Who is this relevant for?

Student with weak basement Wi-Fi

Wants to be able to speak and follow along from the same spot during an online lesson. First, work out whether the Wi-Fi connection downstairs is the main problem.

Household without a cable to the basement

Is looking for a wireless solution and can place a midway unit somewhere the existing network is still reachable.

Household with a network cable downstairs

Wants to weigh up whether to connect a laptop directly to the cable or use a wired Wi-Fi access point for several devices.

What should you look for?

First, check that the internet connection at the router is working properly and whether you can run a cable to the basement. Then choose between a direct cable, a wired Wi-Fi access point and wireless mesh.

Connect your laptop directly via Ethernet

Choose this if: you can run a cable to your study area and only the laptop needs a connection.

Bear in mind: this connection won’t automatically provide Wi-Fi for phones or other devices in the basement.

Wired Wi-Fi access point or mesh

Choose this if: you can run a cable downstairs and several devices need Wi-Fi there.

Bear in mind: check which type of backhaul the system supports and how many Ethernet ports will be free once it’s connected.

Wireless mesh

Choose this if: running a cable isn’t possible and you can find a midway spot where a mesh unit can still connect to the network.

Bear in mind: a unit placed somewhere without a usable signal won’t automatically get a good connection through the floor.

Check the router or internet connection first

Choose this step if: a wired connection test at the router is also disappointing.

Bear in mind: mesh won’t fix a problem that occurs before the Wi-Fi units.

What to consider What should you check? Who is this important for?
Connection to your study area Check whether you can run a cable to the basement. If you’re considering mesh, also check whether the exact system supports Ethernet backhaul and whether there’ll be a port left for a wired device. If my main concern is preventing video or audio dropouts during lessons, I look at the connection in the spot where I’ll be studying. Around 36% of consumers prioritise a reliable connection downstairs.
Positioning without a cable Try out potential midway spots and check how many units are included in the set. Don’t treat a coverage claim as a guarantee of reception in the basement. If I can’t run a cable, I look for a spot where a wireless unit can still reach the existing network. Around 29% of consumers pay most attention to where they can position a unit.
Connecting to your existing router Check which unit needs a wired connection to the router, which mode you’ll use and which features will still be available. If I want to keep using my provider’s router, I want to know how the new equipment will connect to it. Around 21% of consumers focus mainly on getting the network setup to work with their existing equipment.
Capacity you need Compare how many units you need and how many LAN ports will be free. Then check whether the Wi-Fi standard suits the capabilities of your study device. If I don’t want to buy a larger set than my situation calls for, I first compare what my study area and other devices need. Around 14% of consumers focus mainly on cost and the capacity they need.

Common buying mistakes

  • Placing a mesh unit where there’s no Wi-Fi

    The unit needs a connection to the network itself. Walls and ceilings can weaken the signal.

    Try a spot between the router and the basement where the network is still reachable, or consider wired backhaul if you can run a cable.

  • Buying mesh to fix a poor internet connection

    A mesh set won’t fix a problem that already exists with the internet connection before it reaches the Wi-Fi units.

    First, test the connection at the router using a cable. If the problem persists there, discuss it with your provider.

  • Treating a main Deco unit as a wireless repeater

    According to TP-Link, the main Deco must be connected to the existing router, modem or internet connection using an Ethernet cable; Deco doesn’t work as a wireless repeater for that router.

    Before you buy, check how you’ll run the cable to the main unit and which network mode suits your setup.

  • Assuming the stated coverage guarantees basement reception

    The stated area doesn’t predict how well the signal will travel through a particular floor or reach a fixed study area.

    Assess the positioning and connection between the units in your own home, rather than relying only on the number of square metres on the box.

Brands to consider

TP-Link

The Deco X50 3-pack is worth considering if you need several mesh units and connections for backhaul and devices.

  • The Consumentenbond lists Wi-Fi 6, Ethernet backhaul and three gigabit ports per unit for the Deco X50 3-pack.
  • These are model specifications, not measured performance in a basement. According to TP-Link, the main Deco must be connected to the router or internet connection via Ethernet.

ASUS

The ZenWiFi XD5 is a mesh range to consider if you’re looking at multiple Wi-Fi units and Ethernet backhaul.

  • For the white XD5 3-pack tested, hardware version A1, the Consumentenbond lists Wi-Fi 6, Ethernet backhaul and two ports.
  • ASUS Netherlands states a coverage area of 445 m² for three units, while the Joybuy listing gives 550 m². Neither figure guarantees a signal through the floor to a basement.

FRITZ!

The FRITZ!Repeater 1200 AX is worth considering if you already use a compatible FRITZ!Box and want to connect an additional Wi-Fi unit via LAN.

