Who is this buying guide for?

Anyone mixing existing string recordings

You want to assess the stereo mix through suitable headphones or speakers, without paying for recording features you don’t need. Focusrite and MusicTech highlight monitoring connections as a key consideration when choosing an interface.

Anyone with limited power sockets

You’re looking for a compact interface that may be powered by your computer, so you’ll need to check that its USB port can supply enough power. Focusrite, MOTU and Audient outline the power requirements for their models.

Anyone recording string parts as well

As well as mixing, you want to connect microphones or instruments, so you’ll need enough inputs for all the sources you plan to use at the same time. Focusrite, MOTU and MusicTech highlight connections and recording requirements as factors to consider.

What should you look for?

Start with your listening setup and USB power. Only factor in recording inputs and extra outputs if you’ll use them in your setup.

What to consider What should you check? Who is this important for?
Listening to your existing mix clearly Check the headphone output and the connection for your active speakers. If I’m mixing existing string recordings, I want to assess them properly through my headphones or speakers; around 34% of consumers prioritise suitable monitoring.
Power without an extra socket Compare the exact model’s power requirements with your computer’s USB port. With limited power sockets, I want to know whether my computer can power the interface; around 33% of consumers prioritise power without an extra socket.
Recording new string parts Count the sources that need to be connected at the same time and check which input types are suitable. If I’m also recording new parts, I want enough suitable inputs for all my simultaneous sources; around 20% of consumers choose an interface primarily for its recording inputs.
An extra listener or listening route Check the headphone outputs, separate volume controls and routing in your DAW. If someone else needs to listen at the same time, I want to know whether they’ll have their own volume control or signal route; around 13% of consumers prioritise extra listening options.

Common pitfalls

  • Assuming every USB port supplies enough power

    USB power depends on the port and the exact model. Focusrite describes a warning that appears when there isn’t enough power; for the iD4 MKII, Audient specifies a minimum of 0,9 A at 5 V through at least one USB 3.0 port.

    Before relying on the interface without a separate power adapter, compare the model’s power requirements with your computer’s port.

    You may need an extra power supply or a different compatible port on your computer.

  • Confusing physical outputs with independent mixes

    MOTU states that the M2’s RCA outputs mirror its TRS outputs. Likewise, the SSL 2+ MKII’s four balanced outputs don’t, on their own, prove that your DAW can send separate mixes to them.

    Check both the interface’s connections and the routing in your interface and DAW to make sure they support the listening routes you need.

    If the separate listening route you want isn’t available, you may need additional equipment.

  • Using direct monitoring to assess an edited track

    Direct monitoring lets you hear a live input signal. That’s different from listening to an edited string recording played back through your DAW.

    When making mixing decisions, listen via your DAW’s output. Use direct monitoring when you want to hear a live source.

Brands to compare

Focusrite

The Scarlett 2i2 4th Gen is an option for stereo monitoring if you also want to record sources.

  • Focusrite specifies separate controls for the headphones and main outputs, two balanced line outputs and USB power.
  • On this model, connecting a jack disables the corresponding XLR input. Check that your USB port can also supply enough power.

MOTU

According to MOTU, the M2 combines USB bus power, stereo monitoring and two combination inputs for recording.

  • MOTU lists separate volume controls for the headphones and monitors.
  • The RCA outputs mirror the TRS outputs, so they don’t provide a separate second stereo mix.

Audient

The iD4 MKII is a compact option if you want to use a microphone and instrument input alongside your monitoring setup.

  • Audient specifies bus power of at least 0,9 A at 5 V through at least one USB 3.0 port.
  • Check that your computer’s port meets this specific power requirement.

Solid State Logic

The SSL 2+ MKII is designed for setups with two headphones, each with its own volume control, or with extra outputs.

  • SSL specifies two independently controlled headphone outputs and four balanced outputs.
  • Check separately that your DAW supports the routing you want; the number of connections doesn’t guarantee it.

PreSonus

According to PreSonus, the Studio 24c is a USB-powered 2-in/2-out interface for recording and stereo monitoring.

  • PreSonus lists two microphone, line or instrument inputs, direct input monitoring and two balanced main outputs.
  • Direct input monitoring is for hearing the live input signal; it’s not the same as listening to the edited mix from your DAW.

Joybuy products

Related products coming soon.

Frequently asked questions

Do you need recording inputs to mix string recordings that have already been recorded?

No, not for playing back existing recordings. First, choose a suitable listening connection and computer connection; recording inputs matter when you want to record new parts.

Why might a USB-powered interface still need extra power?

USB bus power only works if the computer’s port supplies enough power. Focusrite says that a flashing red USB symbol on the Scarlett 2i2 4th Gen indicates insufficient power; for the iD4 MKII, Audient specifies a minimum of 0,9 A at 5 V through at least USB 3.0.

How do you listen to the edited mix rather than just the direct input signal?

Set your interface as the playback route in your computer and DAW, then listen to the DAW output. Direct monitoring is for hearing a live input signal; check your monitor settings when assessing effects or edited tracks.

What compliance information is relevant for an audio interface sold in the Netherlands?

Sellers must comply with applicable European rules. According to Business.gov.nl, CE marking and an EU declaration of conformity apply to equipment subject to these requirements; check which rules apply to the exact model.

Can you return an interface bought online if the connection isn’t suitable?

For online purchases, you generally have a statutory 14-day cooling-off period after delivery, according to ACM ConsuWijzer. Also check any exceptions that apply to the product.