Who is this guide for?

Digital tape restorer

You switch between original and edited files and want to assess residual noise and new processing artefacts without changing the playback route. iZotope describes tape hiss as a type of noise found in analogue recordings; Focusrite explains how direct monitoring sends the input straight to the outputs.

Someone who also digitises tapes

You want to record an analogue stereo source across two channels as well as listen back to it. In that case, two line inputs that can be used at the same time are important; MOTU and Focusrite document these inputs for the M2 and Scarlett 2i2 4th Gen.

Someone who listens with others

You want to listen with someone else or use different playback routes. For the SSL 2+ MKII, Solid State Logic documents two independent headphone outputs with separate volume controls.

What to consider when buying

Start with the playback route for existing files. Only add requirements for stereo recording or listening with others if you actually need those features.

What to consider What should you check? Who should pay particular attention?
Comparing the original and edited versions Check the headphone or monitor output, the volume control and computer compatibility. Use the same playback route for both versions. When I switch between the original and edited file, I want to hear the output from my editing software every time. Around 33% of consumers say this is their main reason for buying.
Stereo recording Check whether two inputs can handle line level at the same time, and which cables will fit your tape machine. If I want to digitise analogue tapes myself, I need to be able to record left and right simultaneously. For around 27% of consumers, transferring in stereo is the main reason for buying.
Controls at a sit-stand desk Check that controls and connections are easy to reach, and that cables can move freely at both desk heights. When I use my listening setup at different desk heights, I want the controls within easy reach and the cables connected without being pulled tight. This matters most to around 20% of consumers.
Listening with others Count headphone outputs separately from line outputs, and check what each output receives. If I want to listen at the same time as someone else, I need enough headphone connections and the right routing. Around 20% of consumers cite listening with others or additional routing as their main reason for buying.

Common buying mistakes

  • Confusing direct monitoring with the processed output from your software

    According to Focusrite, direct monitoring sends the incoming signal straight to the headphone or line outputs. That won’t automatically let you hear the processed output you want to assess.

    Check that your headphones play the output from your editing software.

  • Assuming any two inputs will work as stereo line inputs

    For stereo recording, the left and right channels need to come in simultaneously through suitable inputs. Audient specifies one microphone preamp and one instrument input for the iD4 MKII; that’s not the same as having two suitable line inputs.

    Before connecting a tape machine, check whether both inputs on the model can handle line level at the same time.

  • Assuming a higher maximum resolution means you’ll hear better restoration results

    The maximum bit depth or sample rate alone doesn’t tell you how well you’ll hear residual noise or processing artefacts in your setup.

    First, consider the listening connections and routing you need, and the source you actually want to assess.

  • Counting line outputs and headphone outputs together

    According to Solid State Logic, the SSL 2+ MKII has four balanced outputs and two separate headphone outputs. These are different types of connection.

    Count each type of connection separately, and check the routing if two people will be listening at the same time.

Brands to consider

Focusrite

The Scarlett 2i2 4th Gen is worth considering for computer playback through headphones and, if you also want to record, stereo input through two line inputs.

  • Focusrite documents separate headphone controls and two mono line inputs.
  • The headphone output isn’t a second, independently routed stereo mix.

MOTU

The M2 is suited to anyone looking for front-panel meters, separate monitor and headphone controls, and two inputs that can handle line level.

  • MOTU specifies two mic/line/guitar combo inputs.
  • According to MOTU, the specified 120 dB dynamic range applies to the balanced line outputs; it isn’t a listening test or proof of better noise-removal assessment. The M2 has one headphone output.

Audient

The iD4 MKII may suit a compact playback and recording setup if stereo input from a tape machine isn’t a key requirement.

  • Audient lists two headphone connections, loopback and USB bus power.
  • Audient specifies one microphone preamp and one instrument input; don’t assume it has two suitable stereo line inputs.

Solid State Logic

The SSL 2+ MKII is worth considering if two people want to listen separately through headphones or you need extra line outputs.

  • Solid State Logic documents two independent headphone outputs with their own volume controls, as well as four balanced outputs.
  • You won’t need those extra outputs for every solo listening session. According to the manual, use with Windows requires an SSL driver.

Steinberg

The UR22C is worth considering if, alongside playback, you want to compare two inputs and the documented monitor mix and loopback features.

  • Steinberg specifies 2-in/2-out and support for 32-bit/192 kHz.
  • The maximum file and conversion specifications alone don’t show that tape hiss will be easier to assess.

Related products on Joybuy

Related products coming soon.

Frequently asked questions

Does an audio interface remove tape hiss itself?

No. An audio interface handles audio input and output; noise removal is done in editing software. iZotope describes tape hiss and potential processing artefacts as separate things to assess while listening.

Is direct monitoring suitable for assessing the result of a noise-removal plug-in?

Not as your only listening route: according to Focusrite, direct monitoring sends the incoming signal straight to the outputs. To hear the processed result, listen to the output from the relevant software and check the routing.

What should I consider with a sit-stand desk?

Check that the connections on your chosen model are suitable for your headphones, monitors and computer. Also check at the desk’s lowest and highest positions that cables and plugs can move freely.

What rights do I have as a Dutch consumer when buying online?

For eligible distance sales, you’ll often have a 14-day cooling-off period. Your statutory rights if a product is faulty are separate; in that case, contact the seller. Check the terms that apply to your specific purchase.

What do European electromagnetic compatibility rules mean for an audio interface?

The European EMC Directive covers electromagnetic interference from electrical and electronic equipment. Audio specifications alone don’t show whether a particular model meets all the applicable requirements; check the product and seller information for details.