Who is this choice relevant to?

Comparing existing tape recordings

If you already have digital recordings, you don’t necessarily need extra recording inputs for this listening task. The Audacity Manual describes listening to the removed signal as part of assessing noise reduction.

Digitising stereo tapes

If you want to record the left and right channels separately, check that the interface has two simultaneous line inputs. The Audacity Manual recommends trying a line input first when connecting audio equipment.

A setup with few power sockets

USB power can eliminate the need for a separate power supply for your interface, but the USB power required varies by model. Focusrite and Audient specify particular requirements for their interfaces.

What should you look for?

What to consider What to look for Who is this most important for?
Recording a stereo signal Check for two simultaneous line inputs, the recorder’s outputs and suitable cables. Set your recording software to stereo. I want to capture the left and right channels of my tape separately. Correct stereo recording is the top priority for around 31% of consumers.
USB power Compare the power requirements of the exact model with the power supplied by your computer port. Focusrite and Audient specify USB requirements for each model. I don’t want to use a separate power socket for the interface, and I want to know in advance whether my USB port will be sufficient. Around 31% of consumers prioritise this.
Assessing noise reduction Look for a useful headphone output and compare the original with the software-processed version. The Audacity Manual also describes listening to the removed signal. I want to hear whether noise reduction also affects the sound I want to keep, even when the tape is already digital. This is a top priority for around 25% of consumers.
Connections and aftercare Choose based on how many sources you’ll connect at once, and check which cables are included. Also find out who to contact if a product doesn’t work as it should. I don’t want to pay for connections I won’t use, and I want to know in advance what aftercare is available. Around 13% of consumers prioritise this consideration.

Pitfalls to avoid

  • Mistaking one input for a stereo line input

    You need two channels to record the left and right sides separately. A microphone input or a single mono channel doesn’t automatically replace two line inputs.

    Check the number of simultaneous line inputs and the physical outputs on your tape recorder.

  • Assuming USB power works with every port

    Requirements vary by model. So an interface that can be powered over USB won’t necessarily work from every computer port without an additional power supply.

    Compare the USB requirements of the specific model with what your computer port can provide.

  • Confusing direct monitoring with comparing audio in software

    Direct monitoring lets you hear an incoming signal; it’s not the same as listening to the processed recording. Noise reduction can also remove sound you want to keep.

    Compare the original recording with the processed version in your software, and listen to what the feature removes if needed.

Relevant brands to consider

Focusrite

According to Focusrite, the Scarlett 2i2 4th Gen is designed for a stereo source connected via two mono line inputs, with listening through the headphone output.

  • Focusrite describes stereo direct monitoring and power via a computer.
  • If your computer doesn’t supply 1.5 A over USB-C, Focusrite specifies an optional 5V power supply. So check the power available from your port.

MOTU

The M4 is an option if you want to use additional analogue inputs or line outputs alongside a stereo source.

  • MOTU specifies two combo inputs, two additional line inputs, USB bus power and a headphone output.
  • The extra inputs may go unused if you’re recording a single stereo tape. These connections alone don’t tell you anything about the sound quality of noise reduction.

Audient

The iD14 MKII may suit a USB-powered listening setup where multiple listening outputs are useful.

  • Audient specifies two headphone outputs and four line outputs.
  • According to Audient, bus power requires at least USB 3.0 with 900 mA. The manufacturer says a USB-C port supplying 1.5 A provides more headphone power.

PreSonus

The Studio 24c has two mic, instrument or line inputs and a control for blending the input signal with computer playback.

  • PreSonus specifies USB bus power, a headphone output, and included USB-C-to-USB-C and USB-C-to-USB-A cables.
  • The Mix control blends the live input signal with computer playback; it isn’t a built-in feature for removing tape hiss.

Products on Joybuy

Related products coming soon.

Frequently asked questions

Does an audio interface remove noise from a cassette tape by itself?

The interface doesn’t do this through the connection and power features described. Audacity describes noise reduction as a software process that uses a noise profile and a preview; also check whether it removes sound you want to keep.

How do I connect a stereo tape recorder?

If your recorder has a suitable stereo line output, connect the left and right channels separately to two line inputs and set your software to stereo. Before buying, check the output type on your recorder and which cables are suitable.

How can I avoid clipping and make a fair comparison?

Set the recording input level before you record; the Audacity Manual recommends a maximum peak of around −6 dB on the recording meter as a practical guide. First, save an unprocessed WAV or AIFF copy, then create a processed version.

Does a USB-powered interface mean I won’t need a power socket at all?

Not necessarily: a suitable computer port can power the interface, but a tape recorder, computer or active speakers may still need their own power. For the iD14 MKII, Audient specifies at least USB 3.0 with 900 mA; for the Scarlett 2i2 4th Gen, Focusrite specifies an optional 5V power supply if the computer doesn’t provide 1.5 A over USB-C.

What do CE marking and the warranty mean when buying in the Netherlands?

The CE requirements depend on the specific product and the rules that apply; the NVWA provides information on when CE marking is mandatory. The Dutch government says you’re entitled to a product that works properly, that there is no fixed statutory warranty period in the Netherlands, and that you should contact the seller if there’s a problem.