Who is this choice relevant to?

Restoring existing recordings

You already have a digital recording and want to check whether noise reduction affects speech or music too. A comfortable headphone listening setup and comparing versions in your software are the priorities. Audacity also describes listening to the removed residue as a way to check what has been filtered out.

Digitising stereo tapes

You want to record both channels from a deck, then compare the unprocessed file with the processed version. That makes the line inputs, cables and recording-level settings important. Audacity generally recommends using a suitable line output from the source.

Working with limited desk space

You want the controls and headphone socket within easy reach, and to choose extra connections only if you need them. When checking whether it will fit on your desk, allow for the space taken up by cables and plugs too.

Which buying considerations matter most?

Assessing existing files

Choose this if: the recording is already digital and you want to compare the original, the processed version and, if needed, the residue.

The trade-off: two line inputs aren’t essential for this; noise reduction is done in software.

Digitising a stereo tape

Choose this if: you want to capture the left and right channels from a stereo deck at the same time. According to their manufacturers, the Scarlett 2i2 4th Gen, MOTU M2 and Behringer UMC202HD each have two suitable inputs.

The trade-off: check the deck output, compatible cables and input levels too; a test recording can help you spot clipping.

More connections or listening options

Choose this if: extra line connections or two headphone outputs would suit your setup, for example on the Scarlett 4i4 4th Gen or Audient iD14 MKII.

The trade-off: extra connections don’t replace comparing recordings in software. For the iD14 MKII, also check that the USB port meets the stated power requirement.

Consideration What to check before buying Who is this important for?
Capturing a stereo tape without clipping Check for two line inputs that can be used at the same time, the deck’s outputs and the cables you’ll need. Make a test recording and keep an eye on the meters. If I want to transfer a stereo tape, two suitable inputs and control over the level come first. Around 36% of consumers have digitising stereo as their main priority.
Hearing what noise reduction affects Check the headphone socket and volume control. Compare the original and processed versions in your audio software, using the same listening setup. If I want to hear whether noise reduction removes sounds I want to keep, I need to be able to compare the original and processed versions clearly. Around 29% of consumers have this as their top priority.
Controls and connections on a small desk Check the stated dimensions of the unit and where the connections are; allow space for cables and plugs too. If I have limited desk space, I want to keep the controls and headphone plug within reach without unused connections getting in the way. Around 21% of consumers put space first.
A setup that works with your computer Check the system requirements for your computer, USB port and audio software, along with the cables and adaptors you already have. If I want to use the interface with my existing computer, I look for compatible connections and straightforward controls. Around 14% of consumers have compatibility and ease of use as their main priorities.

Common buying mistakes

  • Assuming an interface with ‘two inputs’ is automatically suitable for stereo

    According to Focusrite, the Focusrite Scarlett Solo 4th Gen has one mono line input; the second input is for a microphone. This means you can’t necessarily record both channels from a stereo deck at the same time.

    Check explicitly that the model has two line inputs that can be used simultaneously. Otherwise, you may still need a different interface or suitable connection equipment to digitise stereo.

  • Assuming a quieter recording is automatically a better restoration

    Noise reduction can affect wanted sounds too. Audacity recommends listening to the processed recording and, if necessary, checking the removed residue.

    Keep the unprocessed file and compare the original, the result and, if needed, the residue using the same listening setup.

  • Confusing direct monitoring with software playback of the processed recording

    Direct monitoring can let you hear the incoming signal directly, without it being processed by the computer.

    Use direct monitoring while recording. To assess noise reduction, play the recording back through your audio software.

  • Measuring only the unit itself

    The deck’s outputs and the interface’s inputs may use different types of plug. Cables and adaptors also take up space on a small desk.

    Check the connections at both ends in advance and measure the available space, including room for plugs. You may need an RCA-to-jack cable or a headphone adaptor, for example.

Brands to consider

Focusrite

The Scarlett 2i2 4th Gen is a two-channel option for stereo recording; the Scarlett 4i4 4th Gen adds dedicated line inputs and outputs.

  • According to Focusrite, the 2i2 has two line inputs and separate volume controls for the headphones and main output.
  • The extra connections on the 4i4 aren’t necessary if you’re only assessing existing files. According to Focusrite, the Scarlett Solo 4th Gen has one mono line input, so it isn’t an equivalent choice for direct stereo line recording.

MOTU

The MOTU M2 combines two mic/line inputs, meters and a headphone output for recording and listening.

  • MOTU specifies separate monitor and headphone volume controls, as well as input and output meters.
  • MOTU’s comparative sound quality claims are manufacturer claims and don’t, on their own, establish how well tape hiss can be assessed.

Audient

The iD14 MKII is worth considering if you need two headphone outputs or extra output routing.

  • Audient lists two headphone outputs, four line outputs and a monitor mixer.
  • According to Audient’s technical specifications, bus power requires at least 0.9 A at 5 V via a suitable USB 3.0 port. Check that your computer’s USB port meets this requirement.

Behringer

The U-PHORIA UMC202HD offers a two-channel option for line recording.

  • Behringer specifies two combination mic/line inputs and direct monitoring.
  • Promotional descriptions of the preamps don’t prove that tape hiss will be removed or assessed more effectively.

Steinberg

The IXO22 is an option if you want stereo direct monitoring as well as recording.

  • According to Steinberg, you can monitor the incoming signal directly in mono or stereo.
  • Direct monitoring doesn’t replace playing back the processed recording in your audio software.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need two inputs to assess tapes that have already been digitised?

No, not if you’re only playing back and comparing files. Two suitable line inputs are relevant when you want to record both channels from a stereo deck at the same time. If so, check the deck’s output and the cables you’ll need too.

Can I hear what the noise reduction has done through direct monitoring?

Not if direct monitoring sends the unprocessed input signal through to your headphones. Play the original and processed files through your audio software to assess the result; Audacity also explains how to listen to the removed residue.

What should I check when making my first cassette recording?

If possible, use a suitable line output from the deck, make a test recording and watch out for clipping. Audacity gives peaks around −6 dB on the recording meter as a practical guide. Keep an unprocessed recording before reducing the noise too.

What are my rights when buying online in the Netherlands?

ACM ConsuWijzer states that consumers generally have a statutory 14-day cancellation period after delivery for online purchases, although exceptions apply. According to the Netherlands Authority for Consumers and Markets, the seller is responsible for the statutory guarantee if a consumer product doesn’t meet what you can reasonably expect from it under normal use.

Can I digitise a copyrighted tape and share the recording?

According to the Dutch government, you may make a private copy of copyrighted material for your own use, but you may not distribute it or make it available to the public. You need permission from the rights holder to share it.