Who is this choice relevant to?

People digitising cassette tapes

You want to capture the left and right channels of a tape recording through suitable line inputs, rather than using the microphone input for your deck. The Audacity Manual describes using a line input with this type of equipment.

People assessing noise reduction

You compare the original and edited versions by ear, and perhaps using a waveform or spectrogram. The Audacity Manual explains noise reduction for sources including tape hiss, as well as how the spectrogram displays frequency content.

People using two sets of speakers

If by ‘two screens’ you mean two sets of audio monitors, you may need separate audio outputs. That’s a different connection requirement from using two computer screens.

What should you look for when buying?

Start with the signal path from your cassette deck and how you want to assess the recording. The Audacity Manual recommends using a line input for a line-level signal and warns that noise reduction can also change the audio you want to keep.

What to consider What to look for Who is this important for?
Recording stereo tape correctly Check for two suitable line inputs, the output on your deck and the cable you’ll need. Pay attention to the input level when setting up. If I’m digitising a stereo deck, I want to capture the left and right channels through suitable line inputs and set the level correctly. Around 36% of consumers say accurate stereo recording is their top priority.
Listening critically to the result Check the headphone connection and volume control. Compare the original and edited versions in your software, and listen to what has been removed if possible. If I’m assessing noise reduction, I want to hear whether it changes the music or speech too, rather than judging only by how quiet the playback sounds. Around 29% of consumers say comparing by ear is their top priority.
Connecting to a dual-screen workstation Check that the interface is compatible with your computer and operating system. Set up your computer screens with a suitable computer and display configuration. If I use two computer screens, I want my audio setup to work with my computer and editing software; the screens themselves don’t determine how many audio outputs I need. Around 21% of consumers say compatibility with their workstation is their top priority.
Running two sets of speakers Check how many outputs can be controlled independently and how you’ll adjust the volume or switch between sets. Don’t count mirrored connections as extra independent channels. If by the second ‘monitor’ I mean a second set of speakers, I want to control it independently and manage the volume. Around 14% of consumers say routing to two sets of speakers is their top priority.

Common pitfalls

  • Connecting a cassette deck to a microphone input

    A line-level signal can overload a microphone input and spoil the recording. The Audacity Manual warns against choosing the wrong input.

    Before buying, compare your deck’s output with the interface’s line inputs and check which cable you’ll need.

    You may need a suitable cable or an interface with line inputs.

  • Assuming a quieter spectrogram means better audio

    Strong noise reduction can also alter music or speech you want to keep; a visually cleaner result doesn’t tell the whole story.

    Compare the original and edited versions by ear, and use your software’s preview or residual listening feature if available.

  • Counting connections as if they were independent outputs

    According to MOTU, the RCA outputs on the MOTU M4 mirror the TRS outputs. On the Arturia MiniFuse 2, the headphone output mirrors the monitor output.

    Check the independent routing and controls, not just the number of physical connections.

    To run two separately controlled sets of speakers, you may need a different output or monitor-control setup.

Brands to consider

Focusrite

The Scarlett 2i2 4th Gen is designed for stereo recording and monitoring through a single stereo output pair.

  • Focusrite specifies two line inputs, two balanced analogue output channels, and separate volume controls for the headphones and main output.
  • The specifications don’t describe two separate stereo pairs. Focusrite’s performance figures are manufacturer data, not independent comparative measurements.

MOTU

The M4 is worth considering if you want more analogue output-routing options alongside stereo recording.

  • MOTU specifies two combo inputs, two additional line inputs, four balanced TRS outputs and output meters.
  • According to MOTU, the four RCA outputs are mirrored, so don’t count them as extra independent outputs. Its published audio performance figures are manufacturer data.

Arturia

The MiniFuse 2 is designed for a compact stereo setup with active speakers and headphones.

  • Arturia specifies combo inputs and balanced monitor outputs. The headphone output has its own volume control.
  • According to Arturia, the headphone output mirrors the monitor signal. So a separate volume control doesn’t mean you get a separate comparison mix.

PreSonus

The Studio 24c combines input and output meters with direct-monitoring controls.

  • PreSonus specifies two balanced main outputs, a headphone output and a mix control for direct monitoring.
  • Check that the inputs, cables and monitoring controls suit your deck and workflow.

Joybuy products

Related products coming soon.

Frequently asked questions

Does an audio interface remove tape hiss by itself?

No. Noise reduction happens in suitable editing software. The Audacity Manual explains how to reduce noise using a noise profile and warns that the process can also affect sounds you want to keep.

How do I connect a cassette deck?

Ideally, use the deck’s line-out, tape-out or record output and two suitable line inputs on the interface. Check the connectors on both devices and don’t connect a line-level signal to a microphone input; the Audacity Manual warns that this can overload the input.

Do I need four audio outputs for two computer screens?

No, not just because you have two computer screens. Four output channels may be useful if, for example, you want to run two stereo speaker sets independently. If so, check the routing and volume controls too.

What returns and warranty rights apply to an online purchase in the Netherlands?

According to ACM ConsuWijzer, online product purchases usually come with a statutory cooling-off period of up to 14 days after delivery, with some exceptions. The statutory guarantee is separate from any manufacturer’s warranty. If a product doesn’t meet reasonable expectations under normal use, contact the seller to arrange a solution.

How should I dispose of an old audio interface?

For electrical equipment owned by individuals, the Dutch government lists options including handing it in when buying a similar new device or taking it to a municipal recycling centre. According to that source, the take-back scheme also applies to online purchases; the same rules for individuals don’t necessarily apply to businesses.