Creator with separate theatre channels
You want to monitor more than the final stereo mix at home. Decide which channels need to go to separate physical outputs; QLab explains how to assign cue outputs to the outputs of an audio device.
For a single stereo mix, a stereo interface may be enough. For separately routed theatre channels, you’ll need enough independent physical outputs and the right software routing. First count the signals that need to play separately at the same time, then check the headphone output, computer compatibility and connections on the exact model.
You want to monitor more than the final stereo mix at home. Decide which channels need to go to separate physical outputs; QLab explains how to assign cue outputs to the outputs of an audio device.
You mainly listen to a single stereo mix through monitors or headphones. Check whether two line outputs and the headphone output suit your workflow, without counting extra outputs as independent routes.
You use a specific computer and DAW, and may switch between headphones, monitors or recording sources. So check that the connections, power requirements and compatibility of the exact model suit your own equipment.
Choose this if: you only monitor a stereo mix through one listening route.
Bear in mind: on some models, the line and headphone outputs share the same signal feed; check whether you need different signals.
Choose this if: you want to send signals to, for example, two separate stereo destinations, and your software supports the routing you need.
Bear in mind: four outputs won’t be enough if you want to send more than four separate analogue channels at the same time.
Choose this if: you need several listening routes, extra inputs or a specific plan for digital expansion.
Bear in mind: a digital input or software routing doesn’t automatically give you an extra analogue output; check the entire signal path.
| Consideration | What should you check? | Who is this important for? |
|---|---|---|
| Separate theatre and listening routes | Count the physical outputs and check whether your DAW can route the channels you need separately. QLab uses output patches to assign cue outputs to device outputs. | If I want to send theatre channels and a listening route separately at the same time, I first count the connections I need. Around 36% of consumers make independent outputs their top purchasing priority. |
| Monitoring a stereo mix | Check whether the headphones and line outputs receive the same or different signals. Focusrite describes a shared signal feed for the Scarlett 2i2 4th Gen; MOTU specifies mirrored RCA outputs on the M2. | If I mainly monitor one stereo mix, I want suitable connections without unnecessary outputs. Around 29% of consumers give a single stereo listening route their top priority. |
| Computer and software compatibility | Compare the system requirements and USB power requirements of the exact model with your computer. Also check whether your DAW or, if you use it, QLab supports the output route you need. | If I want to keep using my existing computer and software, I check that combination before making my choice. Around 21% of consumers prioritise compatibility with their existing system. |
| Recording inputs | Count the sources you want to record at the same time and check whether they require microphone, line or instrument inputs. | If I want to record vocals or instruments as well as mix, I choose the number and type of inputs accordingly. Around 14% of consumers give suitable recording inputs their top priority. |
On the Focusrite Scarlett 2i2 4th Gen, the headphone and line outputs share the same signal feed. On the MOTU M2, the RCA outputs mirror the line outputs, so don’t count them as an additional independent stereo route.
Write down which signals need to sound different at the same time, then count the independent physical outputs on the exact model.
A cue output must be assigned to an output on the audio device. The Audient iD14 MKII’s optical ADAT connection is an input; on its own, it doesn’t show that extra analogue outputs are available.
Compare your channel list with the physical analogue outputs explicitly listed, and check which routing your software supports.
Techboer describes its ranking dated 21 October 2026 as catalogue research, not a hands-on test. So a place on that list doesn’t show that a model can handle separate theatre channels.
Assess the number of outputs, routing and compatibility for your own set-up before you buy.
The Scarlett 2i2 4th Gen is designed for a stereo route; the Scarlett 4i4 4th Gen offers four physical line outputs.
The M2 is an option for stereo; the M4 has four analogue line outputs.
The iD14 MKII is worth looking into if you need four line outputs, two headphone connections or a digital input.
The SSL 12 is worth considering if alternative monitor options or cue mixes are relevant to you.
The Babyface Pro FS is worth looking into if configurable internal routing and digital expansion are relevant to you.
No, not if you combine the tracks into a single stereo mix in software. If you want to send channels separately to external destinations, check how many physical outputs are available and how your software assigns cue outputs to them.
On a Mac with the applicable QLab audio licence, select the device in the audio output patch and route cue outputs to device outputs. Test each channel separately before relying on the set-up.
Compare the plugs with the connections on the exact model, and check whether the headphones and monitors receive the same or different signals. Also check the USB power requirements and follow the device’s care and safety instructions.
According to the Rijksoverheid, many distance purchases come with a 14-day cooling-off period, subject to exceptions. Check who the seller is and which terms apply to the specific purchase. This cooling-off period is about cancelling a purchase; it isn’t the same as a remedy for a faulty product.
Also check the EU declaration of conformity when one is required for the product. Business.gov.nl describes the applicable product requirements and the declaration for electrical and electronic equipment that is subject to this requirement.