Who is an autopilot panel for?

Flight simmers with an existing throttle

If you already have engine controls, a separate autopilot panel lets you set simulated modes using physical controls, without buying a second throttle. Logitech G describes operation using buttons and rotary knobs, while Honeycomb Aeronautical combines autopilot controls with throttle levers.

Builders of a compact desk setup

If you want to practise from your seat, consider how far you’ll need to reach and how much room the panel, mounting hardware and any levers will take up. Honeycomb Aeronautical gives the Bravo’s base dimensions excluding the mounting plate or clamp; CPflight describes the MCP737PRO3 as being built into a cockpit structure.

Pilots practising on a single aircraft type

If you mainly simulate a GA, Airbus or 737 cockpit, you can look for a layout that suits that aircraft type. RealSimGear, miniCOCKPIT and CPflight respectively design the panels mentioned for a Garmin-style GA layout, Airbus add-ons and the 737 NG/MAX. Check support for your specific aircraft.

What should you consider when choosing?

Standalone autopilot panel

Suitable if: you already have a throttle and want to use physical buttons and rotary knobs from your seat.

Trade-off: the throttle remains a separate component; check compatibility with your simulator and aircraft.

Combined throttle and autopilot

Suitable if: you want both engine levers and autopilot controls in one setup.

Trade-off: according to the manufacturer, the Honeycomb Bravo has a base measuring 273 × 382 mm, excluding the mounting plate or clamp, so allow for the desk space it requires.

Aircraft-specific panel

Suitable if: you mainly practise in a compatible GA, Airbus or 737 aircraft and want a layout designed for it.

Trade-off: the controls are less interchangeable between aircraft types; RealSimGear describes configuration for certain X-Plane aircraft, while CPflight does not guarantee compatibility with all add-ons.

Programmable button controller

Suitable if: you want to set up your own shortcuts and don’t need a fixed aircraft panel layout.

Trade-off: profiles and shortcuts need configuring; Elgato notes that the available actions depend on the aircraft and flight context.

First decide which controls you want to practise using from your seat. Then check that they’re compatible with your simulator and aircraft, and that you have enough space.

Consideration What to check before buying Who is this important to?
Controlling autopilot modes physically Check that the panel has the modes and controls you want to practise, such as buttons, rotary knobs and useful feedback. I want to adjust settings using physical controls from my seat, rather than constantly searching for on-screen controls. Physical autopilot controls are the top priority for around 25% of consumers.
Simulator and aircraft support Make a note of your simulator version and exact add-on aircraft; check which interface, plug-in and button mappings you’ll need. If I use a specific simulator version and add-on, I want to know in advance whether they’ll work with the panel. Compatibility is the top priority for around 25% of consumers.
Reach and positioning Measure the available space and how far you can reach from your usual seating position, including any clamp, cables and room for levers to move. I want to reach the controls without constantly changing my posture, and need to know whether the whole setup will fit on my desk. Around 19% of consumers prioritise positioning and reach.
Whether a throttle is included Decide whether you already have suitable engine controls, then compare the levers and software mappings on a combined system. If I also need engine levers, I want to use them alongside autopilot controls. This combination is the deciding factor for around 19% of consumers.
Layout for a single aircraft type Compare the exact aircraft and avionics with the supported functions, and check the mounting requirements. I mainly practise on one aircraft type and want to use buttons that match its cockpit layout. Around 12% of consumers prioritise an aircraft-specific layout.

Buying pitfalls to avoid

  • Assuming that compatibility with one simulator means support for every aircraft

    The Logitech plug-in listing was updated on 29 December 2020. CPflight warns that not all add-ons are fully compatible, so a general reference to a simulator does not confirm that every feature you want will work in your setup.

    Before buying, check your exact simulator version, add-on aircraft and required software. Allow time for plug-ins and button mapping, too.

  • Choosing a combined panel without measuring your setup

    Honeycomb’s stated Bravo base dimensions exclude the mounting plate and clamp. According to its manual, the CPflight MCP737PRO3 is designed to be built into a cockpit structure.

    Measure the available space and reach from your usual seating position, including the room needed for the levers and mounting hardware.

  • Assuming a home panel is the same as recognised flight training

    The Human Environment and Transport Inspectorate treats the qualification of training simulators separately. A specialist panel layout alone does not show that a home setup meets training requirements.

    Use a home panel to practise simulated controls, and discuss formal training goals with your training organisation.

Brands to compare

Logitech G

The Flight Multi Panel is a standalone panel for physical autopilot control, designed as an add-on if you already have a throttle.

  • Logitech G lists buttons, rotary knobs, an LED display and a trim wheel.
  • The Logitech Support plug-in listing was updated on 29 December 2020 and does not, by itself, confirm support for every MSFS 2024 setup or add-on.

Honeycomb Aeronautical

The Bravo Throttle Quadrant combines configurable engine levers with an autopilot panel.

  • Honeycomb Aeronautical lists six levers and an integrated autopilot panel.
  • The stated base dimensions are 273 × 382 mm, excluding the mounting plate or clamp. Separate downloads are listed for certain LED functions.

RealSimGear

The GFC500 is designed around a Garmin-style autopilot layout for compatible GA simulations.

  • RealSimGear lists controls including HDG and CRS knobs, as well as mode indicators.
  • According to the X-Plane manual, configuration may be needed for aircraft with a different type of autopilot. RealSimGear also offers a separate device interface for MSFS.

miniCOCKPIT

According to miniCOCKPIT, the miniFCU V2 is designed for flight simmers using compatible Airbus add-ons.

  • For the V2, the manufacturer lists a USB-C connection and an on/off switch.
  • The product information does not confirm compatibility with every individual add-on; check support for your aircraft.

CPflight

The MCP737PRO3 is a 737 NG/MAX replica for a cockpit setup designed around that aircraft.

  • CPflight lists specific mode buttons and displays.
  • The manual specifies that it must be built into a cockpit structure and warns that not all add-ons are fully compatible.

Joybuy products

Related products will be available soon.

Frequently asked questions

Is a standalone autopilot panel enough for a complete simulated flight?

No. A standalone autopilot panel does not automatically replace all aircraft controls. Logitech G describes the Flight Multi Panel as providing autopilot and additional panel functions. If you also want physical engine controls, compare a combined system such as the Bravo described by Honeycomb Aeronautical.

How can you check whether the buttons will work with your simulator and aircraft?

Check the software for your simulator version and the mappings for the aircraft you’re using. RealSimGear describes a separate device interface for MSFS; some X-Plane aircraft with a different type of autopilot may need additional configuration.

What should you check again after changing your simulator or aircraft?

After changing your simulator, aircraft or software, check that the button mappings and indicators still match the functions you want to practise. Honeycomb Aeronautical lists separate downloads for certain Bravo LED functions; a light coming on alone does not confirm that every autopilot mode is working correctly.

What are your rights when buying online in the Netherlands?

According to the Dutch Government, online purchases often come with a 14-day cooling-off period, although there are exceptions. You’re also entitled to a product that meets the terms of the agreement: the Dutch Government states that there is no fixed statutory warranty period in the Netherlands. If a product is faulty, contact the seller.

Does practising with a home panel count as official flight training?

Not automatically. The Human Environment and Transport Inspectorate describes the qualification of Flight Simulation Training Devices and sets out conditions for using an FSTD for certain LAPL and PPL radio navigation exercises. This information does not confirm that a home panel or home computer qualifies as a training device; discuss formal training goals with your training organisation.