Who might need an audio interface?

Mixing strings on headphones

You mainly work with existing recordings or virtual strings and want to assess a single stereo mix. First check whether your current listening connection does the job; extra recording inputs aren’t a goal in themselves for this workflow.

Recording string instruments

You want to record an instrument through a microphone or instrument input as well as mix. The number of inputs you can use at the same time, and how you listen while playing, are key considerations.

Creating a separate listening mix

You want a headphone mix with different routing from the main output, perhaps for cueing tracks. Check that the outputs and software support independent routing; the number of headphone sockets alone doesn’t tell you that.

What should you look for when buying?

Using your existing audio output

Choose this if: you only mix digital string tracks and can connect your current headphones or speakers without any problems.

Bear in mind: this won’t give you extra microphone or instrument inputs, or separate outputs.

A compact interface with two inputs and outputs

Choose this if: you want to listen to one stereo mix and may also want to record one or two suitable sources.

Bear in mind: a headphone output with its own volume control doesn’t automatically provide a separately routable mix.

An interface with more separate outputs

Choose this if: you genuinely need a separate cue or headphone mix, or extra outputs for external equipment.

Bear in mind: extra physical connections alone don’t prove that you can create the independent mix you want.

What to consider What should you check? Who is this important for?
Listening to a stereo mix Check whether your current connection is adequate. If you’re considering an interface, look at its stereo monitor outputs, headphone socket and controls. If I mainly mix existing string tracks, I want to assess them through my headphones or speakers without unnecessary recording features. Around 30% of consumers say their main need is a usable stereo mix without an extra device.
Recording string sources Count the microphones, instruments and line-level sources you want to use simultaneously as separate inputs; the total number of inputs isn’t the same as the number of microphone inputs. If I record string instruments myself, the interface needs to support the sources I use at the same time. Around 30% of consumers say recording string instruments is their main need.
Space and cabling Allow room for plugs and controls too. Check where the cables come out and whether your computer port supplies enough power. If there’s little free space on my desk, I want to be able to position and operate the interface with the cables connected. Around 20% of consumers say a compact desk setup is their main need.
Independent listening mix Check both the physical outputs and the routing in your software; an extra headphone socket may play the same mix as the monitor output. If I need a different cue or headphone mix from the main output, I want to know whether I can route it independently. Around 20% of consumers say separate audio routing is their main need.

Common pitfalls

  • Confusing the total number of inputs with the number of microphone inputs

    With the Focusrite Scarlett 2i2 4th Gen, connecting a jack to the front disables the corresponding microphone input. The Audient iD4 MKII has a microphone preamp and an instrument input; these aren’t two independent microphone preamps.

    Work out which sources you want to connect at the same time, and count microphone, instrument and line inputs separately.

    If the number or type of inputs isn’t right for you, you may need additional recording equipment.

  • Assuming a second headphone socket gives you an independent mix

    Arturia says the MiniFuse 2’s headphone output mirrors the monitor output. According to Ableton, you need separate stereo outputs to create a separate cue mix in Ableton Live.

    Check the routing for the exact model and whether your software can send the headphone mix you want.

    A separate mix may require extra outputs or additional equipment.

  • Measuring only the casing

    Connected USB, monitor and headphone cables stick out and need extra room, so the casing dimensions alone don’t show how much space you’ll need.

    Measure with your planned plugs connected and leave room to operate the controls.

    The cables can affect where and how you set up the interface on your desk.

Brands to compare

Focusrite

The Scarlett 2i2 4th Gen is a compact two-channel option for recording and one main output; the Scarlett 4i4 4th Gen adds line outputs 3 and 4.

  • Focusrite says the 2i2 has two microphone inputs and two balanced monitor outputs.
  • On the Scarlett 2i2 4th Gen, using a front jack disables the corresponding microphone input. The 4i4’s four outputs don’t, in themselves, prove that you can create an independent headphone mix.

MOTU

The M2 has two combination microphone, line or instrument inputs and is designed for a compact desk setup.

  • MOTU lists MIDI in and out, two balanced TRS line outputs and mirrored RCA outputs.
  • The RCA connections aren’t an extra independent pair of outputs. A latency figure quoted by the manufacturer applies to specific test settings and isn’t a guarantee for every computer.

Arturia

According to Arturia, the MiniFuse 2 combines audio connections, MIDI and a USB hub function.

  • Arturia describes balanced monitor outputs and a headphone output with its own volume control.
  • The headphone output mirrors the monitor output. Arturia also says that a passive USB hub may not supply enough power.

Audient

The iD4 MKII is an option if you’re looking for one microphone input and one instrument input, with headphone monitoring.

  • Audient’s specifications distinguish between a microphone preamp and a D.I. instrument input, and list two analogue input channels.
  • Two analogue input channels don’t mean two independent microphone preamps. Also check that your computer’s USB power meets the stated requirements.

Solid State Logic

The SSL 2 MKII could be worth considering if two physical headphone sockets would be useful for your setup.

  • Solid State Logic lists two headphone outputs on the front.
  • Without checking the routing, two sockets don’t prove that you’ll get two different stereo mixes. The manufacturer’s statement about driving different headphones isn’t an independent listening test.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need an audio interface if I’m only mixing digitally?

Not just for extra recording inputs: if your current audio output already connects to your headphones or speakers properly, first consider which specific listening or routing feature you’re missing. An external interface is useful if, for example, you need microphone or instrument connections, extra outputs or direct monitoring.

How can I reduce latency when playing along during a recording?

Ableton describes direct monitoring as a way to hear the input signal through the interface rather than sending it through the software first, provided your interface supports the feature. If you use direct monitoring, turn off software monitoring for the same recording track. If you want to hear DAW effects while playing, check the software monitoring signal path.

Which cables and power requirements should I check when setting up?

Match your cables to the connections on your interface and active monitors. For the MiniFuse 2, Arturia recommends using balanced TRS cables where possible and warns that some passive USB hubs don’t provide enough power.

What about returns and guarantees in the Netherlands?

According to ACM ConsuWijzer, online purchases generally come with a 14-day cooling-off period from the date of receipt, with some exceptions. The legal guarantee is separate from any commercial guarantee period: if a product develops a fault sooner than you could reasonably expect under normal use, the seller must provide an appropriate solution free of charge.

What should I know about EU product rules for an audio interface?

The relevant European product rules apply to electrical and electronic equipment sold in the Netherlands. According to Business.gov.nl, the responsible market operator must ensure compliance and provide the required documentation, including an EU declaration of conformity, where the rules require it. CE marking isn’t a quality mark or proof that an interface sounds better; check the documentation for the specific model, especially if it’s imported from outside the EEA.