Who is this buying guide for?

Headphone mixer at a shared desk

You mainly mix existing string tracks through wired headphones and want to avoid speakers so you don’t disturb your colleagues. Check that your headphones are compatible and that the output and volume controls suit the way you work. The World Health Organization points out that both listening level and listening duration matter.

Producer who needs multiple monitoring routes

You want to use a separate mix or extra line outputs as well as your own headphones. Focusrite describes the Scarlett 4i4 4th Gen as offering separate mixes for headphones and line outputs; check that each model provides the connections and routing you need.

Arranger who also records parts

You sometimes record instruments or microphones and want to choose the number of simultaneous inputs accordingly. First, work out how many sources you’ll connect at once and how you want to monitor them while recording. An interface is no substitute for suitable acoustics when recording live in a shared office.

What should you look for in an audio interface?

Start with the monitoring route for your existing mixes; only factor in recording inputs and extra outputs if you’re actually going to use them.

What to consider What to look for Who is this important for?
Personal listening Check your headphone connection and how you’ll control the volume. The World Health Organization advises taking both volume and listening duration into account. If you listen to string mixes on headphones at a shared desk, you’ll want a suitable connection and a sensible listening level; around 36% of consumers in this buying context prioritise personal listening.
Separate mixes Count the headphone and line outputs you need, then check the signal routing in the manual. Focusrite states that the headphone output and line outputs 1–2 on the Scarlett 2i2 4th Gen share the same signal source. If you want to connect a separate mix or other equipment as well as your own headphones, routing is key; around 29% of consumers in this buying context give separate monitoring routes top priority.
Inputs and monitoring Count the microphone, line and instrument sources you’ll record at the same time. Check direct monitoring separately from monitoring software instruments or effects in your DAW. If you record live parts as well as mixing, you’ll want enough simultaneous inputs and a suitable monitoring route; for around 21% of consumers in this buying context, recording is the main reason for choosing an interface.
Computer and power Check the operating system, available USB port and power supply, and whether you’re allowed to install any required drivers on your work computer. Audient specifies USB 3.0 bus power for the iD4 MKII; SSL requires a driver for the SSL 2+ MKII on Windows. If you work at a hot desk or on a managed computer, you’ll want to know whether connecting and installing the interface is practical; around 14% of consumers in this buying context prioritise compatibility with their work computer.

Pitfalls to avoid when choosing

  • Assuming two headphone sockets mean two separate mixes

    The number of connections doesn’t tell you which signals can be routed separately. According to Focusrite, the headphone output and line outputs 1–2 on the Scarlett 2i2 4th Gen share the same signal source.

    Check both the physical outputs and the mix routing for the exact model in its manual.

  • Choosing extra recording inputs when you only mix existing tracks

    If you only play back and mix existing string tracks, you won’t use the extra microphone inputs for that task.

    Make a note of the sources you want to record at the same time, then choose the number of inputs you need.

  • Assuming any compatible USB connection will be enough

    The connection, power requirements and any drivers needed vary by model. A plug fitting the port doesn’t confirm that the computer can supply enough power.

    Before choosing a model, check your computer or dock’s port and power supply, the operating system and your permissions to install software.

  • Trying to drown out office noise by turning the volume up

    The World Health Organization identifies both listening level and listening duration as factors in safe listening.

    Keep the volume at a sensible level, and raise persistent noise issues as a matter of workplace design too.

Brands to consider for this choice

Focusrite

The Scarlett 2i2 4th Gen suits a straightforward two-channel setup; the Scarlett 4i4 4th Gen is worth considering if you need separate mixes or more line outputs.

  • Focusrite says the 4i4 4th Gen has separate mixes for its headphone and line outputs.
  • On the 2i2 4th Gen, the headphone output and line outputs 1–2 share the same signal source. Check the routing for the model you choose.

MOTU

The M2 is worth considering if two analogue inputs, clear level meters and five-pin MIDI connections suit your mixing and recording work.

  • MOTU specifies two combo inputs, balanced TRS line outputs, MIDI and a headphone output with its own volume control.
  • The stated driver latency applies under the buffer and sample-rate conditions specified by MOTU; you won’t necessarily get the same results with every computer or DAW session.

Audient

The iD4 MKII is a compact option with a microphone/line input, a separate instrument input and two headphone socket sizes.

  • Audient specifies direct monitoring and power via USB 3.0.
  • Check that the computer port you’re using meets the power requirements. Two headphone sockets don’t automatically mean you can route two separate mixes.

Solid State Logic

The SSL 2+ MKII is worth considering if you need two independently controlled headphone outputs or extra line outputs.

  • According to the SSL manual, the 2+ MKII has two independent headphone outputs and four balanced outputs.
  • SSL requires the manufacturer’s driver to be installed for this model on Windows. These features apply to the 2+ MKII and not automatically to the SSL 2 MKII.

PreSonus

The Studio 24c is worth considering if you combine mixing with recording through two inputs and want to use direct monitoring for an input.

  • PreSonus specifies two inputs, MIDI in and out, a Mix control and one headphone output.
  • Direct monitoring of an input doesn’t guarantee that software instruments or DAW effects will play without latency.

Audio interfaces on Joybuy

Related products coming soon.

Frequently asked questions

Do you need two microphone inputs to mix existing string tracks?

No, not if you’re only playing back and mixing existing tracks. Choose your inputs based on the sources you also want to record at the same time. Before you buy, check that your headphones and output route are suitable for listening.

Does direct monitoring automatically eliminate latency from a software instrument or DAW effect?

No. According to PreSonus, the Studio 24c’s Mix control blends the analogue input signal with playback from the computer. This describes monitoring an input; it doesn’t guarantee zero latency for software instruments or DAW effects.

What should you check before connecting an interface to a managed office computer?

Check the operating system, USB port and power supply, and whether you’re allowed to install any required drivers. SSL requires the manufacturer’s driver for the SSL 2+ MKII on Windows; Focusrite specifies a USB power requirement of 1.5 A or a separate 5 V connection for the Scarlett 4i4 4th Gen.

What are your rights as a Dutch consumer when buying online or if a product is faulty?

According to the Government of the Netherlands, online purchases from a business often come with a 14-day cooling-off period; exceptions and the identity of the seller matter. If a product is faulty, contact the seller to arrange an appropriate solution. The Government of the Netherlands states that statutory warranty in the Netherlands does not have one fixed general time limit.

Are there noise rules for working in a shared office?

Dutch workplace noise regulations focus on employees’ exposure and employers’ responsibilities in the workplace; simply working in a shared office doesn’t mean there’s a specific decibel limit for choosing an audio interface. Arboportaal also notes that disruptive noise can be a potential workplace risk. Discuss workplace arrangements and listening volume; the World Health Organization advises taking both volume and listening duration into account.