Who is this for?

Listener of restored tapes

You already have the recording as a digital file and want to check whether noise reduction also affects sounds you want to keep. Recording inputs are mainly useful if you plan to digitise tapes again in future. Audacity describes listening to the result as a way to assess what the processing does to the sounds you want to keep.

DIY digitiser

You want to record a stereo cassette and compare the original recording with the processed version. This requires a suitable stereo recording setup. Audacity describes a workflow for digitising tapes and recommends using suitable outputs from the source device.

Daylight worker

You work beside a bright window and want to check recording or playback levels. A physical meter and a movable software meter are different options, but the mention of meters doesn’t tell you whether a display will remain readable in the light at your workstation. Audacity describes meters for recording and playback.

What should you look for when buying?

First decide whether you’ll only be listening to existing digital files or also recording stereo tapes. That will determine whether you need two line inputs.

What to consider What to look for Who it matters more to
Comparing processed audio Check whether you can listen to your computer’s playback through the headphones and adjust the volume. Look for a monitor mix that can also play the direct input signal. If I want to hear what noise reduction does to the recording, I need to be able to compare the processed playback clearly with the original. Around 33% of consumers say critical comparison is their top priority.
Reading levels in daylight Compare physical meters with software meters, and check where they’ll sit in relation to the light at your workstation. An LCD with meters doesn’t prove it will be readable beside a bright window; MOTU documents the meters on the M2 screen, and Audacity describes software meters. If you work beside a bright window, you’ll want to check levels without reflections making them difficult to read. Around 27% of consumers say readability in daylight is their top priority.
Recording stereo tapes Check that two line inputs are available at the same time and that the input mode suits the outputs on your cassette deck. Focusrite says to switch off instrument mode on the Scarlett 2i2 4th Gen when using line-level devices. If I want to digitise a stereo tape, I need to be able to record the left and right channels at the same time, using connections that suit my deck. Around 20% of consumers prioritise stereo transfer.
Connecting to your setup Check the computer connection you need, the plugs and how the headphone and monitor outputs work together. Audient says that connecting headphones to the EVO 4 automatically mutes the monitor outputs. If you want to use the interface with an existing computer and monitoring setup, check the connections and how you want to switch between outputs. Around 20% of consumers say connectivity and controls are their top buying priority.

Common buying mistakes

  • Confusing direct monitoring with the processed recording

    A monitor mix can play the live input signal when what you want to assess is what software-based noise reduction has done to the recording.

    Play the processed file from your computer and compare it with a saved, unprocessed recording. Check how the monitor mix switches between the input signal and computer playback.

  • Choosing a single or unsuitable input for stereo transfer

    A cassette deck with left and right line outputs needs two suitable inputs to record both channels at the same time.

    Before buying, check the deck’s outputs, the interface’s two inputs and the plugs on the cables you’ll need.

  • Assuming a built-in display is readable in sunlight

    Having meters on a display doesn’t tell you how easy they’ll be to see somewhere with bright light or reflections.

    Check where the display will sit in relation to the light at your workstation, and consider a movable software meter as an alternative.

Brands to consider

Focusrite

The Scarlett 2i2 4th Gen has two inputs for anyone who also wants to record from a stereo deck.

  • The manual describes stereo recording via inputs 1 and 2, using two front-mounted 6.35mm connections.
  • Instrument mode must be switched off for line-level devices. Also check that the position of the connections works for your cable routing.

MOTU

The M2 combines two mic, line and instrument inputs with an LCD that displays meters.

  • MOTU lists separate volume controls for the headphones and monitors.
  • Having an LCD doesn’t tell you whether the screen will be easy to read in the light from your window.

Audient

The EVO 4 has two inputs that can be linked for stereo recording.

  • Audient describes how to link the inputs for stereo recording.
  • Audient says the monitor outputs are automatically muted when you connect headphones. This matters if you need both to play at the same time.

Arturia

The MiniFuse 2 has a monitor mix control for blending the input signal with computer playback.

  • Arturia describes the control as a way to blend the input signal with the signal from the connected computer.
  • A mixed signal can make it harder to assess noise reduction. Make sure you can hear the processed playback from your computer.

Products at Joybuy

Related products coming soon.

Frequently asked questions

Does an audio interface remove tape hiss by itself?

The connection and metering features described don’t remove tape hiss by themselves. Audacity describes noise reduction as a software process; afterwards, listen for any sounds you want to keep that may have been affected.

How do I connect a cassette deck for stereo transfer?

Where possible, connect the deck’s line or tape outputs to two suitable line inputs, one for each channel, using cables that fit both devices. Focusrite’s manual explains that each of the Scarlett 2i2 4th Gen’s two inputs records one mono channel, and that instrument mode must be switched off when using a line-level device.

Can I digitise a copyrighted music cassette and share the recording?

According to the Government of the Netherlands, you can make a private copy for your own use, but you must not distribute it or make it available to the public. This applies to personal use; for other situations, check what permission is required.

What warranty and cancellation period apply to an online purchase in the Netherlands?

If a product is faulty, the seller is your point of contact for the statutory warranty; the Government of the Netherlands says there is no fixed statutory time limit for this in the Netherlands. For online purchases from a business, a 14-day cancellation period applies in many cases. Check the terms of your specific purchase.