Who is this guide for?

Mixing on headphones

You’re mixing pre-recorded harmonies in a home studio and want an easy way to adjust your listening volume. MusicTech highlights the importance of having the connections you need for the equipment you plan to use at the same time, so check that the headphone output suits your workflow.

Recording harmonies layer by layer

You’re recording new harmonies one at a time and want to hear your voice alongside existing tracks. Focusrite and Audient describe direct monitoring as a way to send the input signal to a headphone or line output.

Creating a separate monitor mix

You’re recording with someone else or want a different headphone mix from the main mix. Ableton Live describes how to do this using separately available stereo outputs and assigning them appropriately in the software.

What to consider when choosing

First decide whether you’ll only be mixing existing recordings or also recording new takes. Then work out how many microphone inputs you need to use at once and which monitoring features are right for you.

What to consider What should you check? Who is it for?
Listening on headphones Check that the interface has a suitable headphone output and its own volume control. Also compare that connection with your computer’s output. If I’m mixing existing vocal tracks, I want to be able to adjust the listening level easily. Around 36% of consumers prioritise headphone listening above all else.
Recording new vocal layers Count the individual microphone preamps you’ll need for the number of singers you want to record at once. Focusrite notes that using a jack input on the Scarlett 2i2 4th Generation disables the corresponding XLR input. If I’m recording harmonies one take at a time, I want to hear the live vocal alongside existing tracks. Around 29% of consumers put recording new vocals first.
Separate headphone mix Check whether the outputs can be controlled independently and whether your DAW can assign the output pairs you need. Audient warns that DAW thru on the iD14 MKII bypasses the volume control. If a singer needs a different balance from the main mix, I want to be able to set up a separate route. Around 21% of consumers place particular importance on a separate monitor mix.
Computer and software Check the connection and power requirements of the exact version against your computer. Audient specifies a minimum of 0.9 A at 5 V via a suitable USB 3.0 port for the iD4 MKII. If I want to use the interface with a laptop, I want to make sure the connection, power supply and software are all compatible. Around 14% of consumers put compatibility at the top of their list.

Common buying mistakes

  • Counting every connection as a microphone input

    An instrument input isn’t automatically an extra XLR microphone input. Audient specifies one microphone preamp for the iD4 MKII; on the Scarlett 2i2 4th Generation, a jack input can disable the corresponding XLR input, according to Focusrite.

    Count the individual XLR microphone preamps you can use at the same time and need for your recording setup.

  • Assuming two headphone sockets mean two separate mixes

    An extra socket doesn’t automatically give each listener their own mix. You’ll need suitable, independently assignable outputs and the right software configuration.

    Check the cue routing for the exact model and assign the available output pairs in your DAW.

  • Using direct and software monitoring at the same time

    Focusrite says that hearing the direct input signal and a delayed DAW version at the same time can cause an echo.

    Choose one monitoring route. If you’re using direct monitoring, switch off software input monitoring if you don’t want to hear the vocal twice.

  • Assuming any USB port will provide enough power

    Audient specifies a minimum power supply of 0.9 A at 5 V via a suitable USB 3.0 port for the iD4 MKII; not every computer port will necessarily meet this requirement.

    Compare the requirements of the exact version with your laptop’s port before you choose.

Brands and models to consider

Focusrite

The Scarlett Solo 4th Generation suits recording one vocal microphone per take, while the Scarlett 2i2 4th Generation has two microphone preamps for recording at the same time.

  • Focusrite says the Scarlett 2i2 4th Generation features Auto Gain, Clip Safe and direct monitoring.
  • On the Scarlett 2i2, a jack input disables the corresponding XLR input, so don’t count them twice.

Audient

The iD4 MKII has one microphone preamp, while the iD14 MKII has two and offers a cue route for more advanced monitoring.

  • Audient lists direct monitoring for both models and a separate cue assignment for the iD14 MKII.
  • According to Audient, DAW thru on the iD14 MKII bypasses the volume control. Also check that you’re looking at the iD4 MKII, not a differently named version.

MOTU

According to MOTU, the M2 combines two microphone, line or instrument inputs with a headphone output and meters for inputs and outputs.

  • The product specifications list separate level controls for the headphones and monitors.
  • Claimed latency depends on the measurement conditions and isn’t guaranteed for every computer or DAW setup.

Solid State Logic

The SSL 2+ MKII is worth considering if you need two microphone preamps, extra outputs and two headphone outputs.

  • Solid State Logic describes two independent headphone outputs and four balanced outputs.
  • Check the software settings you need; the number of outputs doesn’t prove that every cue mix you want will be available automatically.

Behringer

According to Behringer, the UMC204HD has two microphone preamps, an adjustable headphone output and a mix control for live input and computer playback.

  • Behringer also lists MIDI and extra playback outputs.
  • These features aren’t necessarily needed for mixing existing vocal tracks. For Windows, check which driver suits your setup.

Joybuy products

Related products will be available soon.

Frequently asked questions

Do you need two microphone inputs to mix pre-recorded harmonies?

No, not for mixing files that are already on your computer. Focus on playback, headphone controls and compatibility; the number of microphone inputs only matters if you’re also recording new vocals.

Why can you hear your voice twice while overdubbing?

With direct monitoring, you may hear both the direct input signal and a delayed version through your DAW. If you’re using the direct route, switch off software input monitoring.

Is a second headphone socket enough for a separate singer’s mix?

Not necessarily: the interface needs to provide independently assignable outputs, and your software needs to be able to assign them. Audient describes a cue assignment for the iD14 MKII; bear in mind that, according to Audient, DAW thru bypasses the volume control.

Can you turn up your headphones for a long time to hear more detail?

Don’t rely on turning up the volume instead of setting up your monitoring appropriately. The World Health Organization warns that the risk to your hearing depends on sound level, duration of exposure and how often you’re exposed to loud sound; the position of a knob doesn’t measure the sound level reaching your ears.

What product safety requirements apply to an audio interface in the Netherlands?

According to the Dutch government, electrical and electronic products placed on the market must meet the applicable European safety requirements. CE marking is compulsory for products that fall into a product group requiring it; a brand name or list of models doesn’t prove that a specific item for sale meets those requirements.