2,4 GHz, 5 GHz and 6 GHz); the product description lists AiMesh integration with compatible ASUS routers.
View on Joybuy
Image unavailable
ASUS ZenWiFi BD4, dual-band Wi-Fi 7
An option to compare if you want to use wired backhaul and wired connections.
Wi-Fi 7; supports wired backhaul and has two 2,5-Gbps Ethernet ports.
View on Joybuy
Image unavailable
TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6
An option to compare if you are considering a set with several points and Ethernet backhaul.
Dual-band Wi-Fi 6 (2,4 GHz and 5 GHz); each unit is listed with three gigabit ports. Ethernet backhaul is optional.
View on Joybuy
Frequently asked questions
Should you buy mesh if your upload speed is slow?
Not until you have checked your internet uplink. ACM ConsuWijzer recommends connecting a computer to the network with a cable, as close as possible to the connection point. Then compare that measurement with the speed in your basement.
Where should you place a wireless mesh point for the basement?
Don't place the point somewhere it cannot get a usable connection to the main router. Consider a position in between; if that doesn't work, look at running a cable or connecting a computer directly by cable.
Which product rule should you check when buying in the Netherlands?
The Dutch Authority for Digital Infrastructure states that only products with a CE marking may be sold in Europe. Check the marking on the exact version; a claim for a different model does not confirm the version you are buying.
Do you need a permit or registration to use Wi-Fi at home?
Wi-Fi can be used without a permit on the designated frequencies and in accordance with the usage conditions. The Dutch Authority for Digital Infrastructure also states that permit-free use of frequencies does not require notification or registration; the usage conditions still apply.
How can you check whether your Deco point is using Ethernet backhaul?
According to TP-Link, you can check in the Deco app whether a satellite is using Ethernet backhaul. Also follow the connection instructions for the selected router or access point mode.