Which interface is right for you?

Mixing existing vocal tracks

Your harmonies are already recorded and you want to listen to them through headphones or monitors. So focus on the listening outputs and controls.

Singer recording overdubs

You’re mixing and recording new layers. The number of microphone inputs you need at once, and whether you choose direct or DAW monitoring, will both shape your workflow.

Mixing with a second listener

You’re working alongside a singer or want an additional listening route. Check both the number of headphone outputs and which signals you can actually send to them.

What should you look for when choosing?

First decide whether you’re only mixing existing harmonies or also recording new vocal layers. Then consider extra listening outputs or features for your computer setup.

What to consider What should you look for? Who is this important for?
One suitable listening route Check the headphone socket, volume control and left and right monitor outputs. I only mix existing vocal tracks and want to listen to them properly through my headphones or monitors; around 36% of consumers prioritise one suitable listening route.
Recording new harmonies Count the microphone inputs you need at once and decide whether to use direct monitoring or listen through your DAW. When I record new vocal layers, my microphone and chosen monitoring route need to work together; around 29% of consumers prioritise recording and listening to new takes.
A second listener or extra output Check whether the headphone outputs are independent and whether the number of line outputs suits your equipment. I want to work with a second listener or connect extra line-level equipment; around 21% of consumers prioritise that extra listening position or output.
Connecting to your computer Check the USB port, available power and operating system against the requirements of the exact model. If my computer needs to connect to and power the interface, I want to make sure they’re compatible first; around 14% of consumers make computer compatibility their main selection criterion.

Pitfalls to avoid

  • Buying extra recording channels when you only mix existing tracks

    When playing back and mixing vocals that have already been recorded, suitable listening outputs are the first practical thing to consider.

    Map out your listening setup first: computer, interface, headphones and any monitors. Then compare the number of inputs.

  • Confusing direct monitoring with hearing DAW effects

    Direct monitoring lets you hear the input signal before it’s processed by the DAW. If software monitoring is active too, you may hear the same signal twice.

    Choose one monitoring route when recording. If you want to hear the processed vocal, check the DAW route and the latency it introduces.

  • Assuming two headphone sockets always provide two separate mixes

    The number of sockets alone doesn’t tell you whether each listener can hear a different mix.

    Check the manual for the exact model to see which signals go to each headphone output.

    If you can’t route the signals you need to the available outputs, you may need a different interface or additional equipment.

  • Looking only at the shape of the USB connector

    For full USB bus power, Audient specifies USB 3.0 with a minimum of 900 mA for the iD14 MKII.

    For this model, check both the USB version and the power available from the port you plan to use.

Brands to consider

Focusrite

The Scarlett 2i2 4th Gen is designed for a compact recording and listening setup, with up to two microphones connected at once.

  • Focusrite specifies two XLR microphone inputs, one headphone output and two balanced line outputs.
  • Plugging a line-level connector in disables the XLR input on the same channel. This model doesn’t offer any additional physical listening routes.

Solid State Logic

The SSL 2+ MKII is worth considering if you want to explore two independently controlled headphone outputs and extra line outputs.

  • The SSL manual specifies two independent headphone outputs with separate volume controls and four balanced outputs.
  • According to the manual, installation on Windows requires an SSL driver.

Audient

The iD14 MKII may suit a setup that can make use of two headphone sockets, extra line outputs or optical ADAT input expansion.

  • Audient specifies two microphone preamps, two headphone outputs and an optical input.
  • Audient specifies USB 3.0 with a minimum of 900 mA for full USB bus power. Two headphone sockets don’t prove that you can send two different mixes.

MOTU

The M4 is worth a look if you need four physical line outputs and clear input and output meters.

  • MOTU specifies four balanced TRS line outputs and two microphone/line inputs.
  • The M4 has one headphone output. Loopback routes computer audio back in; it isn’t a second physical headphone output.

Steinberg

The UR22C is a 2-in/2-out alternative to consider if you also want to record vocals using the dspMixFx monitoring described by Steinberg.

  • The Steinberg manual confirms two microphone preamps and a 2-in/2-out configuration; Steinberg describes DSP monitoring with effects.
  • A 2-in/2-out configuration alone doesn’t prove that a second separate stereo listening route is available.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need microphone inputs if all my harmonies are already recorded?

No, not for playing back and mixing existing tracks. First check that the headphone and monitor outputs suit your listening equipment. Then decide whether you also want to record new takes.

Why do I hear my voice twice when recording?

If direct monitoring and software monitoring are both active, you may hear both the direct signal and the DAW version. Focusrite recommends turning off software monitoring on the recording track when using direct monitoring.

Can I connect a condenser microphone?

It depends on the microphone and the exact interface model. The Scarlett 2i2 4th Gen has 48V phantom power, which Focusrite says is applied to both microphone inputs when switched on. Check what your microphone requires before connecting it.

What if the interface doesn’t work properly after I buy it?

For a consumer purchase in the Netherlands, the seller must offer a solution if the product doesn’t meet what you could reasonably expect. The Dutch government explains that there is no fixed legal warranty period of two years.

Can I try out an interface bought online and return it?

For an online consumer purchase in the Netherlands, you generally have a legal cooling-off period of up to 14 days after delivery. ACM ConsuWijzer notes that applicable terms and exceptions may be relevant.