  • According to FRITZ!, when used with a FRITZ!Box running FRITZ!OS 7 or later, the repeater becomes part of the mesh network via a LAN bridge.
  • Don’t assume it will integrate in the same way with a router from another brand.

NETGEAR

Orbi is an option to compare if you’re considering a separate router-and-satellite setup and its backhaul.

  • NETGEAR describes Ethernet backhaul for Orbi systems.
  • NETGEAR’s setup instructions aren’t a basement test and don’t confirm which version is included in a particular shop listing.

Mesh products at Joybuy

These products are mesh Wi-Fi systems for situations where you’re considering several Wi-Fi units or a wired access point. Before buying a specific product, check the information about the EU version being offered and the relevant product requirements. A model name alone doesn’t tell you which version will be supplied.

TP-Link Deco BE68 2-Pack

TP-Link Deco BE68 2-Pack

Suitable if you’re looking for a mesh set with two units and want to consider wired or wireless backhaul.

Set of 2 units. The product information lists three ports per unit: 10 Gbps, 2,5 Gbps and 1 Gbps.

View at Joybuy
ASUS ZenWiFi BT8 2-Pack Tri-Band Wi-Fi 7

ASUS ZenWiFi BT8 (2-Pack) Tri-Band Wi-Fi 7

Suitable if you’re looking for a mesh set with two units and can connect the main unit to your modem via Ethernet.

The product name lists tri-band Wi-Fi, 2,4 GHz, 5 GHz and 6 GHz, and Wi-Fi 7.

View at Joybuy
ASUS ZenWiFi BD4 Dual-Band Wi-Fi 7

ASUS ZenWiFi BD4 Dual-Band Wi-Fi 7

Suitable if you’re considering a mesh system with the option of wired backhaul.

The product name lists dual-band Wi-Fi on 2,4 GHz and 5 GHz, and Wi-Fi 7.

View at Joybuy
TP-Link Deco M4 3-Pack Dual-Band Wi-Fi 5

TP-Link Deco M4 (3-Pack) Dual-Band Wi-Fi 5

Suitable if you’re looking for a set with three mesh units that you can manage using the Deco app.

The product name lists dual-band Wi-Fi on 2,4 GHz and 5 GHz, and Wi-Fi 5. According to TP-Link, the main Deco must be connected to the existing router or internet connection via Ethernet; the system doesn’t work as a wireless repeater for that router.

View at Joybuy
TP-Link Deco X50 3-Pack Dual-Band Wi-Fi 6

TP-Link Deco X50 (3-Pack) Dual-Band Wi-Fi 6

Suitable if you’re considering three mesh units and Ethernet backhaul, for example to set up a wired Wi-Fi access point downstairs.

The product name lists dual-band Wi-Fi on 2,4 GHz and 5 GHz, and Wi-Fi 6. The Consumentenbond lists three gigabit ports per unit and Ethernet backhaul. According to TP-Link, the main Deco must be connected to the existing router or internet connection via Ethernet.

View at Joybuy

Frequently asked questions

How can you test whether mesh will fix a patchy online lesson?

First, test the connection at the router using a network cable. If it’s poor there too, investigate the internet connection or contact your provider. If the connection is weak mainly in the basement, look at the Wi-Fi coverage and the route downstairs.

Can a main Deco unit wirelessly take over the Wi-Fi from your existing router?

No. According to TP-Link, the main Deco must be connected to a router, modem or internet connection via Ethernet. Satellites can then connect wirelessly within the Deco network.

What internet speed do you need for a Zoom lesson?

It depends on the lesson settings. Zoom recommends 2,6 Mbps upload and 1,8 Mbps download for 720p group video. These figures don’t automatically apply to every lesson service, and they don’t guarantee that an unstable Wi-Fi connection will work well.

What can you do if the basement connection keeps dropping after installation?

Compare the wired connection at the router with the one in your study area, and try placing the wireless unit somewhere the network is more accessible. If you can run a cable downstairs, you could also consider a wired connection or a wired Wi-Fi access point.

What are your rights when buying mesh Wi-Fi online in the Netherlands?

For online consumer purchases from a business, you’re usually entitled to a 14-day cooling-off period; the seller must tell you about this. If a product breaks sooner than you could reasonably expect, your statutory guarantee rights may entitle you to a free repair or replacement. The Dutch government (Rijksoverheid) and the Consumentenbond distinguish between the cooling-off period and your rights when a product is faulty.

What should you check about the EU version of a mesh Wi-Fi unit?

Check the product information for the version being offered, rather than relying on the model name alone. The Dutch Authority for Digital Infrastructure (Rijksinspectie Digitale Infrastructuur) explains the relevant European requirements for radio equipment; applicable cybersecurity requirements have also been in force since 1 August 2025.