Who is mesh Wi-Fi in the basement suitable for?

A basement with a thick floor

You attend lectures behind a floor or walls that can interfere with the wireless signal between floors. So first, find out whether you can run a cable to the basement. The Dutch Consumers’ Association advises keeping obstacles between Wi-Fi points to a minimum.

A basement with no cable route

You need to connect the mesh points wirelessly and find an intermediate spot where the extra point can still get a good signal from the network. The Dutch Consumers’ Association points out that placement and obstacles matter.

Using an ISP router

You want to keep your existing router and know in advance how the main mesh point will connect and be managed. Check the connection options and modes for the exact system.

What should you look for in mesh Wi-Fi for the basement?

Start by checking whether the problem only occurs in the basement. This helps you avoid choosing mesh if the dropouts are caused by something else.

Mesh with wired backhaul

Choose this if: you can run an Ethernet cable to or near the basement.

Bear in mind: the cable route and the Ethernet ports you’ll still need after connecting everything.

Fully wireless mesh

Choose this if: running a cable isn’t practical and you can find an intermediate spot where the mesh point still gets a good connection.

Bear in mind: distance and obstacles will still affect the wireless connection.

Check your existing connection first

Choose this if: the connection also drops out near the router or in other areas.

Bear in mind: this can help you identify the cause, but it won’t improve Wi-Fi coverage in the basement by itself.

Concern What to look for when buying Who is this important for?
Getting a connection through the basement floor Check whether the exact system supports Ethernet backhaul, and whether the cable route and ports will work with your setup. If I attend lectures behind a particularly challenging floor, I want to know whether a cable can carry the connection between the points. Around 36% of consumers put a reliable connection through the basement floor first.
Placement without a cable Test the connection where you plan to place each point. Don’t put a wireless point in an area without a usable signal until you’ve tested it. When running a cable isn’t an option, I look for an intermediate spot where a wireless point can still reach the network. Around 29% of consumers give this workable wireless setup top priority.
Cause of the dropouts Compare the connection in the basement with one near the router and, if possible, with a wired connection. If the live lecture also drops out elsewhere, I want to rule out a problem unrelated to the basement Wi-Fi first. Around 21% of consumers are most keen to avoid buying mesh to fix the wrong problem.
Connection and system size Check how the system connects to your ISP router, how many units are included and the conditions for any optional features. I want to keep using my existing equipment and know in advance how many points my setup needs. Around 14% of consumers prioritise the connection and what’s included in the system.

Common pitfalls

  • Putting an extra point straight in the dead zone

    A wireless mesh point needs to connect to the rest of the network itself. So if you place it where reception is at its worst, it may not be able to pick up the incoming signal it needs.

    First, test an intermediate spot with fewer obstacles, then check reception where you attend the lecture. If you can run a cable, also compare a system with Ethernet backhaul.

    Depending on your setup, you may still need an extra point or a cable.

  • Assuming stated Wi-Fi speed or coverage guarantees a signal in the basement

    TP-Link states that the actual throughput and coverage of the Deco X50 vary depending on factors such as building materials and obstacles. So the stated figures don’t tell you exactly how well the connection will work in your basement.

    First, work out how the mesh points can connect to each other, then test your planned setup at home.

  • Overlooking the system size or the version supplied

    A two-point system is a different purchase from a three-point one. Check the full model name and the number of units to make sure the system you choose suits your setup.

    The Dutch Authority for Digital Infrastructure states that equipment must carry the correct CE marking. Check this for the exact version being supplied; seeing a model name on a product page isn’t enough to confirm it.

Relevant brands to consider

TP-Link

The Deco X50 is worth comparing if you’re looking for Ethernet backhaul and multiple ports on each point.

  • TP-Link specifies three gigabit ports per unit and optional Ethernet backhaul for the Deco X50.
  • TP-Link warns that actual throughput and coverage depend on factors including network conditions and building obstacles. Also check the system size and version.

FRITZ!

