If your tapes have already been digitised, you don’t need any extra recording inputs. Focus instead on a suitable headphone connection, volume control and compatibility with your computer. If you also want to record stereo tapes, check that the interface has two line inputs you can use simultaneously and that they match your tape recorder’s outputs. Noise reduction is handled by audio software; Audacity recommends listening to the original, the processed result and, if needed, the removed residual signal.
Who is this interface guide for?
Listener with digitised tapes
You want to hear in a quiet room whether noise reduction also affects speech or music. Audacity describes listening to the removed residual signal as a way to check what has been filtered out of the sound you want to keep.
Stereo tape digitiser
You want to record the left and right channels simultaneously, then compare the unprocessed file with the processed version. Audacity explains how to connect a tape recorder’s line outputs to line inputs, and recommends checking the recording levels.
User with multiple listening options
Alongside assessing recordings, you want to use extra outputs or two headphone connections. Check the routing you need and, for a bus-powered model, the power supplied by your computer port.
What should you look for when choosing?
First, decide whether you’re only assessing existing files or also want to record analogue stereo tapes. Extra listening options matter most if you’ll actually use those connections.
| What to consider |
What should you check? |
Who is this important for? |
| Audible processing artefacts |
Check the headphone connection and the volume control you need; compare the original and the result in audio software. |
If I want to assess an existing recording in peace, I need to hear whether the processing also removes speech or music. Around 39% of consumers say checking for possible processing artefacts is their top priority. |
| Recording stereo tapes |
Check for two line inputs that can be used simultaneously, the recorder’s outputs, suitable cables and the recording meters. |
If I want to capture both channels from a tape recorder, the left and right connections need to be right. Around 31% of consumers prioritise digitising stereo tapes. |
| Multiple listening options |
Count the physical outputs you need and check which signals the model can route separately. |
If I want to connect more than one listening setup, I need to know whether the outputs support the routes I need. Around 15% of consumers say extra listening options are their top priority. |
| Computer and workspace |
Check the system requirements, any USB power requirements, connectors and the space needed for controls and cables. |
If my computer and desk limit my setup, I need to know in advance whether the connections and controls will fit. Around 15% of consumers make computer and desk compatibility their top priority. |
Common buying mistakes
-
Assuming ‘two inputs’ means two usable line inputs
The total number of inputs doesn’t necessarily tell you whether you can record a stereo line signal. According to Focusrite, the Focusrite Scarlett Solo 4th Gen has one mono line input.
Check the type of input available on the exact model and whether two suitable inputs can be used at the same time.
For stereo recording, you may need a different model or an additional connection solution.
-
Assuming a quieter result is automatically a better restoration
Noise reduction can also affect the sound you want to keep. Audacity describes listening to the removed residual signal as a useful check.
Keep the unprocessed file and compare the original, the result and, if needed, the residual signal.
-
Confusing direct monitoring with processed playback
Direct monitoring lets you hear the incoming signal; it doesn’t automatically let you hear how the software processing sounds afterwards.
Use direct monitoring while recording, then play back the original and processed files through your audio software.
-
Checking only the interface, not the connection you need
A tape recorder’s line outputs and an interface’s inputs may use different connectors.
Check both ends of the connection and make sure your existing headphone plug will fit.
You may need suitable audio cables or a headphone adapter.
Brands to consider
Focusrite
The Scarlett 2i2 4th Gen is an option if you want two line inputs; the Scarlett 4i4 4th Gen also offers separate mixes for the headphones and line outputs.
- Focusrite specifies two line inputs for the Scarlett 2i2 4th Gen.
- The 4i4’s extra mixing options aren’t essential for assessing files that have already been digitised. The Scarlett Solo 4th Gen has one mono line input.
MOTU
The M2 is designed for anyone who wants two mic/line inputs, clear level metering and separate monitor and headphone controls.
- MOTU lists two combo inputs for mic, line or Hi-Z signals.
- MOTU’s comparative sound-quality claims don’t prove that the M2 makes tape-noise removal more audible than another suitable interface.
Behringer
The U-PHORIA UMC202HD is a two-channel option for recording analogue signals in stereo.
- Behringer lists two combo inputs that accept line signals.
- Promotional claims about the preamps don’t show that the model removes noise or makes it easier to assess restorations.
Audient
The iD14 MKII may suit you if you want to use two headphone connections or extra line outputs.
- Audient lists two headphone connections and four line outputs; check that the routing suits your setup.
- For bus power, Audient requires a USB 3.0 connection supplying at least 900 mA.
Steinberg
The IXO22 may suit you if you want to monitor the inputs directly in stereo while recording.
- According to Steinberg, the IXO22’s direct monitoring can switch between mono and stereo.
- Direct monitoring lets you hear the input signal; it doesn’t replace playing back a file that has been processed later in audio software.
Joybuy products
Related products will be available soon.
Frequently asked questions
Does the audio interface remove tape noise itself?
Noise reduction is handled by audio software, not by the interface’s recording and playback features described here. Audacity explains how to use a noise profile and recommends listening to the result and, if necessary, the removed residual signal. Heavy or variable noise can be difficult to remove.
How do I connect a tape recorder and avoid clipping?
Where available, use the tape recorder’s line outputs and suitable cables to connect to two line inputs if you want to record in stereo. Make a test recording and check the meters; Audacity gives a maximum peak of around −6 dB as a practical guide.
Can I use direct monitoring to assess what the noise reduction has done?
No. Direct monitoring lets you hear the incoming signal while recording. To assess the results, play back the original and processed files through audio software and, if you like, listen to the removed residual signal too.
What guarantee and cooling-off period apply to online purchases in the Netherlands?
According to the Dutch government, when you buy as a consumer you’re entitled to a product that works properly, and you should contact the seller if there’s a problem. For distance purchases, a 14-day cooling-off period applies in many cases, with some exceptions. Check the terms that apply to your purchase.