Who is this choice relevant to?

Headphone listener

You assess restored files mainly through one pair of headphones. Check that the connection, available output level and volume control suit your headphones.

Monitor listener

You check files through active speakers in your workroom. Decide how many monitor outputs you need and whether one stereo pair is enough.

Archivist working with analogue sources

As well as listening to restored files, you want to transfer material from an analogue source. The source output and the interface input type are then important points to consider.

Which connections matter?

Buying concern What should you check? Who is this most relevant to?
Headphone output Check the plug and the specified output figures at a relevant load; don't judge suitability on impedance alone. If I mainly listen through one pair of headphones, I want to know whether the connection and volume control suit my setup. Consumers who prioritise headphone monitoring make up around 36% of those considering an interface for this task.
Connection for active monitors Check the output type and whether one pair of stereo connections is enough for your monitor setup. If I assess restored files through active speakers, I want outputs that suit my monitors without paying for connections I won't use. Consumers who prioritise monitor playback make up around 29% of those considering an interface for this task.
Analogue transfer Check the source output, the input type and the interface's suitable signal level. If I want to transfer material from an analogue source as well as work with existing files, the whole playback chain needs to be right. Consumers who prioritise transferring analogue archive sources make up around 21% of those considering an interface for this task.
Separate listening paths Check whether the outputs can actually receive separate signals; having several connections does not prove that they can. If I want to assess different listening setups or signals separately, I need more than extra sockets. Consumers who prioritise separate listening paths make up around 14% of those considering an interface for this task.

Common buying mistakes

  • Assuming two types of output mean two independent listening mixes

    According to Focusrite, the headphone output on the Scarlett 2i2 4th Gen shares the same audio stream as the line outputs. MOTU says the RCA outputs on the M2 are mirrored and do not form a separately routable stereo pair.

    Check explicitly whether the interface can route the separate signals you want to monitor; don't just count the sockets.

  • Buying an interface for analogue media without planning the playback chain

    An audio interface accepts a signal from a connected source, but it does not play the original media itself. The International Association of Sound and Audiovisual Archives recommends keeping the original media for possible future consultation.

    First, list the media, the playback equipment you'll need and the outputs available. Then choose inputs that suit the source.

    This setup may also require suitable playback equipment and cables.

  • Treating an output figure as universal proof of headphone compatibility

    Audient lists output figures for the iD14 MKII at different loads. A figure at one load does not, on its own, tell you how the output will perform with different headphones.

    Compare the specification at a relevant load and check that the plug and power supply suit your setup.

Brands and models to consider

Focusrite

The Scarlett 2i2 4th Gen is a compact option for one pair of monitors, one pair of headphones and, if needed, two analogue inputs.

  • Focusrite specifies separate volume controls for the monitors and headphones.
  • According to Focusrite, the line outputs and headphone output share the same audio stream, so this does not automatically provide an independent listening mix.

MOTU

The M2 has balanced TRS outputs, a mirrored pair of RCA outputs and clear input and output meters.

  • MOTU specifies a dedicated volume control for the headphone output.
  • MOTU describes the RCA outputs as mirrored; don't count them as an extra, independently routable stereo pair.

Solid State Logic

The SSL 2+ MKII is worth considering if you need separate headphone outputs or extra balanced outputs.

  • Solid State Logic specifies two independent headphone outputs and four balanced outputs.
  • The extra connection options may go unused if you only need one fixed listening path.

Audient

The iD14 MKII is worth considering if its output figures at a known load and the available USB power are relevant to you.

  • Audient publishes output figures at different loads and specifies a minimum of 0,9 A at 5 V via at least one USB 3.0 port.
  • Don't compare these figures directly with manufacturer figures measured differently as proof of audible superiority.

RME

The Babyface Pro FS is an option for a more advanced workflow with software routing and an adjustable reference level for monitor outputs.

  • RME describes TotalMix FX and switching between +19 and +4 dBu to reduce the output level for sensitive active monitors.
  • These features are specific to this model; they don't mean every home studio needs this routing.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need an audio interface to record an already digitally restored file again?

No. You don't need recording inputs just to listen to an existing digital file. Extra inputs are useful if you also want to transfer an analogue source. The International Association of Sound and Audiovisual Archives treats playback from the original media as a separate step in archive work.

What should I check when connecting to my computer?

Compare the requirements for the exact model with your computer, and check which port and power supply it needs. Audient specifies a minimum of 0,9 A at 5 V via at least one USB 3.0 port for the iD14 MKII; MOTU publishes separate system requirements for Mac and Windows for the M2.

How can I keep the provenance of a restored archive version clear?

Keep the original media where possible and document any changes made before the material was added to the archive file. This is in line with recommendations from the International Association of Sound and Audiovisual Archives; an audio interface does not document this automatically.

How does the warranty work when buying as a private individual in the Netherlands?

According to the Dutch government, you are entitled to a product that works properly, and there is no fixed statutory warranty period in the Netherlands. If a product is faulty, contact the seller; a manufacturer's warranty is in addition to your statutory rights.

What rules apply when buying and using archive audio?

Equipment placed on the EU market must comply with the applicable product rules; CE marking is required when specific harmonised EU rules prescribe it for the product. The Dutch government says you can make a private copy of copyright-protected material for your own use, but not distribute it. You must assess the rights for each specific archive work separately.