The Mesh Set 1700 is worth considering if you want to keep your existing router and are thinking of connecting the points by cable.

  • FRITZ! explains how to connect the Mesh Set 1700 to another router; the Repeater 1700 has one gigabit LAN port.
  • Check how many wired devices you want to connect and whether you’re looking at a two- or three-piece system.

ASUS

The ZenWiFi BD4 is worth comparing if you want to look at AiMesh expansion and wired connections.

  • ASUS specifies two 2.5-gigabit ports and a wired backhaul option for the BD4.
  • Check the exact system size and regional version. A manufacturer’s coverage claim doesn’t tell you how well reception will work in a particular basement.

NETGEAR

The Orbi RBK763S is worth considering if you can’t run a cable between the points.

  • NETGEAR describes the RBK763S as having a separate wireless backhaul between the router and satellites.
  • That wireless connection still needs to reach through the obstacles in your home. This feature applies to the RBK763S and not automatically to every Orbi model.

Joybuy mesh Wi-Fi picks

These Joybuy picks are selected for mesh Wi-Fi in a basement setup. Compare the number of points and check that the features of the exact version suit the connection you want between them.

TP-Link Deco BE68 mesh system, 2-pack

TP-Link Deco BE68 (2-pack)

A two-point system to compare if you want to use several mesh points to reach the basement.

Check that the wired or wireless backhaul options suit your cable route and planned placement.

View at Joybuy
TP-Link Deco E4 mesh system, 3-pack

TP-Link Deco E4 (3-pack)

This three-piece system is an option to compare if you want to place several points around your home.

Dual-band (2,4 GHz / 5 GHz), Wi-Fi 5 (802.11ac) and Ethernet ports with a maximum speed of 100 Mbps per port.

View at Joybuy
ASUS ZenWiFi BT8 mesh system, 2-pack

ASUS ZenWiFi BT8 (2-pack)

A two-point system to compare if you’re putting together a mesh setup for the basement.

Tri-band (2,4 GHz / 5 GHz / 6 GHz), Wi-Fi 7 (802.11be).

View at Joybuy
TP-Link AX1800 mesh Wi-Fi system, 2-pack

TP-Link AX1800 mesh Wi-Fi system (2-pack)

A two-piece system to compare if you need several mesh points.

Wi-Fi 6; check the connection options for your setup and whether it supports the connection you want between the points.

View at Joybuy
TP-Link Deco X50 mesh system, 3-pack

TP-Link Deco X50 (3-pack)

A three-piece system to compare if you need several points and are considering a wired connection.

Dual-band (2,4 GHz / 5 GHz), Wi-Fi 6 (802.11ax); check whether the exact version supports Ethernet backhaul.

View at Joybuy

Frequently asked questions

Where should you put a wireless mesh point if the basement has very little coverage?

First, try an intermediate spot with fewer obstacles where the point can still get a usable connection. Then check reception where you attend the lecture. Don’t put a wireless point in the hardest-to-reach area without testing it first.

Do you need to replace your ISP router?

Not with every system. Check the connection instructions and modes for the exact model: FRITZ! explains how to connect the Mesh Set 1700 to an existing router, while TP-Link lists router and access point modes for the Deco X50.

What if the lecture still drops out after installation?

Compare the connection in the basement with one near the router and, if possible, with a wired connection. If the problem also occurs outside the basement Wi-Fi, check your internet connection or contact your ISP. Otherwise, check the placement and connection of the mesh points.

Does the manufacturer’s warranty mean your rights end when it expires?

No. According to ACM ConsuWijzer, your statutory rights apply alongside a retailer’s or manufacturer’s warranty. If a product breaks sooner than you could reasonably expect under normal use, the retailer is responsible for providing an appropriate solution.

Do you need a licence for ordinary home Wi-Fi in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, home Wi-Fi is licence-free if you use the designated frequencies and comply with the conditions of use. The equipment must still meet the relevant requirements: check that it has the correct CE marking and follow the specified country and frequency settings.