Who is this choice relevant to?

Listener with digital tape recordings

You want to check whether noise reduction also affects speech or music, and are mainly looking for a consistent way to listen to the original and edited versions. The Audacity Manual and Audacity Support explain noise reduction and the potential for artefacts.

Home digitiser

You’re recording a stereo tape and want to connect the left and right channels to your computer at the same time. Focusrite and MOTU describe interfaces with two inputs for mic or line signals.

Listener with multiple monitoring options

You listen with someone else or use several monitoring outputs. Connections vary by model; Solid State Logic and Audient describe different options for this.

What should you consider when choosing?

Keep your existing listening setup

Choose this if: you’re only assessing digital files and your current headphones or monitors work well.

Trade-off: you won’t gain any extra connections or physical volume control; an interface doesn’t perform noise reduction.

Record a stereo tape

Choose this if: you want to record the left and right outputs of a tape player at the same time. The Focusrite Scarlett 2i2 4th Gen and MOTU M2 each have two inputs for mic or line signals.

Trade-off: check your player’s output, the cables and the correct input setting for the signal level.

You need more monitoring connections

Choose this if: you regularly listen with two pairs of headphones or need extra line outputs. Solid State Logic lists two parallel headphone outputs for the SSL 2 MKII; Audient lists four line outputs for the iD14 MKII.

Trade-off: parallel headphone outputs don’t prove that you’ll get two independently adjustable mixes; extra outputs are less useful if you only use one monitoring route.

Consideration What to look for Who is this important for?
Assessing the original and edited versions Use the same output and headphones or monitors; compare at a similar volume. If I’m only assessing a digital file, I want to compare both versions using the same listening setup. Around 36% of consumers say this is their main requirement.
Recording a stereo tape Check that there are two suitable line inputs and which cables connect to the player’s outputs. When digitising, I want to record the left and right channels at the same time, without choosing the wrong input. Around 29% of consumers give this stereo task top priority.
Monitoring outputs Check the number of headphone and line outputs, and whether they can be controlled independently. If I’m listening with someone else or using several monitoring routes, I want enough connections and to know how they work. Around 21% of consumers say this is their main concern.
Computer compatibility Compare the system requirements with your operating system, USB port and available power supply. If I want to use the interface with my existing computer, I check the connection and power requirements in advance. Around 14% of consumers say compatibility is their main concern when choosing.

Which common purchasing mistakes can you avoid?

  • Buying an interface as if it performs the noise processing

    An interface handles connections, recording and playback; noise reduction is a separate software process.

    If you’re only assessing digital files, compare them using your current equipment first and keep the playback route the same.

  • Assuming that two inputs are automatically suitable stereo line inputs

    The connections and input settings determine whether you can record the tape player’s left and right outputs appropriately.

    Compare the player’s outputs with the connections and line input options on the exact interface model; also check which cables you’ll need.

  • Confusing two headphone sockets with two independent mixes

    Solid State Logic describes the SSL 2 MKII’s two headphone outputs as parallel.

    If independent control matters, check that this feature is available on the exact model before choosing.

Which brands are worth considering?

Focusrite

The Scarlett 2i2 4th Gen is an option if you want to connect two sources and use headphones.

  • Focusrite documents connections for mic, instrument or line signals, along with headphone volume control. The manufacturer also lists an optional extra power connection if your computer doesn’t supply enough power.
  • These features won’t remove existing tape hiss; check that the connections suit your source and listening setup.

MOTU

The M2 may suit you if you want two inputs for mic or line signals and clear, visible meters.

  • MOTU specifies two mic/line combo inputs, a colour meter and one stereo headphone output.
  • The stated dynamic ranges are product specifications, not the result of an independent listening test for tape hiss.

Solid State Logic

The SSL 2 MKII is worth considering if you want to connect two pairs of headphones at the same time.

  • Solid State Logic describes two parallel headphone outputs and two switchable mic/line inputs.
  • Parallel outputs don’t demonstrate that separate listening mixes are available. Bax Music lists one headphone output for its Dutch store listing, so check the version on offer and its connections.

Audient

The iD14 MKII is an option if you need several line outputs.

  • Audient lists four line outputs and dual headphone output.
  • For USB-C bus power, Audient specifies a minimum requirement of 0.9 A at 5 V through a USB 3.0 port. Extra outputs add little if you only use one monitoring route.

Products related to this topic

Related products coming soon.

Frequently asked questions

Does an audio interface remove tape hiss?

No. An interface handles connections, recording and playback; noise reduction is a separate process. The Audacity Manual describes tape hiss as a possible target for the Noise Reduction effect. Audacity Support warns that an unsuitable noise profile can cause artefacts.

How do you compare the results of noise reduction?

Keep the original recording and compare the same passage before and after processing using the same listening route. Listen out for quiet speech or music too. For the Audacity method described, first create a noise profile from a passage containing only the relevant noise; an unsuitable profile can produce artefacts.

Which connections should you check before connecting a tape player?

Check that the player has suitable left and right outputs, that the interface has two suitable inputs and which cables you’ll need. Set the recording and playback levels before digitising a whole tape.

What are your rights regarding returns and guarantees when buying online in the Netherlands?

When you buy from a business at a distance, you generally have a 14-day cooling-off period; the Dutch Government lists some exceptions. This is separate from your statutory rights if a product doesn’t meet the terms of the agreement. According to the Dutch Government, there is no fixed statutory guarantee period in the Netherlands.