For introductions recorded by pupils taking turns to use one XLR microphone connected to a computer, an interface with one microphone input is enough. For two people speaking at the same time, you’ll need two microphone inputs. If you want to record without a laptop, look for a standalone recorder that also works as a USB interface, and check how many channels it sends over USB. Even a good interface can’t make up for an unsuitable microphone distance or a test recording in the classroom.
Who is this guide for?
Teacher with one speaking position
You want pupils to take turns recording a short introduction at one microphone, then check the recording on a computer. Focusrite and PreSonus product information, along with microphone advice from RØDE, is relevant to this setup.
Facilitator recording two-person conversations
You want to record two pupils speaking at the same time, each using their own microphone, and adjust the level of each mic independently. Audient, Focusrite and MOTU describe models with two microphone inputs or preamps.
Recorder working between classrooms
You don’t always have a laptop available when recording and want to transfer files later. Zoom describes the PodTrak P4 as a recorder that can record directly to an SD card.
What should you look for?
USB interface with one microphone input
A good fit when: pupils take turns speaking in the same place and a computer is used to record.
Keep in mind: two XLR microphones used at the same time require a different number of microphone inputs.
USB interface with two microphone inputs
A good fit when: two speakers each use their own XLR microphone at the same time.
Keep in mind: extra inputs won’t solve an unsuitable microphone distance. Test the level controls and computer compatibility for each model.
Standalone recorder with USB functionality
A good fit when: you want to record without a laptop connected and transfer files later.
Keep in mind: the number of recorder inputs doesn’t automatically match the number of channels available over USB.
| What to consider |
What should you check? |
Who is this important for? |
| Recording one speaker clearly |
Check the XLR microphone input, headphone output, level controls and microphone distance. Make a test recording from the intended speaking position. |
If pupils take turns speaking, I want a simple setup that lets me check the recording; around 36% of consumers say a single speaking position is their main purchase requirement. |
| Connecting two voices at the same time |
Count the actual microphone inputs, not just the total number of inputs, and test the levels for both speakers. |
If two pupils speak at the same time, each using their own microphone, I need two usable inputs; around 29% of consumers prioritise using two microphones simultaneously. |
| Recording without a computer |
Check that the device can record on its own, what storage and power it needs, and how many channels it sends over USB. |
If I work between classrooms and can’t always connect a laptop, I want to be able to record directly on the device; around 21% of consumers name standalone recording as their main requirement. |
| Clarity and connections |
Test the recording in the intended location and check the microphone type, cable, headphone connector, any 48V requirement and the system requirements for the exact model. |
If I want to use existing equipment or need to assess clarity first, I want to make sure the setup and connections are suitable; around 14% of consumers put this first. |
Common pitfalls
-
Assuming two inputs means two microphone inputs
On the Focusrite Scarlett Solo 4th Gen and PreSonus AudioBox GO, one input is intended for a microphone. Another input isn’t automatically suitable for a second XLR microphone. So, an interface with two inputs in total may still be unsuitable for two people speaking at once.
Count the microphone inputs on the exact model and check the connection type of the other input.
For two XLR microphones used at the same time, you may still need an interface with more microphone inputs.
-
Expecting an interface to make distant voices clearer automatically
When the microphone is further away, voices may sound quieter while background noise or echo becomes more noticeable. An interface won’t change the distance or the classroom acoustics.
First, make a test recording from the planned speaking positions and check that the voices are easy to understand.
If you need to capture voices from several positions, you may need a different microphone setup or extra equipment.
-
Confusing four recorder inputs with four USB channels
The Zoom PodTrak P4 has four XLR microphone inputs for standalone recording, but works as a 2-in/2-out interface over USB. So, connecting four microphones to the recorder doesn’t mean four separate USB channels will go to the computer.
Decide in advance whether you want to record separate tracks to an SD card or need multiple channels sent directly to the computer. For standalone recording, remember to allow for suitable storage and power too.
-
Focusing only on the equipment when recording in a classroom
An audio recording in which someone can be identified may count as personal data. The Dutch Data Protection Authority says that organisations must determine the applicable GDPR legal basis before processing personal data.
Before making identifiable recordings, agree on the purpose, legal basis, access to files, storage and retention period. The Dutch Data Protection Authority also reminds schools of their duty to provide information.
Brands to compare
Focusrite
The Scarlett Solo 4th Gen is designed for one XLR microphone, while the Scarlett 2i2 4th Gen has two microphone preamps, according to Focusrite.
- Focusrite lists direct monitoring and 48V on the Scarlett Solo 4th Gen.
- The Scarlett Solo 4th Gen has one XLR microphone input. Features vary by model.
- Focusrite lists Auto Gain for the Scarlett 2i2 4th Gen.
Audient
The EVO 4 is an option for a computer setup with two microphones.
- Audient lists two microphone preamps and Smartgain on the EVO 4.
- Test Smartgain with a representative recording and check compatibility with the school computer you’ll be using.
PreSonus
The AudioBox GO is designed for a computer setup where one XLR microphone is enough.
- PreSonus lists a microphone/line input, a separate instrument input and an adjustable monitor mix.
- The 2x2 designation doesn’t mean you can connect two XLR microphones at the same time.
MOTU
The M2 is an option when two microphones need their own connections and level controls.
- MOTU specifies two XLR/TRS combo inputs, individual gain, 48V and hardware monitoring for each input.
- Check the system requirements for the computer you’ll be using; specifications for this model don’t automatically apply to other MOTU models.
Zoom
The PodTrak P4 is designed for standalone recording and can also be used as a USB interface.
- Zoom specifies four XLR microphone inputs and recording to an SD card.
- Over USB, the P4 works as a 2-in/2-out interface. For standalone use, remember to allow for a memory card and power too.
Joybuy products
Related products coming soon.
Frequently asked questions
Do I need an interface with two inputs for two pupils?
Only if they need to speak at the same time using two separate microphones. In that case, check that the device has two microphone inputs. If they take turns, one XLR microphone input may be enough; a second input on a 2x2 device isn’t automatically a second microphone input.
How can I stop an introduction from being recorded too quietly?
Position the microphone appropriately for the speaker and make a test recording in the actual recording location. Set the level while someone speaks at the loudest volume you expect; with the Audient EVO 4, the test should reflect the voices you want to record.
What should I check besides the interface?
Check that your microphone, cable, headphones and computer connection are compatible with the interface you choose. If a condenser microphone needs phantom power, the chosen connection must be able to provide it. For standalone recording with the Zoom PodTrak P4, you’ll also need suitable storage and power.
What are your rights in the Netherlands if an interface develops a fault?
Consumer purchases are covered by statutory guarantees, in addition to any manufacturer’s guarantee. According to ACM ConsuWijzer, the seller is your point of contact if the product develops a fault sooner than could reasonably be expected under normal use. There is no single fixed statutory guarantee period for all products. Also check whether a purchase made by the school counts as a consumer purchase.
Can a school record and keep identifiable spoken introductions?
Not without first assessing the specific processing involved. The Dutch Data Protection Authority considers identifiable audio recordings to be personal data; the organisation must determine the applicable GDPR legal basis before processing. Schools also have a duty to provide information. Agree on the purpose, who will be speaking, access, storage and retention period for the planned process; consent is not automatically the required legal basis for every recording.