Who is this choice relevant to?

Quiet stereo mixer

You mainly mix the soundtrack through headphones at a shared desk and don’t need separate physical cue routes.

Cue designer needing extra outputs

You want to send sounds or monitor mixes to separate equipment as well as the main output, so the number of physical outputs matters when choosing.

Pair with individual listening mixes

You’re working with a colleague and both want to use headphones, possibly with your own mix rather than the same stereo signal.

What should you look for?

Start with your cue and listening plan: work out how many independent physical routes you need, then consider how you’ll use the interface with a second listener, and finally check your computer and software requirements.

What to consider What should you check? Who should pay particular attention?
Quiet, controlled listening Check the signal source for the headphones and how you control the listening volume. If I mainly mix in stereo through headphones at a shared desk, I want to know what signal they receive and be able to control the level. Around 36% of consumers prioritise quiet listening when buying.
Separate physical cues Map out the mono and stereo routes you need and compare them with the independently assignable physical line outputs. When I need to send cues or monitor mixes to separate equipment, my choice comes down to the physical route for each destination. Around 29% of consumers give separate cue or monitor routes top priority.
Two listeners Check both the number of headphone sockets and whether you can assign mixes separately. If a colleague is listening at the same time, I want to know in advance whether we’ll share one programme or each need our own cue. Around 21% of consumers prioritise listening together as a pair.
Computer and software Check the system requirements for the specific model and the connection required by your computer and software. If my existing computer and software need to work with the interface, compatibility is my first consideration. Around 14% of consumers say compatibility with their computer and software is their main requirement.

Common buying mistakes

  • Assuming the total channel count equals the number of physical speaker outputs

    A mirrored pair of sockets or a digital channel doesn’t automatically provide an extra, independently assignable analogue cue route.

    Count the physical outputs required by your cue plan. MOTU says the RCA outputs on the MOTU M4 mirror existing outputs.

    If your plan requires more physical outputs than the interface offers, you may need an interface with more outputs.

  • Assuming two headphone sockets mean two individual mixes

    The number of sockets and the ability to assign separate programmes are two different features. For example, RME describes the Babyface Pro FS headphone sockets as parallel outputs.

    Check the routing for the exact model and establish which mix each listener can hear.

    If the mixes you want aren’t available directly, you may need a different interface or additional routing equipment.

  • Testing the routing while the headphones are already turned up loud

    Audient warns that DAW thru on the iD14 MKII bypasses the volume control for the assigned headphone output. The World Health Organization points out that both sound level and listening time affect the risk of hearing damage.

    Start at a low level and check which cue mix and volume control are active before listening.

Brands and models to consider

Focusrite

The Scarlett 2i2 4th Gen and Scarlett 4i4 4th Gen offer different listening and output options; compare the routing on the specific model.

  • Focusrite specifies four balanced line outputs and a separate headphone mix for the Scarlett 4i4 4th Gen.
  • On the Scarlett 2i2 4th Gen, Focusrite says the headphones share their signal source with line outputs 1 and 2.

MOTU

The M4 is worth considering for a compact setup with line outputs, headphones and MIDI.

  • MOTU specifies four balanced TRS line outputs and a headphone output.
  • The RCA sockets mirror existing outputs, so they don’t provide extra independent routes.

Solid State Logic

The SSL 12 is worth comparing if two people share a desk and you need extra line outputs.

  • Solid State Logic describes two headphone outputs and routing for separate mixes through SSL 360°.
  • The manual says a dedicated driver is required on Windows. The headphone outputs don’t automatically replace the physical theatre outputs you need.

Audient

The iD14 MKII is designed for a compact desk setup with line outputs and assignable headphone monitoring.

  • Audient documents that the headphones can be assigned to a cue mix.
  • Audient warns that DAW thru bypasses the volume control on that output; check the routing and level before listening.

RME

The Babyface Pro FS is a compact option to weigh up against your specific cue plan and the physical outputs it requires.

  • RME describes independent routing to physical outputs via TotalMix FX, along with separate amplifier circuits for the two headphone outputs.
  • RME describes those headphone sockets as parallel, so don’t assume they provide two independent stereo cues.

Audio interfaces on Joybuy

Related products coming soon.

Frequently asked questions

Can I mix a stereo soundtrack and send separate cues with an interface that has two outputs?

You can work in stereo, but to run separate physical cue routes at the same time, check which additional device outputs are available. QLab can route cue outputs to device outputs, but it can’t add physical connections to an interface with two outputs.

How can I avoid unexpectedly loud audio when sharing a headphone setup?

Turn the listening volume down before changing the routing, and check who can hear which mix. Audient specifically warns that DAW thru on the iD14 MKII bypasses the volume control for that headphone output. According to the World Health Organization, both volume and listening time contribute to the risk of hearing damage.

What warranty and return rights apply to online purchases in the Netherlands?

According to the Dutch government, many online purchases from a business come with a 14-day cooling-off period; check which terms and exceptions apply to your purchase. You’re also entitled to a product that meets expectations. The Dutch government says there is no fixed statutory warranty period in the Netherlands; if there’s a problem, contact the seller.