If you’re only mixing existing vocal tracks, look for an interface with suitable headphone and monitor outputs, plus controls you can easily reach on your desk; your audio software will mix the tracks. If you’re also recording new vocals, decide whether you’ll record parts one at a time or use two microphones simultaneously, then check the mic preamps, monitoring and computer requirements for the exact model.
Who is this buying guide for?
You’re mixing vocals you’ve already recorded
You want to check your harmony parts on a small desk using headphones or monitors. The Audacity Manual explains how to mix multiple tracks in software; when choosing an interface, focus on its connections and controls that are easy to reach.
You’re recording vocal parts one at a time
You’re recording harmonies separately and want to hear existing tracks while you record. The Audacity Manual describes this workflow; check the interface’s mic input, headphone connection and monitoring features.
You’re recording with two microphones at once
You want to capture two voices as separate signals. Focusrite and MOTU specify models with two mic preamps or mic/line inputs; check how many mic preamps the version you’re considering has.
What should you look for when choosing?
First decide whether you’re only mixing existing takes or recording as well. Then check that the connections, controls and available desk space suit your set-up.
| What to consider |
What should you check? |
Who should prioritise this? |
| Listening back to existing tracks |
Check that the headphone plug and monitor outputs are suitable, and that you can reach the volume control from your desk. The Audacity Manual explains how to mix tracks in software. |
If I’m only mixing existing harmony parts, I want to be able to listen to them properly through my own headphones or monitors. Around 36% of consumers prioritise listening back to existing vocal tracks. |
| Recording new vocals |
Count the mic preamps, not just the total number of inputs. Audient lists one for the iD4; Focusrite lists two for the Scarlett 2i2 4th Generation. |
If I’m recording new parts, my choice depends on whether I’m singing alone or using two microphones at once to capture separate signals. Around 29% of consumers give recording new harmony parts their highest priority. |
| Space and controls |
Measure the available space, allowing for plugs and cable bends, and check that the controls will remain within reach. MOTU lists the M2’s dimensions as 19.05 × 10.8 × 4.5 cm; these measurements don’t include connected cables. |
On my small desk, I want the interface to fit and its connections and controls to be within reach. For around 21% of consumers, available desk space is their main buying concern. |
| Computer and extra connections |
Compare the system requirements for the exact model with your computer. Check for MIDI, loopback or expandability only if you need those features; Steinberg lists MIDI and loopback for the UR22C. |
If the connection to my computer or other equipment determines my choice, I check compatibility before choosing a model. Around 14% of consumers prioritise computer and device connections. |
Avoiding common buying mistakes
-
Choosing more inputs because your mix has lots of vocal tracks
The number of tracks you mix in software isn’t the same as the number of microphones you record with at once. The Audacity Manual explains how to mix multiple tracks in software.
First decide how many microphones you want to record simultaneously as separate signals.
-
Assuming two inputs means two mic preamps
Audient lists two input channels for the iD4, but just one mic preamp. Focusrite lists two mic preamps for the Scarlett 2i2 4th Generation.
Check how many separate mic preamps the exact version of the model has.
-
Measuring only the unit itself
The stated dimensions of the unit don’t tell you how much room connected plugs will need. Focusrite lists a 6.35 mm TRS headphone plug for the Scarlett 2i2.
Before placing the interface on your desk, allow for plugs and cable bends, and make sure you can reach the controls.
Check that your headphones have a suitable connection; you may need an adaptor.
Brands to consider
Focusrite
The Scarlett 2i2 4th Generation is worth considering if you want to connect two microphones at once.
- Focusrite lists two mic preamps and recording features such as Auto Gain.
- These recording features aren’t proof that vocal harmonies will sound better when mixed. If you’re only mixing existing tracks, you may not need two mic preamps.
Audient
The iD4 is designed for a compact set-up with one mic preamp; according to Audient, the iD14 has two mic preamps and ADAT expansion.
- Audient lists two headphone outputs for the iD4 and a casing measuring around 13 × 12 cm.
- The iD4 has one mic preamp, so it isn’t designed for connecting two microphones at once as separate inputs. Treat sound-quality claims as manufacturer claims.
Arturia
The MiniFuse 2 is worth considering if you want to adjust the balance between the live input and computer playback while listening.
- Arturia lists two inputs, separate monitor and headphone controls, 48V phantom power and a monitoring mix control.
- Check that the connections and features suit your equipment; Arturia’s sound-quality statements are manufacturer claims.
MOTU
According to MOTU, the M2 has two combination mic/line inputs and front-panel level meters.
- MOTU lists a headphone output, LCD level meters and casing dimensions of 19.05 × 10.8 × 4.5 cm.
- Check MOTU’s published system requirements for your computer and allow room for connected cables when measuring up.
Steinberg
The UR22C is worth considering if, alongside recording vocals, you need MIDI, monitor mix or loopback for streaming.
- Steinberg lists two inputs and outputs, MIDI and monitor mix.
- Loopback is useful for streaming, but on its own it isn’t a reason to choose this model for mixing existing vocal tracks.
Joybuy products
Related products will be available soon.
Frequently asked questions
Can I mix vocal harmonies without two mic inputs?
Yes, if the separate takes have already been recorded or you record new parts one at a time. The Audacity Manual describes both workflows: recording harmony parts one by one and mixing multiple tracks in software. To record from two microphones at once as separate signals, you’ll need two suitable mic preamps.
Is direct monitoring the same as listening to my processed vocals?
No. Direct monitoring lets you hear the live input signal; to hear processed vocal tracks, listen to the playback from your audio software. Check how the model you choose combines the live input and computer playback.
What should I check about the connections and placement?
Check the system requirements for the exact model, the plug on your headphones, and the space needed for connections and cables. Focusrite lists a 6.35 mm TRS headphone plug for the Scarlett 2i2. In the M Series manual, MOTU advises disconnecting the device from the computer before cleaning and using only a dry cloth.
Who can help if the interface turns out to be faulty after purchase?
For a consumer purchase in the Netherlands, the Dutch government says that the seller must provide a solution if there’s a problem with the product. A manufacturer’s warranty or an extended warranty you’ve bought is separate from your statutory rights. Online distance purchases also usually come with a 14-day cooling-off period, subject to legal exceptions.
Does a CE mark mean an audio interface has been officially approved?
No. The European Commission explains that CE marking is required only for products specifically covered by the relevant harmonised EU rules. It isn’t a centrally issued approval certificate.