Mixer who mainly uses headphones
You edit existing soundtrack files at a single desk and want to listen to your stereo mix without any fuss. Extra recording channels aren’t your main consideration.
When mixing existing soundtrack files, an interface with a suitable headphone output and a connection that works with your computer is usually enough; extra recording inputs aren’t essential. Choose additional outputs or configurable mixes if you genuinely need separate listening or signal routes. Also check the space needed for cables and the power requirements of the exact model. Manufacturer specifications aren’t an independent listening comparison.
You edit existing soundtrack files at a single desk and want to listen to your stereo mix without any fuss. Extra recording channels aren’t your main consideration.
For example, you want to connect monitors as well as a separate analogue output or create your own headphone mix. The number of physical outputs and the routing options determine whether an interface suits your signal plan.
You need to fit the interface, connected plugs and room to operate it on a small work surface. Choose connections you’ll actually use and leave enough room for cables.
When mixing existing files, start by deciding how you want to listen. Then work out which extra routes, desk space and computer connections you need.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Listening to a stereo mix | Check the headphone socket, plug size and whether the volume is easy to adjust. If you use speakers, also check the monitor outputs. | If I mainly assess existing files through headphones or a pair of monitors, I want a direct listening route. Around 31% of consumers make stereo monitoring their top priority. |
| Separate output routes | Work out which signals need to go to which destinations at the same time. Check both the number of line and headphone outputs and the routing options on the model. | If I want to use my monitors alongside another analogue destination or my own headphone mix, the interface needs to support those routes. Around 31% of consumers prioritise multiple output routes. |
| Space for the interface and cables | Measure the available space and allow for plugs, controls and connections at the front and back. Check the dimensions of the exact model. | At a small desk, I want to be able to reach the controls without connected cables getting in the way. Around 23% of consumers make desk space their top consideration. |
| Computer and USB power | Check compatibility with your operating system, drivers and DAW. Also make sure the port or hub you’ll use provides enough power for your chosen model. | If I want to keep using my existing computer, the connection, software and power requirements need to be compatible. Around 15% of consumers make computer compatibility their top priority. |
According to MOTU, the RCA outputs on the MOTU M4 are mirrored. So the number of connections on the unit doesn’t automatically tell you how many independent mixes you can route.
Work out in advance which stereo and headphone routes you need to use at the same time, then check the routing on the exact model.
If the route you want isn’t possible, you may need additional equipment or different cables.
The Audient iD14 MKII’s optical ADAT connection is an input; it doesn’t replace a built-in analogue line output.
Count analogue line outputs, headphone outputs and digital inputs separately when planning your signal routes.
Otherwise, you may need an extra device for the analogue route you want.
Audient specifies a USB 3.0 connection supplying at least 900 mA for full bus power on the iD14 MKII.
Check the power available from the computer port or hub you’ll actually use.
You may need a suitable port or an appropriate power solution.
The dimensions MOTU gives for the M4 are for the unit itself. Connected cables and room to use the controls also need to be taken into account.
Measure the available surface and allow for the direction of plugs and cables at the connection points.
Your chosen setup may require longer cables or cables routed differently.
The Scarlett 2i2 4th Gen is an option for stereo monitoring, while the Scarlett 4i4 4th Gen is worth considering if you need more line outputs and separate mixes.
The M4 is worth a look if four balanced TRS line outputs and the available desk space suit your setup.
The iD14 MKII may suit you if you need two headphone sockets, four line outputs or a digital expansion input.
The Babyface Pro FS is worth researching if you’re looking for the desktop controls, TotalMix FX routing and optical connection described by RME.
The UR22C is a two-channel option worth considering if MIDI and a monitor mix function suit the way you work.
Not if you’re only playing and assessing existing files. Start with the headphone and monitor outputs you need, then decide whether you also want to record external sources.
Check that the exact model has both the physical outputs you need and the right signal routing. Focusrite describes separate mixes for the Scarlett 4i4 4th Gen; Audient describes assignment via the routing matrix for the iD14 MKII.
For full bus power, Audient specifies a USB 3.0 connection supplying at least 900 mA. So check the power available from the laptop port or hub you’re using, and make sure the software is compatible with your computer.
According to Arboportaal, employers must provide hearing protection when daily exposure exceeds 80 dB(A). Above 85 dB(A), employees must wear it and employers must take action. These rules cover exposure at work; they don’t automatically determine a suitable volume level for mixing at home.
For eligible distance sales, the Dutch Government generally provides a 14-day cooling-off period, with some exceptions; purchases from private sellers aren’t covered by the same rules. If a product is faulty, the Dutch Government says you should contact the seller about your statutory guarantee. A manufacturer’s warranty is in addition to this.