Who is this choice for?

Student digitising stereo cassettes

You want to connect a cassette deck and assess how noise processing affects both channels. Audacity explains how to connect equipment to digitise tapes.

Critical headphone listener

You already have the recording as a file and want to compare the original, the processed version and any unwanted side-effects in a small or shared room. Audacity recommends listening to the filtered-out noise, too.

Careful first-time buyer

You only want to pay for connections that suit your workflow, and you want to check in advance that the interface will work with your computer.

What should you look for when buying?

Listening to existing files

Choose this if: your recording is already on your computer and you mainly need a decent headphone output and volume control.

Trade-off: extra recording inputs won’t replace software processing. First compare the interface with the playback equipment you already have.

Digitising stereo cassettes

Choose this if: your deck has a stereo output and you want to record both channels at the same time. Look for two suitable line inputs and a headphone output.

Trade-off: having the right connections alone won’t guarantee better noise processing. Check the cables, input level and computer compatibility, too.

Playback or connecting a mono source

Choose this if: you don’t need to record stereo line audio at the same time and headphone playback is your priority.

Trade-off: don’t assume that different types of input automatically make a suitable stereo pair for a cassette deck.

First decide whether you’ll only be playing files or recording cassettes too. Then check the connections and how you’ll listen back.

What to consider What should you check? Who is this important for?
Stereo transfer without using the wrong input Check that there are two line inputs you can use at the same time, and that the cables match your deck’s output. If I connect a stereo deck, I want to record left and right at the same time without routing the line signal through a microphone input. Around 31% of consumers put stereo transfer first when choosing what to buy.
Hearing what the processing removes Use the same playback setup to compare the original, the processed version and the filtered-out noise you can listen to. If I want to check that musical detail is preserved, I want to compare the processed recording carefully through my headphones. Around 31% of consumers prioritise critical listening on headphones.
Avoiding unnecessary features First note whether you’ll be playing files, recording mono or transferring a stereo deck. Then compare the connections. For my student room, I only want to buy features that suit the listening or recording workflow I’ve chosen. Around 25% of consumers prioritise a focused, minimal set-up.
Connecting to your computer Check the requirements for the exact model, the USB port available and the cable you’ll need. If I want to use the interface with my own computer, I want to know in advance whether the connection and software support are suitable. Around 13% of consumers make computer compatibility their top buying priority.

Common pitfalls

  • Connecting a cassette deck as if it were a microphone

    A deck can deliver a stronger line-level signal than a microphone. Audacity warns that a microphone input can amplify this signal too much.

    Check the deck’s output and use a suitable line input and cable.

    Allow for suitable cables and possibly a new recording if the wrong connection overloads the signal.

  • Assuming two inputs are two equivalent line inputs

    For the Audient iD4 MKII, Audient describes a microphone/line path as well as an instrument input. So the number of inputs alone doesn’t tell you whether there’s a suitable stereo pair for a cassette deck.

    Check what each input is for and which connections your source requires.

  • Assuming higher interface specifications mean better noise processing

    An interface’s specifications don’t tell you whether software processing will preserve the sounds you want to keep. Audacity warns that noise reduction can remove sounds you want to retain, too.

    Compare the original, the processed version and the filtered-out noise on the same section.

Brands to compare

Focusrite

The Scarlett 2i2 4th Gen is worth comparing if you want to record stereo line audio and monitor through headphones.

  • Focusrite specifies two line inputs, a headphone output and separate output controls.
  • These model specifications don’t independently guarantee better tape-noise removal.

MOTU

The M2 is worth comparing if you have two line sources and want level meters on the device.

  • MOTU specifies two mic/line combo inputs, a headphone output and a colour display with level meters.
  • Check that the system requirements and meters suit your computer and workflow.

Steinberg

The UR22C is an option for stereo recording, with additional monitoring and MIDI features.

  • Steinberg lists two inputs/outputs, Monitor Mix and MIDI.
  • These manufacturer specifications don’t prove that noise reduction will sound better.

Behringer

The UMC202HD is an option with two combined microphone/line inputs.

  • Behringer specifies two XLR/TRS inputs for sources including line-level audio, a headphone output and direct monitoring.
  • Direct monitoring lets you hear the incoming signal; it doesn’t replace listening back to the software-processed audio.

Audient

The iD4 MKII is most relevant if compact headphone playback matters more to you than having an obvious pair of line inputs.

  • Audient specifies a microphone/line path, a separate instrument input and headphone outputs.
  • For a stereo deck, don’t rely on the description ‘two analogue inputs’ alone; check what each one is for.

Joybuy products

Related products coming soon.

Frequently asked questions

Can I connect a cassette deck directly to a microphone input?

Use a suitable line input for a deck’s line output, and check the cable and levels. Audacity warns that a microphone input can amplify the stronger line-level signal too much.

How can I check whether noise reduction is removing music, too?

Compare the original and the processed version, and listen to the filtered-out noise as well. Audacity notes that this can help you assess how much wanted sound is being affected. Strong or variable noise can also be difficult to remove.

Will direct monitoring let me hear the processed result?

Not by itself: direct monitoring on the UMC202HD lets you hear the incoming signal. Behringer describes this as monitoring without noticeable delay. To hear the noise processing, listen to the output from your software.

What are my rights when shopping online in the Netherlands?

For many online purchases in the Netherlands, you have a 14-day cooling-off period, as the Dutch government explains. You’re also entitled to a product that’s fit for purpose; there’s no fixed statutory warranty period. If a product is faulty, contact the seller.

Does a CE mark prove that an audio interface sounds good?

No. CE isn’t a quality mark for audio performance. Business.gov.nl explains that manufacturers affix the mark when a product meets the applicable technical and administrative requirements. On its own, it says nothing about sound quality.